Page 1
Kauai III Rain Shower System
1011-BN, 1011-BG , 1011-CH, 1011- MB, 1011-OR B
PW-91011-1125BRN, PW-91011-1125GB, PW-91011-1125CP, PW-91011-1125BM, PW-91011-1125BRZ
PW-91011-1118BRN, PW-91011-1118GB, PW-91011-1118CP, PW-91011-1118BM, PW-91011-1118BRZ
Owner's Manual
Page 2
Parts Legend
6.38
in. -
162 mm
5 in. -
127mm
**When using optional 4 inch shorter pipe.
~26
1/8 in. - 664 mm [ ~22 1/8 in. - 562 mm**]
27
5/16 in. - 694 mm [ 23 5/16 in. - 592 mm**]
33
5/16 in. - 846 mm [ 29 5 /16 in. - 562 mm**]
33
5/16 in. - 846 mm [ 29 5 /16 in. - 562 mm**]
16
1/4 in. - 413 mm
20
in. - 508 mm
24
in. - 610 mm
36
1/4 in. - 920 mm [ 32 1/4 in . - 819 mm**]
9
in. - 228 mm
3.62 in. -
92 mm
Finish Wall Line
1. ½" x 2" NPT Nipple
2. Inlet Fitting
2.1 check valve/restrictor
3. Top Escutcheon
4. Top Tee
5. Shower Arm
6. Shower Head
7. Shower Pipe**
8. Soap Dish
9. Hand Shower Holder
*D
o e s n ot a pp ly o n m oDe l
1 07 7 **4”
10. Hand Shower
11. Stainless Steel Hose
12. Diverter Body
13. Bottom Escutcheon
14. Lower Mount Screw ..............(2)
15. Lower Mount (w/ 3MTape)
16. Wall Anchor ...........................(2)
17. Set Screw - 2.5mmX4mm
18. Swivel Joint
19. Check Valve
s ho rt er
sHOWER pIPE (7)
ava il abl e f or p ur ch as e at w ww.pu l s esh ow erspa s.co m
20. Set Screw - 2.5X5mm
21. Rubber Washer ............. (3)
22. Diverter Handle
23. 2.5mm Hex Wrench
24. PTFE Thread Sealant Tape
25. Set Screw - 2.5X8mm*
26. Shower Pipe Nut
27. Tapered Rubber Seal
28. Diverter Cartridge
29. Glue
2
Page 3
Installation Instructions
Thank you for choosing this Shower System by PULSE ShowerSpas!
Assembly and installation of the Shower System is designed
to be quick and easy. If you have installation questions or
performance problems, visit www.pulseshowerspas.com for
customer support
9. Slide top escutcheon (3) over top tee (4).
HINT—Lubricate escutcheon o-ring; a small amount of
soapy water will do the trick.
Please read instructions carefully, become familiar with all parts,
installation procedures and tools required. Follow steps in order
presented to help avoid mistakes.
FOR NEW CONSTRUCTION OR
COMPLETE REMODEL
•
A hot/cold mixing valve is required (NOT INCLUDED)
•
Nipple should extend 1⁄2" past nished wall surface.
TOOLS REQUIRED
Adjustable wrench, Phillips screwdriver, pencil, 2.5mm hex
wrench, 3mm hex wrench
ASSEMBLY
1. Determine length of brass NPT nipple (1) needed:
a. Place mark on existing shower arm at wall surface.
Unscrew shower arm from elbow in wall.
b. Measure distance from mark on shower arm to end of
shower arm threads. Add 1⁄2" to this measurement, and
then round to nearest 1⁄2".
Example 1: If measurement = 11⁄4", add 1⁄2" = 13⁄4",
rounded = 2" NPT nipple—this is the length needed.
Example 2: If measurement = 15⁄8", add 1⁄2" = 21⁄8",
rounded = 2" NPT nipple—this is the length needed.
IMPORTANT: If shower arm is located above tile/berglass
wall surface you must add distance from sheetrock to face
of tile/berglass shower wall to the above measurement.
10. Slide bottom escutcheon (13) over diverter body (12).
HINT—Lubricate escutcheon o-ring; a small amount of
soapy water will do the trick.
11. Loosen set screw (20) on diverter and slide lower mount (15)
into diverter body (12).
12. Push top tee (4) over inlet tting (2) until ush against
tting. Position diverter body (12) so shower pipe is plumb
(vertical).
13. Mark location of lower mount with pencil.
14. Wall surface must be clean of any residue and
completely dry.
OPTION 1: 3M Tape
Remove covering of 3M Tape and position mount on
marked locations.
OPTION 2: Glue
Apply glue as indicated in Figure 1, remove covering of 3M
tape and position mount on marked location.
15. Apply pressure to mount for 30 seconds by pushing rmly
against the wall. To ensure proper adhesion, allow one hour
before using your ShowerSpa and keep area around the
mount as dry as possible for the rst 24 hours. Tape and
glue will be fully cured after 24 hours.
NOTE: If supplied 2" nipple (1) is not correct length based on
above formula, you must obtain correct size NPT brass
nipple (sold separately), available at most hardware stores.
2. Apply generous amount of PTFE Thread Sealant Tape (24)
to both ends of nipple (1).
3. Hand tighten inlet tting (2) onto nipple (1), then nipple
to tting in wall. Use adjustable wrench on inlet tting to
tighten both connections simultaneously until both are
secure with no leaks.
4. Slide hand shower holder (9) o shower pipe (7).
5. Slide soap dish (8) onto shower pipe to desired position
and secure with set screw (25). For model 1077 slide soap
dish retainer onto shower pipe. Slide plastic soap dish onto
shower pipe and push soap dish down until ush
with retainer.
CAUTION—DO NOT OVERTIGHTEN
6. Reinstall hand shower hanger (9).
7. Secure swivel joint onto bottom of diverter body (12). Swivel
joint should move freely side to side.
CAUTION—DO NOT OVERTIGHTEN
8. Insert shower pipe (7) into top tee (4). Secure with set screw
(17).
Back of wall mount
Glue
Tape
OPTIONAL: Secure lower mount with permanent wall anchors.
Mark hole locations in lower mount (15). Drill 1
holes using 6mm (1/4") masonry/tile drill bit. Insert wall
anchors (16) and secure lower mount with screws (14).
CAUTION —LIVE PLUMBING IN WALL
16. Position shower pipe (7) parallel to wall by sliding diverter
body (12) on lower mount (15). Secure diverter to lower
mount with set screw (20).
17. Insert rubber washer (21) into both ends of hose (11).
Connect hex head end to swivel joint (18) and tapered
end to hand shower (10). Place hand shower (10) into
adjustable hanger (9).
18. Tighten shower head (6) securely to shower arm (5).
1/4"
deep
3
Page 4
Accessories
Accessories available at www.PulseShowerSpas.com
Adjustable Mirror Short pipe Kauai III
Usage
Diverter valve controls the showerhead and handshower function. Turn
diverter clockwise for hand shower, counterclockwise for shower head.
Position between for both functions.
Turn face of hand shower to switch settings.
Adjust the hand shower position by depressing the button on the hanger
and sliding up or down.
Always turn cold water on rst to help prevent any accidental burning or
scalding; especially for children and elderly.
This Shower System is equipped with Spray Straight™ technology in
the tips of the showerhead and hand shower. If the stream becomes
obstructed from mineral deposits, simply rub the soft tips with your
nger to loosen the deposits.
DO NOT use any part of the Shower System as a
support device.
MANUFACTURER'S LIFETIME LIMITED WARRANTY
1. Defec ts Covered; Warranty Period. Pulse Shower Spas, Inc. (“Pulse”)
warrants to the original consumer purchaser who purchases this shower
spa (the “Product”) for use in his or her own home, that the Product will
be free from defects in material and manufacturing workmanship for as
long as the original consumer purchaser owns that same home. For all
other purchasers (including, but not limited to purchasers for industrial,
commercial and business use), the above warranty will apply for a period of
5 years from the original date of purchase.
2. Remedy. If the Product does not conform to the above warranty,
Pulse, at its option, will repair or replace the Product, free of charge,
or refund your purchase price. For warranty claims, please visit ww w.
pulseshowerspas.com/index.php/warranty. Pulse may require that you
return the Product to Pulse, shipping prepaid, in which case Pulse will
provide you with a return materials authorization number (RMA). Pulse
may also require that you provide evidence of the date you purchased the
Product. Pulse will ship a new or repaired Product to you, at the expense
of Pulse, or refund your purchase price. Service labor performed by you or
others in connection with the removal or replacement of the Product will
not be reimbursed by Pulse.
3. Exclusions. Pulse shall not be responsible for failure of the Product,
and the above warranties will not apply, if the Product fails as a result of
improper installation, improper use, modications or repairs by anyone
other than Pulse, or accident or abuse (including damage during shipment).
4. Warranty on Repairs and Replacements. For consumer purchasers who
purchased the Product for home use, repaired or replacement Produc ts will
continue to be covered under this warranty for as long as he or she owns
that same home. For other purchasers, repaired or replacement Products
will be covered for the balance of the original warranty period.
Care and Maintenance
To keep your Shower System looking new, wipe down after each use with
a soft cotton cloth.
Protect your Shower System from hard water stains and mineral deposits
by periodically using an auto spray wax.
Clean using mild liquid soap and a non-abrasive sponge or cloth. Rinse
with clean water.
If the ow rate of your Shower System is less than desired or reduces over
time, ow restrictors located
in the inlet tting can be removed for cleaning.
If further assistance is required please visit
www.PulseShowerSpas.com and we will be happy to assist you.
Do Not Use Any Kind Of
Chemicals Or Abrasives!
5. No Other Warranties; Limitation of Liability. OTHER THAN THE
LIFETIME LIMITED WARRANTY S TATED ABOVE, PULSE DISCLAIMS ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. THE REMEDIES STATED ABOVE ARE YOUR SOLE REMEDIES IN
CONNECTION WITH THIS WARRANT Y. IN NO EVENT WILL PULSE BE
LIABLE TO YOU FOR ANY DAMAGES, WHETHER DIRECT, INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR BUSINESS INTERRUPTION, ARISING
OUT OF OR RELATING TO THE PRODUC T OR ITS USE, WHETHER
UNDER A CONTRACT, WARRANTY, TORT, OR ANY OTHER CAUSE OF
ACTION, EVEN IF PULSE HAS BEEN ADVISED OF THE POSSIBILIT Y OF
SUCH DAMAGES. NOT WITHSTANDING THE TERM OF ANY LIMITED OR
IMPLIED WARRANTY, OR IN THE EVENT THAT ANY LIMITED WARRANTY
FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL PULSE’S
ENTIRE LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT.
SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS
LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE AND
PROVINCE TO PROVINCE.
PULSE ShowerSpas, Inc. | 297 Anna Street | Watsonville, CA 95076 | 831.724.7300
www.PulseShowerSpas.com
PULSE20-REV.E
Loading...