Puretec SPARQ-S4 Specifications Sheet

Product
SPARQ S4
GENERAL INFO DESIGNED FOR MAINS WATER
Sparkling, Chilled & Ambient Water on Tap
The SPARQ S4 gives you the luxury of ltered sparkling or still water, right in the heart of your home. A simple touch on the stylish LED panel will
give you ltered sparkling or still water, chilled to perfection. The SPARQ S4 is an object of prestige. With sleek lines, elegant styling and the luxury of
sparkling water on tap, it is the perfect nishing touch to your kitchen or entertaining area.
FILTRATION TECHNOLOGY
Using the latest carbon briquette technology, the ltration system will
purify the water in a multi-stage process. Puretec’s long life lters
usually only require changing once every 6 to 12 months. The quick-
twist cartridge can be easily replaced.
Carbonation system
Once the water has been puried, it can be delivered either sparkling or
still. If sparkling water is selected, the system injects CO2 gas into the
water stream as it is dispensed. This gives you chilled, fresh water with
just the right amount of sparkle. The CO2 canister is easy to replace,
and usually lasts between 9 to 12 months, depending on individual use.
A choice of sparkling, chilled & ltered water, straight from the tap
Soft touch buttons on the stylish LED panel
Compact under sink system
Longer lter life, your lter will usually last between 6 to 12
months
Filter cartridges are very easy to replace
Using the latest carbon briquette technology, the multi-stage
ltration system will purify the water in a multi-stage process
The SPARQ S4 includes a built in cooling system that chills the water for a refreshingly cold drink
Chilling the water
The SPARQ S4 includes a built in cooling system that chills the water
for a refreshingly cold drink. You can choose between ambient or chilled
when dispensing still water. The sparkling water is delivered chilled only.
For more information contact your local stockist or visit us at puretecgroup.com Australia 1300 140 140 | New Zealand 0800 130 140
AUGUST.2017
Page 1 of 2
FRONT VIEW SIDE VIEW
Product
SPARQ S4
SPARQ S4 Product Specication
Model SPARQ S4
Filtration 1 Micron Multi-stage
Cold Water Temperature 4°C to 10°C
Capacity 20 Litres per hour
Maximum Power Consumption Direct chill system 100W
Warranty 1 Year^
Weight 18 kg
^1 Year Platinum Protection applies to Puretec Systems when used in conjunction with a Puretec lter cartridge. Warranty is 1 Year parts and labour.
Installation Requirements
Water Connection 1/2”
Power requirements Standard 10amp power outlet (earth leakage protected)
Max. recommended inlet pressure 500 kPa
Required hole for the tap 33-35mm (max)
Ideal undersink dimension (w x d x h) 750 x 660 x 520mm
For more information contact your local stockist or visit us at puretecgroup.com Australia 1300 140 140 | New Zealand 0800 130 140
AUGUST.2017
Page 2 of 2
Loading...