Pyle Pro PPG260A Owner's Manual

R

Owner's Manual

PPG260A

Guitar Amplifier

1

4

R

www.pyleaudio.com

www.pyleaudio.com

2

3

1) Power Switch: Switches amplifier on/off.

2) Power LED: Illuminates when power is switched on.

3) Input Jack: Connect your instrument to this jack.

4) Volume: This sets the volume gain level.

5) Bass: This control adjusts the low frequency level.

6) Treble: This control adjusts the high frequency level.

7) Phones Jack: This is your headphone connection.

Inserting the headphones disables the internal speaker
(great for practicing).

1) Voltage Selector: 110/220 Volt Selectable Switch.

2) Power Cord: Connect cord to an AC outlet.

Troubleshooting

Distorted Sound:

Check if the amplifier is overdriven. If it is, you will

have to turn the level down.

Check signal source.

Signal sounds discolored:

Check and adjust the EQ settings.
Ensure you are using quality cables.
Check signal source.

No Sound:

Check connections.
Try a different cable.
Check level on amplifier.
Confirm amplifier is getting a signal.
Make sure nothing is plugged into the Phones jack.

Intermittent Output:

Check connections.
Try a different cable.

Specifications

1

3

4

5

6 7

1 2

Model Driver

RMS

Peak Dimensions

Weight

PPG260A

20W 80W

6 .5" High
Definition

Speaker

W=9 2/3"
H=10 1/4"
D=6 1/4"

9.37lbs

2