Pulse LEDBAR 24.1 User Manual

1

High Power LED RGB

Colour Wash Bar

Model: LEDBAR 24.1

www.pulse-light.co.uk

2

Safety Information

The lightning bolt within a
triangle is intended to alert
the user to the presence of
dangerous voltage levels
within the product’s
enclosure.

This voltage may be of
sufficient magnitude to
constitute an electric shock
risk.

To reduce the risk of electric

shock, do not remove cover of
this device. There are no user
serviceable parts inside. Refer
servicing only to qualified
service personnel.

The exclamation point within a

triangle is intended to alert the
user to important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.

Safety Precautions

• Read and retain these instructions

• Follow all instructions and heed warnings

• Do not use this device near water or in damp environments

• If the surface becomes dirty, clean only with dry cloth, do not use solvents or thinners

• Install in accordance with the manufacturer’s instructions

• Do not install near heat sources such as radiators, heat registers, stoves, or other devices that

produce heat

• Only use accessories specified by the manufacturer

• Refer all servicing to qualified personnel

• If mounting on a stand please ensure the stand has a sufficient load capacity to hold the unit. The

stand must be operated in accordance with the stand manufacturer’s instructions.

• Rigging of lighting products should only be carried out by a competent person in accordance with
current guidelines. All fixings used should be correctly rated taking care to observe 10:1 safety
factors and utilise “Secondary” fixings as backup to the primary fixing methods.

• This device must not be exposed to water in any way. No object filled with liquids should be placed
on apparatus

3

Pulse LEDBAR 24.1 – Colour LED Wash Bar

The Pulse LEDBAR 24.1 features 24 super bright, 1W LED’s offering greater output than the standard 252
LED products. Ideal for use indoors adding effects to stages, washing walls in colour or general up lighting.
The LED’s are split along the length of the bar in diagonal stripes to ensure a smooth wash across the wall
without any hotspots from any of the colours.

Features

• 24x 1W super bright LED’s (8 red, 8 green, 8 blue)

• 7 selectable DMX modes: 2, 3, 4, 6, 7, 14 and 26 channels

• Selectable operating modes including Auto, DMX, Master/Slave, Sound Active and Static Colour

• Black aluminium housing supplied complete with feet/hanging brackets

• 40 degree beam angle

• LED display with four button menu system for ease of setup

• IEC power in/out

• 3-pin XLR DMX connections

• Integral microphone for Sound Active mode

• Low power consumption: 36W

• Dimensions (WxHxD): 1025x65x65mm (not including brackets)

• Universal input voltage: AC120-240V/50-60Hz

Operation: