Pulse MX102, MX1202 User Manual

1

USER MANUAL

MX102 & MX1202

WWW.PULSE-AUDIO.CO.UK

2

SAVE THESE SAFETY INSTRUCTIONS

Thank you for purchasing our product. To assure the optimum performance,
please read this manual carefully and keep it in a safe place for future refer­ence.

Explanation of Graphical Symbols

The lightning ash with arrowhead symbol, within an equilat­eral triangle, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclo­sure that may be of sufcient magnitude to constitute a risk of

electronic shock to persons.

The exclamation point within an equilateral triangle is in­tended to alert the user to the presence of important operat­ing and maintenance (servicing) instructions in the literature
accompanying the product.

Waste Electrical and Electronic Equipment or WEEE symbol.

When this product reaches the end of its life, do not dispose

with the household waste. This includes remote controls and
batteries. See www.recycle-more.co.uk. For more details of
how to dispose of PULSE products in an environmentally
sound fashion, or contact PULSE directly via www.pulse-

audio.co.uk.

CE marking is a declaration by the manufacturer that the

product meets all the appropriate provisions of the relevant
legislation implementing certain European Directives.

Please take care when working with any audio equipment. If
you are not fully aware how this unit works then it is best prac­tice to turn down all monitors and then turn them up slowly. If
you are unsure on how to use any equipment seek help from
a professional. Although your new console will not output any
sound until you feed it signals, it has the capability to produce

sounds which when monitored through an amplier or headphones may dam-

age your hearing permanently.

3

•This product has a 12 month warranty. This warrant will be voided if it ap­pears the product has been opened, modied or repaired by an unauthorized

technician

• Unplug the mixer from the wall outlet before cleaning Do not use liquid

cleaners or aerosol cleaner. Use a damp cloth for cleaning.

• Do not use this appliance near water for example, near a bathtub, wash­bowl, kitchen sink, in a damp room or near a swimming pool, etc.

• This appliance should never be placed near or over any heat source. This
appliance should not be place in a built-in installation, unless proper ventilation

is provided.

• This appliance should be operated only from the type of power source
indicated on the marking label. The following wiring convention is used in all
mains leads, and must be strictly observed: Green/Yellow = Earth, Brown =
Live, Blue = Neutral.

• Do not allow anything to rest on the power cord. Do not locate this appliance
where the cord will be damaged by people walking on it.

• Do not overload wall outlets or extension cords, as this can result in a re or

an electric shock.

• Follow all warnings and instructions marked on the appliance.

• Do not attempt to service this appliance yourself, as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all ser­vicing to qualied service personnel.

• Unplug this appliance from the wall outlet and refer servicing to qualied
service personnel under the following conditions:

A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into or onto the appliance.
C. If the appliance has been exposed to rain or water.
E. If the appliance has been dropped or the housing has been damaged.
F. When the appliance exhibits a distinct change in performance this indicates

a need for service.

• When replacement parts are required, be sure the service technician has
used replacement parts specied by the manufacturer that have the same
characteristics as the original part. Unauthorized substitutions may result in
re,electric shock, or other hazards. Upon completion of any service or repairs

to the appliance, ask the service technician to perform routine safety checks to
determine that the appliance is in safe operating condition.

• Never remove warning or information labels from the equipment