PVI Industries PV 6382 11, PV 6382 07 User Manual

LOW NOx MAXIM ▪ PACKAGED GAS WATER HEATER

®

NICKELSHIELD

STANDARD FEATURES AND EQUIPMENT

• 82% thermal efficiency

• SCAQMD compliant

• NOx emissions certified at <55 ppm at 3% 0

• NOx emissions certified at <30 ppm at 3% 0

• NICKELSHIELD

• Nonferrous, removable fittings at all tank connections

• Nickel-plated, copper-clad steel firetubes

• SCALEGUARD

• Upper and lower immersion operating thermostats

• Immersion temperature limiting device (high limit control)

• ASME-rated temperature and pressure relief valve

• Drain valve

• Handhole tank cleanout

• Power combustion burner

• Spark ignition

• Electronic combustion sequencer and flame safeguard with pre-purge

• Combustion sequence indicating lights (> 399,000 Btu/h)

• Differential pressure air flow switch

• Second main gas valve (> 399,000 Btu/h)

• Compliant with ASHRAE 90.1 for thermal efficiency and standby loss

• Fiberglass insulated tank

• Draft regulator (barometric damper)

• Steel jacket panels with industrial-grade finish

• Factory-authorized start up

• ASME stamped—150 psi MAWP

• National Board Registered for 150 psi working pressure

• UL listed to safety standard UL 795 “Commercial-Industrial Gas Heating Equipment”

• FM compliant

®

nickel-plated tank with 10-year warranty, three-year scale failure warranty and one-year cost-free service policy 

®

tubesheet protection

NICKEL-PLATED STORAGE TANK

and/or less than 40 nanograms per joule (199 to 399 MBtu/h)

2

(above 399 MBtu/h)

2

OPTIONAL FEATURES AND EQUIPMENT

 Long-life service policy 
 AGA-rated temperature and pressure relief valve(s)
 2,500,000 Btu/h FM controls package. Adds electronic low-water cutoff, manual-reset high limit, single-try firing control and high-low

gas pressure switch. (not required for FM compliance below 2,500,000 Btu/h) (available only on 540,000 and 650,000 Btu/h)

 CSD-1 / IRI compliant components include manual reset electronic low water cut off, manual reset temperature limiting device and

Hi-Lo gas pressure switch (as required)

 Electronic combustion sequencer and flame safeguard with pre– and post-purge
 Electronic low-water cutoff
 Manual-reset, temperature limiting device
 DUO-SET™ controls for dual-temperature applications
 Dial temperature and pressure gauges
 Tridicator
 Alarm bell with silencing switch
 Seven-day time clock
 Digital seven-day time clock with battery backup
 Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others)

Consult factory for other codes

 See complete warranty and/or service policy for details

PV 6382 11/07

PVI INDUSTRIES, LLC

FORT WORTH, TEXAS 76111

[phone] ▪ [phone] ▪ www.pvi.com

PVI reserves the right to change

the design and specification

without notice.