Pyle PLA-3000-D Owners manual
www.pyleaudio.com
amplifiers
Brooklyn, NY 11204
1600 63rd Street
Pyle Service Center
R.A.#
damage.
improperly serviced, or subject to misuse, neglect, or accidental
This warranty will be considered void if the unit was tampered with,
replacement of the defective unit when it is returned to us prepaid.
Our obligation under this warranty is limited to the repair or
expiration date.
handling, and insurance, or provide your Visa/MC number with
• also include a check or money order for $18.00 for return shipping,
and R.A. number
• include in your letter your return address, daytime phone number,
• A brief letter indicating the problem you are experiencing
• A copy of your sales receipt or other proof of purchase
You must also include the following items:
and shipped prepaid to:
When returning a product to us for warranty service it must be carefully packed
relating to your return.
R.A.# must appear on the outside of your package and on all paperwork
number at (718) 236-6948 to obtain a Return Authorization number. This
To obtain warranty service you must first call our Consumer Return Hotline
your unit will be repaired or replaced at the sole discretion of Pyle.
Should the product fail due to factory defects in material or workmanship,
warranty is limited to the original retail purchase.
in material and workmanship for two (2) years from the date of purchase. This
shipment. Products purchased in the USA are warranted to be free of defects
All Pyle products are carefully constructed and thoroughly tested before
limited warranty policy
user’s manual
PLA3000D
Class-D mono block car audio amplifier
INTRODUCTION...
Thank you for purchasing the Pyle Red Elite Class-D amplifier.
Rest assured you have purchased a quality product designed
and engineered to give you many years of uncompromised
musical service.The Pyle Class-D amplifier has been designed
using the latest in electronic technology available today.
This mono subwoofer amplifier is the result of advanced high
speed switching technology that overcomes the less-efficient
Class-D design. the Pyle Red Elite Class-D amplifier reflects
your true appreciation for powerful bass reproduction in the
mobile environment.
This amplifier is designed for low-frequency information only and
it is not capable of reproducing any mid/high-frequency information.
This is due to the noise introduced into the signal by the switching
speed of the power supply, which must be filtered out of the audio
signal.
The power supply incorporated into Pyle Red Elite amplifier is a
DC to DC switching power supply designed to have adequate
headroom for even the most demanding peak and dynamic
range found on today's CDs and recording.
table of contents
general features
features and specifications
PLA3000D
system wiring
PLA3000D
amplifier and installation
protection circuitry and troubleshooting
2
3-4
5-6
7
8
Loading...