PVI Industries PLATINUM 199 SS A-PN, PLATINUM 299 SS A-PN, PLATINUM 399 SS A-PN Specification Sheet

PLATINUM

®

• CONDENSING GAS WATER HEATER

STAINLESS STEEL TANK

TANK SERIES 70 GALLONS

MODEL NUMBER X 199 SS A-PN 299 SS A-PN 399 SS A-PN

Input Btu/h 199,000 299,000 399,000
GPH Recovery Rate at 40°F to 140°F 221 340 444
Storage Capacity - gallons 80 70 70

1st Hour Delivery (100°F ΔT) - gallons 289 397 501

Hot Outlet and Cold Inlet - NPT 2 2 2
Flue Connection Diameter - inches 3 * 4 4
Approximate Shipping Weight - lbs 1000 1100 1100

Dimensions are in inches unless otherwise noted.
For standard and optional equipment, see form # PV 6811.
* When connected with field provided 3” x 4” adapter of the same material as required for venting (see I&M).

STANDARD GAS PRESSURE REQUIREMENTS

MINIMUM FLOW GAS PRESSURE: 4.5" W.C.

MAXIMUM STATIC GAS PRESSURE: 10.5" W.C.

FOR GAS PRESSURES OUTSIDE OF THIS RANGE,

CONTACT YOUR PVI REPRESENTATIVE.

STANDARD ELECTRICAL REQUIREMENTS

120V, 1Ø, 60 HZ.

MAXIMUM AMP DRAW (TRIAL FOR IGNITION): 6

CONTINUOUS AMP DRAW WHEN FIRING: 1.3

CONTINUOUS AMP DRAW DURING STANDBY: 0.03

This product is protected by patents in
the U.S., Canada and Mexico.

PV 6812 09/08

CATEGORY IV - POSITIVE PRESSURE, CONDENSING.

UL CLASSIFIED FOR SCHEDULE 40, SOLID-WALL PVC OR CPVC PIPE.

“SANI” TEMPERATURE HEATER REQUIRES CPVC VENT PIPE

SEE INSTALLATION MANUAL FOR VENTING

AND DIRECT COMBUSTION AIR GUIDELINES.

PVI RESERVES THE RIGHT TO CHANGE THE DESIGN

PVI INDUSTRIES, LLC

FORT WORTH, TEXAS 76111

[phone] y www.pvi.com

VENTING REQUIREMENTS

AND SPECIFIC ATION WITHOUT NOTICE.