Puretec Tripla, Tripla T2, Tripla T1, Tripla T3, Tripla T4 User Manual

...

Download

Page 1

User Guide

CERT N O. 23033

AS/NZ S 3718:2005

Tripla™

Puretec Tripla™ | Triple Action Tapware

For correct operation & installation it is essential to observe these instructions.NOV 2019

Page 2

What's inside

Operation ...................................................................................................................................... 2

Servicing........................................................................................................................................ 3

Technical Information

Recommended Working Pressures

Installation Guide

Assembly

Water Connection Patterns

Battery Installation

Replacement of Ceramic Disc Cartridge(s)

Tripla T1 Parts Description

Tripla T2 Parts Description

Tripla T3 Parts Description

Tripla T4 Parts Description

Tripla T5 Parts Description

Tripla T6 Parts Description

Warranty

...................................................................................................................................... 5

..........................................................................................................................................14

............................................................................................................ 3

................................................................................. 3

..................................................................................................................... 4

......................................................................................................6

.......................................................................................................................7

................................................................ 7

.................................................................................................. 8

.................................................................................................. 9

............................................................................................... 10

............................................................................................... 11

............................................................................................... 12

............................................................................................... 13

What's Inside

Puretec Customer Service

Thank you for purchasing a Puretec Tripla. Your tap is manufactured from only quality materials and will last for years, if maintained and installed properly.

The system is designed for metropolitan supply water but can be used in other situations. For other types of water supply please contact your local Puretec stockist or call our Puretec Customer Service Helpline prior to installing the tap.

Customer Service Helpline 1300 140 140 (Australia) 0800 130 140 (New Zealand)

This product contains a button battery. Accidental ingestion may occur and can be fatal. Please keep out of reach from infants. If you suspect an accidental ingestion please contact emergency services.

Page 3

Introduction

Operation

Chrome Plated Surface - should only be cleaned with liquid detergent or soap and water.

Under no circumstance should any abrasive or acid base cleaning agents be used.

Servicing

Periodically clean the aerator for any lodged sediment that may restrict ow. A Puretec water lter is highly recommended for product longevity.

Should it be necessary to have your mixer serviced while under warranty, please carry out the following procedure:

1. Firstly call the plumber, preferably the one that has installed it, (most problems are caused by the supply lines not being cleaned out properly, prior to connecting the mixers).

2. Make sure that the plumber has installed your mixer according to the Instruction Guide.

3. If the plumber is satised that he cannot rectify the problem then contact your

plumbing supply store or your local Puretec stockist.

Important: We do not recommend the dismantling of any internal part of the mixer purely to see what is inside as this will breach your warranty.

Technical Information

Puretec mixers can be used in conjunction with:

• Pressure storage hot water system

• Any mains water pressure not exceeding 500 kPa

• Maximum hot water temperature of 60°C

• Instantaneous hot water system

Recommended Working Pressures

• Minimum working pressure 50 kPa (7.5 PSI)

• Maximum working pressure 500 kPa

It should be noted that water mains pressure builds up during o peak periods, mainly

at night, sometimes doubling or trebling normal daytime pressures.

Note: Not suitable for unequal pressure. On high pressure areas where the pressure exceeds the recommended working pressure as indicated above pressure limiting valves must be installed or warranty is voided.

Page 4

Installation Guide

Mixer Tap

Rubber Washer

Sink Faucet

Hole (Ø33mm)

Rubber Washer

Metal Washer

COLD

HOT

Retainer Screw

Water Filter

Metal Pipe

Locking Nut

Note: It is important to ush out the supply pipes to the mixer before connecting the exible hoses, with the initial installation, so

no foreign matter can enter into the cartridges.

A Puretec Water Filter is highly recommended for product longevity.

Page 5

Assembly

Step 1. Connect the hoses to the faucet and tighten them.

Only use hand to screw the exible

hose. Do not over tight. Don't use any tools.

Step 2. Put Brass Base with O-Ring to the bottom of the faucet.

Step 3. Put the hoses through the Basin or Sink. Required through hole size is Ø33mm.

Basin or Sink

33mm dia.

Hole

Brass Base

O-Ring

Step 4. Place the Retainer Screw through the hole in each Spacer and screw to the hole on the bottom of the faucet.

Then, use a wrench to lock the Retainer Nut.

Rubber Spacer

Zinc Spacer

Retainer Screw

Retaining

Nut

Page 6

Water Connection Patterns

Connections

For TRIPLA T1 & T2

For TRIPLA T3 to T6

Water Filter

Connection

Water Filter

Connection

Retainer

Screw

COLD Water Connection

Retainer Screw

HOT Water Connection

COLD Water Connection

Retainer

Screw

HOT Water Connection

Page 7

Maintenance

Battery Installation - LED reminder light

Important note: Battery must be replaced when changing cartridges. WARNING! This

product contains a battery. Accidental ingestion may occur and can be fatal. Please keep out of reach from infants. If you suspect an accidental ingestion please contact emergency services.

1. Remove the black battery seat from the faucet canopy.

Note: Red light ashes

twice and then followed by the blue light.

3. Reinstall battery seat assembly into the faucet canopy.

2. Install battery into the battery seat, positive side up.

Positive side up.

Negative on the PCB.

4. Blue light ashes during

normal operation.

5. Red light ashes indicates your cartridges

are due to be changed (usage has exceeded 3,000 minutes or 12 months).

Please change the battery when

changing the lter cartridge(s).

Replacement of Ceramic Disc Cartridge(s)

1. Hot/Cold Outlet

• Remove hot and cold water indicator then release screw in lever and li lever o,

now you can unscrew dome cap and loosen the cartridge lock nut.

• Li out old cartridge and clean inside making sure no old O-rings are still stuck

inside cartridge housing.

• Insert new cartridge making sure O-rings on bottom of new cartridge have not

fallen o and lugs in bottom of cartridge line up with holes in cartridge housing.

• Now you can tighten lock nut with a torque wrench to 14 newton meters, then reinstall dome cap, lever screw and hot and cold water indicator.

2. Filtered/Rain Ancillary Outlet

• Remove front button cover using ne-edged 1.2mm screwdriver.

• Unscrew handle then remove cartridge by unscrewing it anti-clockwise, using 5/8” socket. Install cartridge by completing removal instructions as above, in reverse order.

• Ensure cartridge is rmly tightened not over tightened.

Page 8

TRIPLA T1 Parts Description

1. Handle

2. Screw

3. Screw

4. Cap

Parts Description

5. Handle

6. Cap

7. Plunger

28. Washer

29. Aerator Insert

30. Aerator Cap

38. Handle Cap

41. Battery Seat

11-4 Connector

39. Display

11-3 Inner Tube

31. EPDM washer

32. Aerator Insert

33. Aerator Cap

34. Regular Seat

35. Screw

36. Magnetic Seat

37. Magnet

40. Circuit Board

11-2 Tube

11-1 Body

8. Stem / Cartridge

9. Cover Stem

10. Teflon Washer

11. Spout

12. EPDM Washer

13. EPDM Washer

12. EPDM Washer

10. Teflon Washer

14. Body Stem

15-1 Body

15-2 Nut

16. Rubber Washer

17. Housing

18. Screw

19. Rubber Washer

20. Stainless Washer

21. Brass Nut

45. Flexible Tube ½" Inlet/Outlet Hose

Page 9

TRIPLA T2 Parts Description

1. Screw

Parts Description

3. Handle

25. EPDM Washer

26. Aerator Insert

27. Aerator Cap

39.

Handle

Cap

36. Display

37.

Screw

9-4. Connector

32. Screw

35.

Handle

Cap

34. Strong Magnet

40. Circuit Board

9-3. Inner Tube

28. EPDM Washer

29. Aerator Insert

30. Aerator Cap

33. Magnet Seat

2. Cap

9-2. Brass Tube

9-1. Body

31. Plunger

4. Cap

5. Plunger

6. Stem / Cartridge

7. Cover Stem

8. Teflon Washer

9. Spout

10. EPDM Washer

11. EPDM Washer

10. EPDM Washer

8. Teflon Washer

12. Body Stem

13-1. Body Stem

13-2. Body Stem

14. EPDM washer

38. O-Ring

44. Flexible Tube ½"

41. Battery Seat

44. Flexible Tube ½"

17. Stainless Washer

18. Brass Nut

15. Screw

16. Rubber Washer

42. Flexible Tube ½"

Page 10

TRIPLA T3 Parts Description

Parts Description

1. Washer

2. Aerator Insert

3. Aerator Cap

5. Aerator Insert

38. Housing

39. O-Ring

23-4 Connector

4. Washer

6. Aerator Cap

10. Handle Cap

9. Display

15. Circuit Board

14. Battery Seat

23-3 Inner Tube

23-2 Tube

23-1 Body

7. Handle

8. Screw

11. Screw

12. Strong Magnet

13. Magnet Seat

40. Screw

41.

Washer

44. Flexible Tube

23. spout

24. Cap

25. Washer

26. O-Ring

27. O-Ring

28. Body

29. O-Ring

35. Body

36. Nut

37. Stopper

30. Connector

30-2. Cartridge

33. Handle

31. Plunger

32. Cap

8. Screw

34. Canopy

42. Washer

43. Brass Nut

47. Wrench

Page 11

TRIPLA T4 Parts Description

16. Screw

10. Cap

11. O-Ring

12. Screw

17. Circuit Board

13. Display

14. Handle Cap

15. Washer

20. Magnet Seat

19. Strong Magnet

18. Battery Seat

21. Plunger

22. Turn Stem Body

23. Stem Post

24. Upper

25. Lower

26. Seat

27. Stopper

26. Seat

1-2. Tube

1-1. Body

5. Gasket

6. Washer

7. O-Ring

8. O-Ring 9-1. Washer 9-2. Gasket 9-3. Gasket

28. Screw

29. Body

30. O-Ring

38-1. Body

38-2. Nut

39. Stopper

40. Washer

41. Screw

Parts Description

1. Spout 1-3. Inner Tube

1-4. Connector

2. Washer

3. Aerator Insert

4. Aerator Cap

35. Handle

31. Connector

32. Stem

33. Plunger

34. Cap

36. Screw

37. Handle Cap

42.

Washer

44. Brass Nut

45. Flexible Tube

43. Washer

Page 12

TRIPLA T5 Parts Description

Parts Description

1. Spout

1-3. Inner Tube

11. O-Ring

12. Screw

17. Circuit Board

10. Cap

18. Battery Seat

22. Turn Stem Body

23. Stem Post

13. Display

21. Plunger

24. Upper

25. Lower

26. Seat

27. Stopper

26. Seat

16. Screw

14. Handle Cap

15. Washer

20. Magnet Seat

19. Strong Magnet

1-2. Tube

1-1. Body

5. Gasket

6. Washer

7. O-Ring

8. O-Ring 9-1. Washer 9-2. Gasket 9-3. Gasket

28. Screw

29. Body

30. O-Ring

38-1. Body

38-2. Nut

39. Stopper

40. Washer

41. Screw

1-4. Connector

2. Washer

3. Aerator Insert

4. Aerator Cap

35. Handle

31. Connector

32. Stem

33. Plunger

34. Cap

36. Screw

37. Handle Cap

42.

Washer

44. Brass Nut

45. Flexible Tube

43. Washer

Page 13

TRIPLA T6 Parts Description

1-4. Connector

2. Washer

3. Aerator Insert

4. Aerator Cap

5. Washer

6. Filter Net

7. Filter

8. Aerator Cap

Parts Description

1. Spout 1-3. Inner Tube

1-2. Tube

14. O-ring

15. Screw

20. Circuit board

13. Cap

21. Battery Seat

25. Turn Stem Body

26. Stem Post

16. Display

24. Plunger

27. Upper

28. Lower

29. Seat

30. Stopper

29. Seat

19. Screw

17. Handle cap

18. Washer

23. Magnet seat

22. Strong magnet

1-1. Body

9. Gasket

10. Washer

11. O-Ring

12. O-Ring

31. Screw

32. Body

33. O-Ring

41. Body

41-1. Nut

42. Stopper

43. Washer

44. Screw

45.

Washer

38. Handle

34. Connector

35. Stem

36. Plunger

37. Cap

39. Screw

40. Handle Cap

48. Flexible Tube

46. Washer

47. Brass Nut

Page 14

Notes

The complete range of Puretec products are developed, rened and made to meet and exceed stringent specications for the worldwide market.

Important Note: Sales of products are subject to our Terms & Conditions which are

available upon request. All specications, prices and photos are a guide only and are subject to change without notice. Please ring to conrm details. Do not use products with

microbiological unsafe water without adequate disinfection. Under normal circumstances a pressure limiting valve is not required. If incoming water pressure is excessive it may

however be necessary to install an approved pressure limiting valve. Maximum ow

depends on cartridge, vessel, pressure, impurities etc.

Installation Note: A water lter system/tap, like any product, has a limited life and may

eventually fail. Also sometimes failure happens early due to unforeseen circumstances. To avoid possible property damage, this product should be regularly examined for leakage and/or deterioration and replaced when necessary. A drain pan, plumbed to an

appropriate drain or outtted with a leak detector, should be used in those applications

where any leakage could cause property damage, and/or the water supply should be

turned o if no one is home/present.

Warranty

This warranty commences from the date of purchase. To make a claim under the warranty, take the product and proof of purchase to place where you purchased the product, and they will lodge a Warranty Request with Puretec. In addition to the

guaranties provided under the law, Puretec oer warranties as follows: 6 year warranty

is 1 year parts and labour, plus 5 years parts only.

Puretec will pay your reasonable, direct expenses of claiming under this warranty. You may submit details and proof of your expense claim to place of purchase for consideration.

The warranty only applies if the product was used and/or installed in accordance with the user guide and/or installation instructions. This warranty is given in lieu of all other express or implied warranties and manufacturer shall in no circumstance be held liable for damages consequential or otherwise or delays caused or faulty manufacturing except as excluded by law.

Applicable to all above, is that the warranties need to be approved by Puretec to ensure product was not incorrectly used, installed or claimed. False and incorrect claims will be pursued at Puretec’s discretion, including chargeable inspection and labour costs incurred.

Page 15

Warranty

Warranty/Australia

This warranty is given by Puretec Pty Ltd, ABN 44 164 806 688, 37-43 Brodie Road, Lonsdale SA 5160, telephone no. 1300 140 140 and email at sales@puretec.com.au.

This warranty is provided in addition to other rights and remedies you have under law: Our goods come with guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Warranty/New Zealand

This warranty is given by Puretec Ltd, Reg. No 4464398, PO Box 875 Cambridge 3450 NZ, telephone no. 0800 130 140 and email at sales@puretec.co.nz.

This warranty is provided in addition to other rights and remedies you have under law: Our goods come with guarantees which cannot be excluded under the Consumer Guarantees Act. You are entitled to replacement or refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

In order to register your warranty online you must do so within 30 days of your product purchase.

Follow these 3 simple steps:

1. Go to puretecgroup.com/warranty

2. Enter the required details and hit submit.

3. You will receive an email conrming your warranty.

Authorization code: 1874752

Terms and conditions apply. Proof of purchase must be retained.

Go to puretecgroup.com for full details.

Page 16

Puretec Tripla, Tripla T2, Tripla T1, Tripla T3, Tripla T4 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual