Page 1
PUNP37BT
INSTRUCTIONS MANUAL
CLASSICAL USB PLAYER WITH AM/FM
RADIO, BLUETOOTH, AUX-IN
Page 2
CAUTION
IMPORTANT SAFETY INSTRUCTIONS
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG
WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning ash with
arrow head symbol, within
an equipment triangle is
intended to alert the user to
the presence of uninsulated
‘dangerous voltage’ within
the product’s enclosure
that may be of sufcient
magnitude to constitute
a risk of electric shock to
persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK), NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to
the presence of operating
and maintenance (servicing) instructions in the literature accompanying the
appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1) Please read these instructions and keep them for future reference.
2) Pay attention to all warnings.
3) Follow all instructions.
4) Do not use this apparatus near water.
5) Clean only with a dry cloth.
6) Do not block any ventilation openings.
7) Install in accordance with the manufacturer’s instructions. Do not
install near any heat sources such as radiator s, heaters, stoves, or other
apparatus (including ampliers) that produce heat.
Page 3
8) Protect the power cord from being walked on or kinked, in particular
where the plug is tted and at the point where it exits from the
apparatus.
9) Only use attachments I accessories specied by the manufacturer.
10) Unplug this apparatus during lightning storms or when unused for
long periods of time.
11) Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
12) This appliance should not be exposed to dripping or splashing water
and no object lled with liquids, such as vases, should be placed on
the apparatus.
13) Do not overload the wall power outlet. Use only power source as
indicated - i.e.120V AC mains.
Avoid installing this unit in places exposed to direct sunlight or close to
heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or
dusty areas, places subject to constant vibration and/or humid or moist
areas. Do not attempt to clean this unit with chemical solvents as this
might damage the nish. Use a clean dry cloth. Operate controls and
switches as described in the manual Before turning On the power, make
certain the AC power cord is plugged in. When moving the set, be sure to
rst disconnect the power cord.
IMPORTANT NOTES
Page 4
POWER SOURCE
This product is designed to operate on 120V 60Hz
AC Mains only. Attempting to operate this
system from any other power source may
cause damage to the system, and such
damage is not covered by your warranty.
NOTE:
You will note that this system is equipped with domestic standard AC
power 2-pin plug. If this plug does not t into your existing.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made
from nonmigrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil
based furniture polishes, wood preservatives, or cleaning sprays may
cause the rubber ‘feet’ to soften, and leave marks or a rubber residue
on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available
at hardware stores and home improvement centers everywhere, and
apply these pads to the bottom of the rubber ‘feet’ before you place
the product on ne wooden furniture.
Page 5
FRONT PANEL
LOCATION OF CONTROLS AND INDICATORS
1. Pointer
2. BLUETOOTH Indicator
3. Tuning Knob
4. AM/FM Dial Scale
5. Functions Knob (AM/FM/AUX/ BT)
6. Headphone Jack
7. AUX IN Jack
8. Power Indicator Light
9. USB/ON/OFF Button
10. Backward Skip Button
11. Play/Pause Button
12. Forward Skip Button
13. USB Indicator Light
14. USB Socket
15. Speakers
16. Volume/Off Knob
BACK PANEL
17. FM Wire Antenna
18. AC Power Cord
Page 6
OPERATING INSTRUCTIONS
Radio Operation
1. Turn the unit on by rotating the VOLUME/ON/OFF Knob located of
the front
panel to the on position.
2. Rotate the functions knob to select AM or FM mode.
3. Select the desired station by rotating the TUNING knob.
4. Adjust the VOLUME knob to the desired sound level.
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfactory, Try repositioning the cabinet slightly until the internal antenna
is picking up the strongest signal. The FM wire antenna is located on
the back of the cabinet. If necessary, adjust the position and direction of this antenna until you nd the position that provides the best
reception.
USB Operation
1. Insert the USB into the USB socket.
2. Press the USB ON/OFF button to set the USB function on.
3. Playback will start automatically, and the USB indicator will
remain on.
4. Adjust the VOLUME knob to the desired sound level.
5. To pause playback, press the PLAY/PAUSE button.
6. Press the Forward Skip button or Backward Skip button to
select the desired track.
7. To stop playback, Press the USB ON/OFF button again .
BLUETOOTH FUNCTION OPERATION:
1. Rotate the FUNCTIONS KNOB to select BLUETOOTH mode.
2. Turn on your Bluetooth device and scan.lt will be displayed as
“Pyle Radio” when discovered by your Bluetooth device. Enter
password “0000” during pairing if necessary.
Page 7
3. When the unit is paired with your Bluetooth device, you can hear a
short tone from the speakers. Play your Bluetooth device as
you normally do and the sound will be played from this unit.
Then you may enjoy the music.
Note:
1. Make sure your Bluetooth device and this unit is within 1 0 meters
2. Check and see if there are other Bluetooth devices nearby
interfering the signal and connection.
3. This unit is could be paired by multiple different Bluetooth devices,
but could only be connected and played by one of them at a time.
Make sure no others device is actively connected to it already
when you are trying to connect the one you are wording on.
AUXIN OPERATION
1. Rotate the FUNCTIONS KNOB to select AUX mode.
2. Plug the auxiliary cable into AUX IN JACK on the front panel of
the unit.
3. Plug the other end of auxiliary cable into the external devices.
4. Play the external devices as you normally do and the playback
will be played from the unit.
Page 8
HEADPHONE OPERATION
1. Connect a headphone to the HEADPHONE JACK.
2. Adjust VOLUME KNOB to the desired level
NOTE: When using headphone, the sound of the unit speakers will
be cut off.
* Headphones is not included with unit.
Technical Specs:
Digital Audio File Compatibility: MP3 / WMA
Maximum USB Flash/SD Card Support: 32GB
Power: 120V, AC
Dimensions (L x W x H): 10.6’’ x 7.1’’ x 11.0’’
Loading...