PVI Industries TURBOPOWER 250 N 400A-TPL Specification

LOW NOx TURBOPOWER® • PACKAGED WATER HEATER

NICKELSHIELD® NICKEL-PLATED STORAGE TANK

TANK SERIES 400 GALLONS VERTICAL

MODEL

NUMBER

250 N 400A-TPL 250 200 199,000 4.5 2TPL 199 MBtu/h 28 4 1/2 16 1/3 8 1722
375 N 400A-TPL 375 300 300,000 4.5 3TPL 299 MBtu/h 28 4 3/4 16 1/3 8 1730
500 N 400A-TPL 500 400 399,000 4.5 4TPL 399 MBtu/h 28 5 3/4 16 1/3 8 1740

c Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.
d “J” dimension is for the burner housing only – gas train may exceed this dimension.
e Standard gas train.

* The information presented is for natural gas 0.6 S.G.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form #PV6540.

Recovery gph

40° - 120°F 40° - 140°F

c

INPUT

Btu/h

Min. Inlet

Flow Gas

Pressure
" W.C. e

SCAQMD Energy

Model No.

Dimensions (inches)

A B C J d HP Amps

Blower

Motor

Shipping

Weight

lbs

STANDARD GAS PRESSURE REQUIREMENTS:

SEE TABLE FOR MINIMUM PRESSURE BY MODEL NUMBER.

MAXIMUM STATIC INLET GAS PRESSURE IS 14" W.C.

FOR GAS PRESSURES OUTSIDE OF THIS RANGE,

CONTACT YOUR PVI REPRESENTATIVE.

VENTING REQUIREMENTS:

-.02" TO -.06" W.C. (NEGATIVE PRESSURE).
TYPE B VENTING.

ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED UPON

THE VENT CONNECTION DIAMETER EXCLUSIVELY. CHECK

NATIONAL FUEL GAS CODE UNDER "FAN ASSISTED."

PV 6547 02/25/04 [phone] • www.pvi.com

STANDARD ELECTRICAL REQUIREMENTS:

CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS.
MOTOR VOLTAGE: 1/3 HP ARE 120V, 1Ø, 60 HZ.

208V, 230V AND 460V MOTORS ARE AVAILABLE BUT WILL
REQUIRE A SEPARATE 120V/2 amps CONTROL CIRCUIT OR AN
OPTIONAL CONTROL CIRCUIT TRANSFORMER.

PVI RESERVES THE RIGHT TO CHANGE THE DESIGN AND

SPECIFICATION WITHOUT NOTICE.

Product is patented in the U.S., Canada, and Mexico.

PVI INDUSTRIES, LLC

FORT WORTH, TEXAS 76111