www.pyleaudio.com
User Manual
PPHP1247UIB /PPHP1547UIB
Safety Precautions
Repairing and installation of this speaker cabinet must be carried out by qualified personnel following the approved safety standards.
Do not attempt to clean the plastic enclosure with solvents or petrochemical based cleaners.
Do not expose the speaker cabinet to direct rain or stand in water. If liquid is allowed to enter the enclosure, a short circuit will be result and will be hazardous.
Do not stack the speaker cabinet in a way that could cause injury should the cabinet become dislodged and fall.
Additional Precautions for this series of Amplified Speaker
Before installation, ensure that the voltage and frequency of power outlet match the power requirements of the loudspeaker.
Disconnect from main power before to make connections in the loudspeaker.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the power-cord come into contact with other cables. Only handle the power-cord by the plug.
If you need to replace the fuse , it must be replaced with same rated Amperage and size.
Attention
Before connecting or operating your new loudspeaker, please study the accompanying instruction manual paying special attention to the operating precautions and wiring procedure.
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Loading...