Pyle Pro PRJG74 User Manual

IMPORTANT SAFETY INSTRUCTIONS:

1.1 Please read this user manual carefully before using the projector

1.2 To ensure stable power supply, please use national standard power cable and power cord with grounding.

1.3 Please use the power supply and power cable indicated on the projector or the manual.

1.4 This warranty does not cover defects resulting from improper or unreasonable use or maintenance, failure to follow operating instructions as mentioned in the technical documentation.

1.5 Do not look into the lens when the projector is on.

1.6 Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating.

1.7 Do not place ower vases, pots, cups, cosmetics, liquids such as water, etc. on or around the projector.

1.8 Do not use the projector where it may be exposed to rain, water, or excessive humidity.

1.9 Unplug the projector when it will not be used for extended periods.

1.10 Use foam or other unti-shock material to protect projector if you need to transport the PRJG74.

1.11Do not repair this unit by yourself. Please see your dealer for all service, repairs or maintenance.

INTERFACE INTRODUCTION:

INPUT

1. Lens

(Avoid staring at the lamp when projector is on)

2. Manual focus

3. Keystome

4. Power input

5. Power button

6. OK

7. Right

8. Left

9. ESC

10. Input

11. IR receiver

12. VGA

13. Earphone slot

14. AV input

15. USB input slot

16. 5V-Out

17. HDMI input slot

18. SD card slot

19. Light on

REMOTE CONTROL INTRODUCTION:

Play/Pause

Power

Mute

Left

Return

Vol -

Right

Down

Signal Source

Vol +

Menu/shortcut

Notice:

Do not put an old battery and a new battery together in the same device.When the remote will not be used for a long time, remove the batteries to avoid damage caused by battery leakage and corrosion. As you use remote control, please take the remote control with the projector infrared ray receiver slot.

USER MANUAL:

4.1 Preparation before light on

4.1.1 Follow the image below and connect the power adaptor.

4.1.2 The power indicator lights up

4.2 Power on/Power o Press “ “button or press remote control to turn the projector on.

Projector Remote Control

4.3 Multimedia Boot Screen

As the projector starts working, the screen displays (about 2-5 seconds) then the multimedia screen.

4.4 Focus & Keystone

4.4.1 Keystone Use the keystone button''3'' to adjust twisted images. Keystone correction technology refers to a kind normalizing the twisted image via digital or optical technology.

4.4.2 Image Focus

Place the projector vertical to the projector screen or white wall, adjust the keystone ''2'', until the image is clear. You can display video or display the menu to check the focus adjustment while focusing.

Solution

Our projector provide optical keystone function,you can turn the keystone and adjust the image.

Solution

If the projector have no keystone function and the projector is vertical with the project screen, please adjust the projector to the same level.

PROJECTOR CONNECTION INTRODUCE:

5.1 Connection Introduce

"Connect multi-device and applications.

5.2 Multi-Media Connection

5.2.1 Insert the USB/SD card into the accordingly slot. (see picture).

5.2.2 Choose multi-media signal source. (factory setting USB/SD card outlet)

Multimedia Supported Format

Multi

media

Audio le

Video le

Text le

MP3/WMA/ASF/OGG/AAC/WAV

3GP(H.263,MPEG4)/AVI(XVID,DIVX,H.264) MKV(XVID,H.264,DIVX)/FLV(FLV1)MOV(H,264) MP4(MPEG4-PS)/MPG(MPEG1)/VOB(MPEG2) MPG(MPG-PS)/RMVB(RV40/RM

TXT

55.2.3

Choose the content you need display: Video, Music, Photo Text

5.2.4

Choose the le which you want to display, press '' " display or stop.

JPEG/BMP/PNG

5.3 AV Video Equipment Connection

Use 3 in 1 video converter cable. Connect projector AV slot. (reer to the image below) Connect and choose the signal source video.

Supported format NTSC, PAL

5.4 HDMI Equipment Connection

5.4.1 HDMI slot could connect computer and dierent device with HDMI slots. Choose the signal source HDMI when connected

Supported le

576P, 480P, 720P, 1080P, 640x480,

800x600, 1024x768, 1280x1024,

1280x720, 1440x900, 1920x1080,

1366x768, 1280x800, 1440x690,

1600x1200, 1680x1050

5.4.2 Our projector support HDMI slot and MHL cable and iPush. You can use your mobile and tablet content projector.

"Please consult the factory or agency to conrm if your device and

cable is supported"

5.5 3.5mm Audio Device Connection

5.5.1 Connect 3.5mm earphone and speaker equipments.

Notice:

Dolby copyright. This projector is not supported by Dolby related decode.

5.6 Other Connections

USB output 5V for mobile and tablet power supply.

MENU GUIDE

6.1 Menu set

6.1.1 Image set Remote Control User Guide: Press key, then the main menu will display, press key, choose submenu image, press key and choose the program you want to adjust, then press ok.

You can set the following modes such as image mode (text video picture user dened) colour temperature (cold,hot,user dened),zoom mode (auto,4:3, 16:9 point-to

-point, panoramic,zoom1, zoom2, scan) denoise (close, low,middle,high,tacitly approve)

6.1.2 Audio Submenu Press key,go to the main menu then press choose audio submenu, press choose the item you need to adjust,then press OK.

In audio, you can set the sound mode(music,power,sport, user, balance(-50-+50),auto volume (open,o) surround(close, surround,SRS)balance(120Hz, 500Hz,1.5Hz,5kHz,10kHz).

6.1.3 Time Submenu Press key on the remote control to go to the main menu, then press choose time submenu, press choose the item you need to adjust, then press OK.

Set the language in language menu,back to factory set and software upgrade

6.1.4 Set Submenu Press key on the remote control,then press key to set submenu.Press key and choose the program you need to adjust and press OK.

6.2 Display Menu User Guide Control the content on the display menu.

TECHNOLOGY FEATURES:

7.1 Basic parameters

Imaging Technology

Brightness

Contrast

Resolution

Highest Resolution

Light

Life Span

Lens

Operation Mode

Throw Distance

Screen Size

Aspect Ratio

TFT LCD

1200 Lumens

1000:1

800*480RGB

1920*1080

LED

30000 hours

Multichip Coated Lens (F=125)

Manual operation

1.5 - 4M

50-130 inches

4:3/16:9

Color Reproduction

Keystone

Power Voltage

Intergrated watt

Output

Speaker

System Support

Lanuage support

Unit Size

Projector Ratio

Net Weight

7.2 Project Distance & Size

16.7M

Manual correction ±15°

100V-240v-50/60Hz

50W(max)

Earphone USB(5v-500MA)

8Ω2W

Support multimedia

Support 23 Languages

200.5*145.*75.3mm

1:1.4

0.89 KGS

Due to continuous improvement,

actual product may dier from the manual.

Manual is for reference only.