Page 1
USER MANUAL
TITLE GUITAR AMPLIFIER
MODEL PVAMP30
：
：
www.pyleaudio.com
Page 2
VOLUME
INPUT
Functions
PVAMP30
GAIN
SELECT
VOLUME
PVAMP30
BASS
MIDDLE
TREBLE
HEADPHONE
OUTPUT
POWER
11
1. INPUT This is an instrument input for plugging in
virtually anything.
2. VOLUME This is the overall level control for the
normal channel.
3. GAIN This is the distortion intensity control
for the overdrive channel.
4. SELECT This switch is select the drive channel or normal
channel.
5. VOLUME This is the overall level control for the
overdrive channel.
6. BASS This equalization control adjusts the amount of
boost in the low frequency range.
7. MIDDLE This equalization control adjusts the amount of
boost in the middle frequency range.
8. TREBLE This equalization control adjusts the amount of
boost in the high frequency range.
9. OUTPUT This is a 1/4"jack for hooking up external speakers
to the amplifier.
10.HEADPHONE This is a 1/4"3-conductor stereo headphone jack
for plugging in headphones.
11. POWER This on/off switch provides power the unit.
TECHNICAL SPECIFICATIONS
Power
Rated Power
Load Impedance
Speaker
Signal/Noise Ratio
Frequency Response
Dimension
Weight
CAUTION:
WARNING:
CHASSIS SURFACE HOT.
TO R EDU CE THE RI SK OF FIR E OR
ELECTRIC SHOCK,DO NOT EXPOSE
TH IS EQ UIPME NT TO RAI N OR MO ISTUR E.
AVIS:
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
ATTENTION:
SU PER FICIE D E CHASSIS CH AUDE.
45 Watts Peak
~110V, 60 Hz
4 Ohms
6
70dB
20 HZ to 1 6KHZ
13.2*7.7*11.6 (in)
13.2LBS
Loading...