PVI Industries TURBOPOWER 1000 N 225A-TPO Specification Sheet
TURBOPOWER® OIL PACKAGED WATER HEATER
NICKELSHIELD
Model
Number
250 N 225A-TPO 250 200 199,000 1.4 28 4 17 1/3
500 N 225A-TPO 500 400 399,000 2.8 28 5 17 1/2
750 N 225A-TPO 750 600 600,000 4.3 42 6 17 1/2
1000 N 225A-TPO 1000 800 800,000 5.7 42 8 17 1/2
Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.
"J" dimension is for the burner housing only.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form PV 6004.
Recovery gph
40°- 120°F 40°- 140°F A B J HP Volt/Ph/Amps
®
NICKEL-PLATED STORAGE TANK
TANK SERIES 225 GALLONS
Dimensions
Input
Btu/h
Gph
#2 Oil
(inches)
Blower
Motor
115/1∅/8
115/1∅/10
115/1∅/10
115/1∅/10
Shipping
Weight
lbs
1380
1400
1480
1520
VENTING REQUIREMENTS
-.02" TO -.06" W.C. (NEGATIVE PRESSURE)
ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED
UPON THE VENT CONNECTION DIAMETER EXCLUSIVELY.
FOR PROPER SIZING, CONSULT VENTING SUPPLIER.
PV 5359 04/05
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
(800) 784-8326
STANDARD ELECTRICAL REQUIREMENTS
CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS.
MOTOR VOLTAGE:
208V, 230V, AND 460V MOTORS ARE AVAILABLE BUT WILL
REQUIRE A SEPARATE 120V/2 amps CONTROL CIRCUIT OR
AN OPTIONAL CONTROL CIRCUIT TRANSFORMER.
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN
(817) 335-9531 www.pvi.com
AND SPECIFICATION WITHOUT NOTICE.
Product is patented in the U.S., Canada, and Mexico.
Loading...