Hardware Specification
ES2486dc-2142IT-128G
CPU Intel® Xeon® D-2142IT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per
controller
CPU Architecture 64-bit x86
Floating Point Unit Yes
Encryption Engine Yes (AES-NI)
System Memory 64 GB RDIMM DDR4 ECC (4 x 16 GB) per controller
Maximum Memory 512 GB (8 x 64GB)
Memory Slot 8 x R-DIMM/LR-DIMM DDR4
Flash Memory 4GB (Dual boot OS protection)
Drive Bay 24 x 2.5-inch
Drive Compatibility 2.5-inch bays:
2.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA solid state drives
Hot-swappable Yes
SSD Cache Acceleration
Support
Yes
Read cache only
Cache for Copy To Flash
(C2F)
1 per each controller (64GB)
Gigabit Ethernet Port
(RJ45)
3 for each controller (one for remote management)
10 Gigabit Ethernet Port 4 x 10GbE SFP+ for each controller
Jumbo Frame Yes
PCIe Slot 2
Slot 1: PCIe Gen 3 x8 (CPU)
Slot 2: PCIe Gen 3 x8 (CPU)
USB 3.0 port 2 per each controller
Form Factor 2U Rackmount
LED Indicators System Power LED (Green): on/off
System Status (Green/ Orange): in operation, system errors, low power, degraded
RAID mode, memory failure, fan/power supply failure, system/disk temperature too
high, storage pool reaching threshold value, system performing take-over, power
supply unit unplugged
LCD Status Display (Two-digit number): Status of JBOD connection
Buttons Power, Reset