PVI Industries PV 5369 User Manual
ATMOSPHERIC GAS • PACKAGED WATER HEATER
NICKELSHIELD® - NICKEL-PLATED STORAGE TANK
TANK SERIES 125 GALLONS
Recovery gph c Dimensions
Model Number
40° - 120°F 40° - 140°F
14 N 125A-G 168 134 140,000 4.5 5 3/4 86 980
20 N 125A-G 239 191 199,000 4.5 6 3/4 86 1030
27 N 125A-G 324 259 270,000 4.5 7 3/4 86 1090
40 N 125A-G 479 383 399,000 4.5 8 3/4 87 1170
54 N 125A-G 648 518 540,000 6.5 10 1 87 1330
72 N 125A-G 864 691 720,000 6.5 12 1 87 1430
80 N 125A-G 960 768 800,000 7.0 12 1 1/4 87 1490
c Recoveries based on 80% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.
* The information presented is for natural gas 0.6 S.G. – For operation with propane (LP gas), consult the factory.
* For operation outside this range, consult the factory.
Dimensions are in inches unless otherwise notes.
For standard and optional equipment, see form #PV 6070.
Input
Btu/h
* Min. Inlet Flow
Gas Pressure
"W.C.
(inches)
B C E
Shipping
Weight
lbs
STANDARD GAS PRESSURE REQUIREMENTS:
SEE TABLE FOR MINIMUM PRESSURE BY MODEL NUMBER.
MAXIMUM STATIC INLET GAS PRESSURE: 14 W.C.
FOR GAS PRESSURES OUTSIDE OF THIS RANGE,
CONTACT YOUR PVI REPRESENTATIVE.
ELECTRICAL REQUIREMENTS:
CONTROL VOLTAGE: 115V, 1Ø, 60 HZ., 2 AMPS
ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED
UPON THE VENT CONNECTION DIAMETER EXCLUSIVELY.
CHECK NATIONAL FUEL GAS CODE UNDER "ATMOSPHERIC."
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN AND
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
PV 5369 07/04 (800) 784-8326 • www.pvi.com
VENTING REQUIREMENTS:
TYPE B VENTING.
SPECIFICATION WITHOUT NOTICE.
Product is patented in the U.S., Canada, and Mexico.
Loading...