Pyle PUCRC99 User Manual
PUCRC99
User Manual
CONTENTS
1. SAFETY INSTRUCTION
2. COMPONENTS OF CLEANER
2.1 PARTS NAME
2.2 TECHNICAL PARAMETER
3. OPERATION INSTRUCTION
3.1 QUICK USER GUIDE
3.2 CLEANING/STOP/SLEEP
3.3 CLEANING MODES SELECTION
3.4 PRE-SET TIMER
4. MAINTENANCE
4.1 CLEANING SIDE BRUSH
4.2 CLEANING THE DUST BOX AND FILTER
4.3 CLEANING THE INFRARED RECEIVER
AND CHARGING CONNETOR
1
2-4
2-4
4
5-8
5
6
6-7
8
9-11
9
9
10
4.4 ASSEMBLY THE MOPPING PAD
5. FAILURE CHECKING
6. ACCESSORIES LIST
11
12
13
1. SAFETY INSTRUCTION
Please read the following instruction carefully before using.
● Read the instruction and follow the step on operating the unit.
● Keep this instruction manual for future reference.
● Send this instruction manual if you need third party transfer.
● Do not operate the unit with instruction not mentioned in this manual.
*Reminders
1. Do not disassemble by yourself. Only authorized technician can do repair and replacement.
2. Use only attachments, accessories and spare parts specified by the original manufacturer.
3. Never touch the robot and any other parts including the battery charger, power plug and power
cord, when your hands are wet.
4. DO NOT let machine approach cigarette, lighter, match and other heat objects or combustible
materials.
5. Clean after fully charged. Ensure power switch is OFF before cleaning..
6. DO NOT over bend the wire or put any objects on the top of robot.
7. This robot can be used indoors only.
8. This robot is NOT a toy, sitting or standing on this robot is strictly prohibited.
9. Since this robot is an electrical product, never immerse it in water or use it in moist or wet floors.
10. Before the robot starts the cleaning process, it is suggested to tidy up small items, such as
clothing, power cords, cables, and loose fringes of rugs, to prevent any possible jam of the
robot’s side brush or suction nozzle.
11. Check the anti-falling function first if there is stair or overhanging area. To avoid the possibility
of damage and injury, it is better not to use in area with no protection railings.
12. In case the robot will not be used for a long period of time, turn off power switch and recharge
the battery at least once every 3 months. Then store it in a cool and dry place after it is fully
charged.
13. Ensure the dustbin box, filter and other parts are assembled before use the robot.
14. Ensure the adaptor and charging station are well connected when charging.
15. Do not use robot in extreme environment temperature over 50 or lower than -10.
16. Please switch off robot and remove battery if you need to abandon or throw the unit.
17. DO NOT connect to the adaptor when removing the battery.
18. The battery should be recycled with safe disposal. DO NOT discard or throw it into fire to avoid
accident/explosion.
19. When the robot is working, please pay additional attention to children or pets nearby. It is highly
suggested to keep them away from the robot.
20. This robot is not designed to pick up debris that is still burning, smoking, or wet. It is also strictly
prohibited to use this robot to clean up chemical particles or volatile liquids such like gasoline.
1
2. COMPONENTS OF CLEANER
2.1 Parts Name
LED display
Dustbin release button
Ground detection sensor
Infrared signal receiver
Front bumper
Front wheel
Right side brush
Right wheel
Mop pad
Infrared sensor window
Operate key
Faceplate
Ground detection sensor
Charging electrode
Left side brush
Ground detection
sensor
Suction channel
Left wheel
Air outlet window
DC socket
Power switch
Front cover
Dustbin box
Dustbin box handle
HEPA filter
Dustbin box block
2
Dustbin box cover
2. COMPONENTS OF CLEANER
Control Panel
Turn on or stop
Display screen
Indicator light：
1.Cleaning Mode: Blue Flash Light.
2.Error: Red Flash Light.
3.Charging: Red Flash Light.
4.Full Charging: Blue Lighting
Timer symbol
Current time display
High speed
Charging Station
Infrared signal receiver
Power indicator
Docking hole
Auto cleaning symbol
Clock symbol
Voice symbol
Battery symbol
Connection indicator
Infrared signal emitter
Charging electrode
3
Loading...