Pyle PTV156LC Operating Manual

Model PTC156LC：

16:10 DIGITAL LCD-TV-Monitor

OPERATING MANUAL

15.6 Hi-Definition LCD Flat Panel TV

10

5

FRONT AND BACK
CONNECTIONS
OF LCD TV

3

REMOTE CONTROL

5

4

3

3

12

TV

AINSTALL TION

DRAWINGS

2

1

PREFACE

SAFETY
PRECAUTIONS

Remote control instructions in TV mode

Remote control setup

Turning on and off TV

Select on screen language

Choosing a TV channel

Selecting input source

How to adjust the OSD screen

Volume adjustment

13

13

13

14

14

14

15

15

16

18

20

21

MENU
OPERATION

BASIC
OPERATION

TV OPERATION

6

21

7

8

8

7

6

6

9

Power Cord Connection

AV Connection

PC Connection

S-Video Connection

YPbPr Connection

Antennas Connection

HDMI Connection

Picture menu options

Audio menu options

Setup menu options

Feature menu options

VGA menu options

Component options

HDMI and S-VIDEO menu options

Contents

1

COMPONENT VIDEO GAME DVD CABLE BOX(// )

9

23

TROUBLESHOOTING
AND ADVICE

7

24

SPECIFICATIONS

8

2

3

1. PREFACE

Thank you for buying this TV ! Please read this manual throughly before operating the TV.
Make sure the TV was not damaged in transit. Should the TV is damaged, do not install
Your dealer. Check that you have all the accessories according to the model.

it and contact

2. SAFETY PRECAUTIONS

Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the TV to fall.

Minimum distances

10cm

20cm

10cm 5cm

Put the TV on a stable surface.

Do not place any material on the TV.

Do not block or cover the ventilation openings on the TV.
If you have a wall mount, check that it is steady.

Do not use the with fixtures other than those provided or

suggested by the manufacturer.

TV

4

Keep the TV dry and away from humidity.

Keep the TV away from heat sources

.

Unplug the before cleaning it. Do not use solvent or liquidTV to clean
the TV.

Only clean the TV with a soft and dry cloth.

In case of troubleshooting, do not use spare parts other than those
suggested by

the manufacturer. Using inadequate spare parts can

shocks, short-circuits fire or other incidents.lead to electric

Unplug the TV during lightening storms or when unused for long periods
of time.

5

3. Front , Back , Connections of LCD

Front View

Back View and Control Connections

SOURCE

MENU

CH-

CH+

VOL-

VOL+

POWER

12

3

4

5

67

5oAUDIO: Connect theAudio output jack f.PC

PC.

2. PHONE: Connect the headphone.

1. DC IN: DC input socket.

L/R(AUDIO) : Connect the Audio out put ack

j

of DVD ,VCR or PC for Video/S-VIDEO/YPbPr.

3. Video

V( ) Connect the Video output jack of:

.DVDorVCR

4. YPbPr: Connect the YPbPr output jack of

DVD or VCR.

6. VGA: Connect the PC-RGB output jack of PC.

7. HDMI: Connect the HDMI output jack of DVD.

8. S-VIDEO: Connect the S-VIDEO output jack

ofDVDorVCR.

9

. RF: Connect the antenna.

VGA

HDMI

S-VIDEO

RF

YPr

Pb

L

R

DC

12V

PHONE

PC

AUDIO

V

3

12

4

5

678 9

1. Press POWER button to turn standby mode“”

on or off.

4. Press MENU to bring up the main menu on“”

the screen.

5. Press to select the input source.“”SOURCE

2. Press VOL+ or VOL- to increase or“”“”

the sound level.decrease

6 POWER INDICATOR: show red in standby mode,.

show green when your TV is switched on.

7. REMOTE SENSOR: infrared sensor for the rem
control.

3. Press CH+ or CH- to scan through channels.“”“”

6

Power Cord Connection

4. TV INSTALLTION DRAWINGS

DC

12V

ConnectionAntennas

75 OHM
ANTENNA
PLUG

POWER PLUG OF
ANTENNA
AMPLIFIER

OUTDOOR
ANTENNA
AMPLIFIER

VHF ANTENNA UHF ANTENNA

INDOOR
ANTENNA
AMPLIFIER

RF

1. Connect the power cord correctly as shown.

2. Press the POWER switch of your LCD V to switch on the LCD TV. The power indicator on the
panel lights up in Green

T

front .

To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as
Shown above can be sourced from TV equipment shops, which will provide service for correct
installation and connection. After installation, insert the 75-ohm antenna plug into the antenna jack
shown above.

as

7

PC Connection

Stereo Audio Cable

AUDIORGB-PC OUTPUTRGB-PC OUTPUT

PC IN

S-Video Connection

DVDorVCR

DVD or VCR Back

AUDIO

S-VIDEO Cable

Audio Cable

TV Back

TV Back

Connect the S-VIDEO output of the DVD or VCR to the S-VIDEO input on the set. The picture quality
is improved compared to connecting a regular VCR to the video input.
Connect the Audio output of the DVD or VCR to the Audio input jacks on the set using the RCAcable.
Select S-VIDEO input source with using the SOURCE button .

Connect the RGB output of the PC to the VGA in jack on the TV set. Connect the PC AUDIO
output of the PC to the PC AUDIO in jack on the TV set.Select VGA input source using
SOURCE button.

with

8

YPbPr Connection

Pr Pb Y

LR

RCA Video Cable

RCA Audio Cable

DVDorVCR

DVD or VCR Back

TV Back

AV Connection

1

Video CableVideo Cable

VLRV LR

DVD orVCRDVD orVCR

DVDorVCRBackDVD or VCR Back

TV Back

Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture quality is
improved; compared to connecting a regular VCR to the video input. Connect the Audio output of
the DVD or VCR to theAudio input jacks on the set using the RCA cable.

Match the jacks colors Y is green Pb is blue Pr is red Audio left is white and Audio right in red
Select YPbPr input source with using the SOURCE button.

:,,, .

Connect the VIDEO and AUDIO output jack of the DVD or VCR to the jacks on the set usingVIDEO
the RCA cable. Select input source with using the SOURCE buttonComposite

.

VGA

HDMI

S-VIDEO

RF

YPr

Pb

L

R

DC

12V

PHONE

PC

AUDIO

V

HDMI Connection

DVD orVCR

DVDorVCR Back

TV Back

HDMI OUT

HDMI Cable

9

Connect HDMI output of the DVD to the HDMI input jack on the set. Select the HDMI input source
with SOURCE button.

WHITE

RED

GREEN

BLUE

RED

Game Systems

AUDIO

COMPONENT VIDEO GAME DVD CABLE BOX(// )

5. REMOTE CONTROL

Remote control instructions in TV mode

POWER

Switch on LCD TV when at standby mode or vice
versa.

MUTE

Press to mute the sound. Press again or press
VOL+ to unmute.

10

TV MENU

CCD

DISPLAY

VOL

VOL

CH

CH

-

+

-

+

OK

EXIT

EPGFAV

FAV

+

FAV

-

MTS

POWER

NUMBER BUTTONS

Press 0-9 to select a TV channel directly when you
are watching TV. The channel change after 2 seco­nds.

Press this button to enter a program number for
multiple program channel such as 2-1,etc.

Return to the previous channel viewed.

TV MENU

Brings up the main menu to the screen.

EXIT

Clears all on-screen displays and returns to TV
viewing from any menu.

CCD

Closed caption button.

DISPLAY

Press to display the source and channel’s info­rmation.

Press to cycle through the input source in following:

Ch

Composite Component

VGA

HDMI

SOURCE

S-VIDEO

PMODE

Press repeatedly to cycle through the available video
picture modes.

SMODE

Press to cycle through the different sound settings.

MTS

Audio selection button.

Lets you select amount of time before your TV turn
itself off automatically..

SLEEP

-/- -

-/- -

11

TV MENU

CCD

DISPLAY

VOL

VOL

CH

CH

-

+

-

+

OK

EXIT

EPGFAV

FAV

+

FAV

-

MTS

POWER

THUMBSTICK(/// /OKENTER)

Allows you to navigate the on-screen menus and
adjust the system settings to your preference.

VOL+/-

Press to increase / decrease the sound level.

CH+/-

Press to scan through channels. To scan quickly
channels, press and hold down either +/-button.

FAV

Press to increase the program which you favorite.

Press to enter the favorite menu.

FAV+

Press to descrease the program which you favorite.

FAV-

EPG

Press to enter the EPG menu directly.

-/- -

1.Open the cover

2.AA size batteries, When inserting the batteries, make sure correct polarities as per”+“and ”-“marks
on the batteries and within the battery compartment

3.Replace the battery cover

1.Install all batteries correctly, and as marked on the remote control.

2.Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc)

Remove batteries when the remote is not used for a long time.

To prevent battery leakage which may result in bodily injury or damage to the remote:

Remote control setup

12

Basic operation

Turning on and off the TVTurning on and off the TV

TURN ON LCD TV

1. Connecting to the AC input cable then press the main power switch to switch ON LCD TV. At this time the TV will enter

standby mode and indicator show red.

2. Use POWER button can turn ON LCD TV from standby mode.

TURN OFF LCD TV

1. Press POWER button or button on the remote control to enter standby mode. The indicator is red.

2. Using main power switch turns off LCD TV completely.

Select on screen languageSelect on screen language

NOTE: If you use your LCD TV for the first time, you should select the language which will be used for displaying menus

and indications.

Press to display the main menu.

Press / repeatedly to select the .

Use / and / to select .

ress and button to select your desired language.

MENU

SET MENU

LANGUAGE

P

When you are satisfied with your choice, press the

to exit.

MENU

Volume adjustmentVolume adjustment

1. Press to adjust the volume.VOL+/-

2. If you want to switch the sound OFF , press the MUTE .

3. You can cancel this function by pressing or .MUTE VOL+

13

6. TV Operation

Audio

Setup

Feature

To Move To Select To Exit

Tuning Band

DTV-Signal

Auto Ch Search

AddOnChSearch

Manual Ch Set

Channel Labels

Air

Picture

Menu Language

English

Enter Menu

Reset

Choosing a TV channelChoosing aTVchannel

1. Using the CH+/CH- on the front panel or on the remote control.

Press to increase channel number.CH+
Press to decrease channel number.CH -

2. Using 0-9 digital buttons and -/--button

You can select the channel number by pressing 0 to 9 or -/--.

How to adjust the OSD screenHow to adjust the OSD screen

- Press the button to display the main menu.MENU

- Use / / / buttons to select and adjust the available menus.

The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides
graphical presentation.

Selecting input sourceSelecting input source

You can select the input source by pressing the on the remote control or on the front panel.INPUT

3. Example:

To select 1-digit channel (e.g. Channel 5): Press the 5 button.
To select 2-digit channel (e.g. Channel 20): Press the -/-- button repeatedly to display -- then press 2, follow by 0.
To select 3-digit channel (e.g. Channel 103): Press the -/-- button repeatedly to display -- then press 1, follow by 0,
follow by 3.

Note: After select the digit button, the digit will be memorized.

Audio

Setup

Feature

ToMove ToSelect To Exit

Tuning Band

DTV-Signal

Auto Ch Search

AddOnChSearch

Manual Ch Set

Channel Labels

Air

Picture

Menu Language

English

Audio

Setup

Feature

ToMove ToSelect To Exit

Audio Mode

Audio Language

Bass 30

Treble 30

Balance 0

Voice

Picture

English

Enter

Menu

Enter Menu

Reset

14

Audio

Setup

Feature

ToMove To Select ToExit

Tuning Band

DTV-Signal

Auto Ch Search

AddOnChSearch

Manual Ch Set

Channel Labels

Air

Picture

Menu Language

English

Enter Menu

Reset

Audio

Setup

Feature

To M ov e ToSelect To Exit

Time Set

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

Picture

Off

Enter Menu

ATS C C C

Digital Closed Caption

CC1

C1

S

Picture menu options

Press the MENU on the front panel or on the remote control and then use / to select the Picture menu.

In this manual, the OSD ( On Screen Display) may be different from your TV’ s because it is just example to help the
TV operation.

3. When you are satisfied with your adjustment, press
to exit the main menu.MENU

2. Press and button to adjust.

Contrast

Press / button and then use / to adjust the contrast of the picture.

Brightness

Press / button and then use / to adjust the brightness of the picture.

Sharpness

Color

Press / button and then use / to adjust the color saturation.

Press / button and then use / to adjust the sharpness level of picture.

1. Use / to select what you want to adjust in the

menu.Picture

Picture

Audio

Setup

Feature

To Move To Select To Exit

Picture Mode

Contrast 50

Brightness

Sharpness

Color

Tint

Aspect Ratio

User

Wide

Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE
menu. You may select the picture mode directly by pressing the PMODE button on the remote control.

Picture Mode

Tint

Press / button and then use / to adjust the tint of picture.

Aspect Ratio

Press ◄/► to select the ratio of picture display such as Full-screen/Normal/ Zoom/ Wide and Cinema.

AUDIO menu options

Press MENU on the front panel or on the remote control and then use / to select theAUDIO menu.

15

Enter Menu

50

50

50

50

Ch

Composite

Component

VGA

HDMI
S-VIDEO

MENU operation

3. When you are satisfied with your adjustment, press
or to exit the main menu.MENU EXIT

2. Press and button to adjust.

1. Use / to select what you want to adjust in the
menu.Audio

Audio Language

Bass

Treble

Balance

Press / button and then use / to adjust the audio output between left and right speakers.

Press / button and then use / to increase or decrease the level of the lower-pitched sounds.

Press / button and then use / to increase or decrease the level of the higher-pitched sounds.

Setup menu options

Press MENU on the front panel or on the remote control and then use / to select the Setup menu.

3. When you are satisfied with your adjustment, press
to exit the main menu.MENU

2. Press and button to adjust.

1. Use / to select what you want to adjust in the

menu.Setup

Audio

Setup

Feature

To M ov e To S el ec t To E xi t

Audio Mode

Audio Language

Bass 30

Treble 30

Balance 0

Voice

Picture

English

You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND
menu. You may select the sound mode directly by pressing the SMODE button on the remote control.

Audio Mode

Press ◄ / ►to select one of the audio language such as English/ French and Spain, but the condition is that the program
system has included the language code.

Audio

Setup

Feature

To M ov e To S el ec t To E xi t

Tuning Band

DTV-Signal

Auto Ch Search

AddOnChSearch

Manual Ch Set

Channel Labels

Air

Picture

Menu Language

English

Tuning Band

Press key to select Air, Cable, Cable HRC, Cable IRC or Cable Auto.Enter

DTV-Signal

In DTV mode, you can tune manually and adjust the angle, orientation of the antenna etc

Enter Menu

Enter Menu

Reset

16

Auto Ch Search

Press ▲ / ▼ key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press key to enter
your selection and scan. After the scan is finished, the following menu will display. The channels found are automatically
saved as below:

Enter

Analog Channels Found

Autoprogram Menu

NTSC Channel 19

Digital Channels Found

Not Found

Progress(%) 12

2

0

Add On Ch Search

When the channels are found, use / to add it to the channel list.

ManualChSet

Press Enter button to display a channel list that you can select channel as below:

To M ov e To Change To Exit

Manual Channel Set Menu

Ch 42 -1 ATSCdmo Viewable

Ch 2 -0 Viewable

Ch 11 -0 Viewable

Ch 22 -0 Viewable

Ch 31 -0 Viewable

Ch 52 -0 Viewable

Ch 54 -0 Viewable

Ch 66 -0 Viewable

Ch 68 -0 Viewable

Channel labels

Allows you to name the channel that is selected. Use ◄ / ► to move the cursor and use ▲/▼ to input the name and then
press Menu or Enter to return or exit as following:

Channel Labels Menu

To Move To Change To Exit

Ch 42-1 ATSC dmo

Manual Language

To select language of the OSD such as English/ French and Spain.

Enter Menu

Menu

17

To S to p

Menu

Feature menu options

Press MENU on the front panel or on the remote control and then use / to select the Feature menu.

3. When you are satisfied with your adjustment, press
to exit the main menu.MENU

2. Press and button to adjust.

1. Use / to select what you want to adjust in the

menu.Feature

Time Set

Press / button and then use Enter the time set menu as below that allows you to set the time the TV will display.

To M ov e To Change To Exit

Time Zone

Time Set Menu

Time Set Mode

Year

Date

Time

Auto

Pacific

Dec 29

12:00 AM

2006

Time Set Mode

You can select one of auto and manual to set the time.
When selected auto, the item of year/date and time will be
disabled and can not to adjust. When select the manual
mode, you can press ◄/► and ▲/▼ to set the corresponding
functions.

Time Zone

Press ◄/► to select the time zone such as Pacific/ Alaska/
Hawaii/ Eastern/ Central/Mountain.

Sleep Timer

Press ◄/► to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min
/60min/90min and OFF.

Advance Video Menu

Advance Video Menu

Press Enter to enter the advance video menu as below:

To Move

To Change

To Exit

Noise Reduction-- Speckle

Advance Video Menu

Noise Reduction--Spatial

Noise Reduction-- Temporal

Color Temperature

3D Y/C

Adaptive Contrast

Setting

Off

Off

Normal

On

Off

Preset

On

Enter Menu

Menu

18

Audio

Setup

Feature

To Move To Select To Exit

Time Set

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

Picture

Off

Enter Menu

ATS C C C

Digital Closed Caption

CC1

C1

S

- Noise Reduction--Spatial: press Enter to select on or off.

- Noise Reduction--Speckle: press Enter to select on or off.

- Noise Reduction--Temporal: press Enter to select on or off.

- Auto Contrast Enhancement: press Enter to select on or off.

- Color Temperature: press Enter to select one of Normal/Cool

and Warm.

- 3D Y/C: press Enter to select on or off.

- Adaptive Contrast: press Enter to select on or off.

- Setting: press Enter to return to the factory setting.

Password Set

Press Enter to enter the Enter Old Password menu, and then input the number of 0-9 as below, and you can change the

password when you input the new one twice. The initial password is"0000".

Enter Old Password

*

Parental Control

Press Enter to enter the sub-menu and then uses the 0-9 to enter the correct password. The initial password is"0000".

Digital Closed Captions

This item allows you to set the closed caption, and press Enter to enter Closed Caption Options menu as below:

ToMove To Change To Exit

Size

Digital Closed Caption

Style

Font

Text C ol or

Automatic

Automatic

Text Opacity
Background Color
Background Opacity
Edge Effect

Edge Color

Automatic

Automatic

Automatic

Automatic

Automatic

Automatic

Automatic

DECIDED BYBROADCASTING

ToMove To Select To Exit

Candlan Rating Menu

Candlan English Candlan French

E

C

C8+

G

PG

14+

18+

E

G

8ans+

13 ans+

16 ans+

18 ans+

Enter Menu

Menu

19

- Style: press Enter to select one ofAutomatic and Custom, when you select automatic, the others are disable and can not be

adjusted.

- Size: press to select one of Normal/Large and Small.

- Font: press to select one of Default and from Font1 to Font7.

- Text Color: press to select one of Red/Green/Blue/Yellow/Magenta/Cyan/Black and White.

- Text Opacity: press to select one of the Solid/Flashing/Transparent/Translucent.

- Background Color: press to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.

- Background Opacity: press to select one of the Solid/Flashing/Transparent/Translucent.

- Edge Effect press to select one of the None/Raised/Depressed/Uniform/Left Shadow/Right Shadow.

- Edge Color press to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.

Enter

Enter

Enter

Enter

Enter

Enter

Enter

Enter

VGA menu options

Press MENU on the front panel or on the remote control and then use / to select the Feature menu in VGA mode.

Audio

Setup

Feature

To Move To S el ec t To E xi t

Time Set

Sleep Timer

Advanced Video Menu

Picture

Off

VGA Set

3. When you are satisfied with your adjustment, press
to exit the main menu.MENU

2. Press and button to adjust.

1. Use / to select what you want to adjust in the

menu.Feature

VGA Set

Press / button and then use Enter to enter the VGA set menu as below:

To Move To Select To Exit

V-Pos

VGA Setting-1024x768@70Hz

H-Pos

Clock

Phase

Auto Adjust

50
50

50

50

Setting

Preset

Phase

Press / button and then use / to adjust the phase of the picture.

Clock

Press / button and then use / to adjust the clock of the picture.

V-Pos

Press / button and then use / adjust the vertical position of the picture.

H-Pos

Press / button and then use / adjust the horizontal position of the picture.

Enter Menu

Enter Menu

20

-Phase This function allows you to remove any horizontal
noise and clear or sharpen the image of characters

-Clock This function is to minimize any vertical bars or stripes

visible on the screen background. And the horizontal
screen size also will change.

-Position This function is to adjust the picture to Left/Right

and Up/Down as you prefer..

Auto Adjust

Press / button and then use / to do auto adjust that automatically adjusts the available options for the best viewing
configuration.

Setting

Press Enter to do preset that can return to the factory setting.

Component menu options

Press MENU on the front panel or on the remote control and then use / to select the Feature menu in YPbPr mode.

Audio

Setup

Feature

To Move To S el ec t To E xi t

Time Set

Sleep Timer

Advanced Video Menu

Picture

Off

Component Set

3. When you are satisfied with your adjustment, press
to exit the main menu.MENU

2. Press and button to adjust.

1. Use / to select what you want to adjust in the

menu.Feature

Component Set

Press / button and then use Enter to enter the VGA set menu as below:

To Move To Select To Exit

V-Pos

Component Setting-720x480I@30/29.97Hz

H-Pos

Clock

Phase

Auto Adjust

50
50

50

50

Setting

Preset

HDMI and S-VIDEO menu options

Press MENU on the front panel or on the remote control and then use / to select the Feature menu in HDMI or S-VIDEO
mode.

Enter Menu

Enter Menu

21

Audio

Setup

Feature

To Move To Select To Exit

Time Set

Sleep Timer

Advanced Video Menu

Picture

Off

Time Set

Press / button and then use Enter the time set menu as below that allows you to set the time the TV will display.

Sleep Timer

Press ◄/► to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min
/60min/90min and OFF.

Advance Video Menu

Press Enter to enter the advance video menu.

To Move To Change To Exit

Menu

On

Advanced Video Menu
Noise Reduction --Spatial

Noise Reduction --Speckle
Noise Reduction --Temporal
Color Temperature

3D Y/C

Normal

On

On

On

Enter Menu

22

Off

Blue screen

7. TROUBLESHOOTING AND ADVICE

Before calling our SAS centre, please check if you can solve the troubleshooting by yourself.

Control

Troubleshooting

No signal

No color shades

Stain show on the

screen.

Double or multiple

display image

Snow on the screen

The remote control

does not work

"Zip" made noise on

TV cover

No sound

Please check that all cables and cord's are correctly plugged in.

Adjust the contrast, the color and the brightness

May be result from a lighting signal from car, motor, neon light and
other electrical devices or appliances.

May be the result of an electrical wave disturb from other TV,
Computer and Game machine or Radio

The cables of the antenna are not correctly plugged in.

Please check the batteries order and alignment.Check that the IR
of the remote control is not hidden by something.

Even if the display image is correct, the noise may come from an

unsteady fixation of the panel.

Make sure that you have not press the MUTE button of the panel
or of the remote control.

23

8. SPECIFICATIONS

Screen Size

Display Type

Resolution(Pixel)

Aspect Ratio

DC INPUT

TV System

Video Input Format

Antenna Input

Audio Output

Input

Audio

(Videos-Video-PC)

TFT LCD

NTSC

PAL/NTSC

L/R W2X3

This manual is only for your reference, any change to the design and specification will not
be advised.

Standard antenna socket 75Ω

15.6Inch

1280 X 800

16:10

Weight

Dimensions (with stand)

17.6 Wx16.1 Hx7.3 D"""

DC12V 35W

9 3lbs

.

HDMI

Standards TMDS Max. 1080i

S-Video

Y:1.0Vp-p±3db C:0.3Vp-p±3db

640 480/60Hz 800 600/60Hz 1024 768/60HzXX X

R/L 200mVrms (max3.0vp-p) 20K RCAΩ

Audio (AV/S-Video/PC)

PC

24