Pulse APA200, APA500, APA800 User Manual

www.pulse-audio.co.uk | APA Series User Manual

APA Series Power Amplifiers

APA200, APA500, APA800

SPECIFICATIONS

APA200

APA500

APA800

Output Max per channel @ 4Ω

200W

500W

800W
Output RMS per channel @ 4Ω

100W

250W

400W
Output Max per channel @ 8Ω

140W

340W

540W
Output RMS per channel @ 8Ω

70W

170W

270W
Dimensions

88 x 482 x 270mm

88 x 482 x 340mm

88 x 482 x 340mm
Weight (unpacked)

6.8kg

9.1kg

12.3kg

• 19” Rackmount (2U)

• High power output

• Combo XLR/6.3mm jack and RCA inputs

• Speaker, 6.3mm jack and binding-post outputs

• Fan cooled

• Output circuit overload protection

• Mains powered via IEC connector

www.pulse-audio.co.uk | APA Series User Manual

INTRODUCTION

FRONT PANEL

REAR PANEL

Thank you for purchasing this Pulse APA-series power amplifier.

This product is intended to give long term, reliable service in normal usage.
Please read these instructions before use to avoid incorrect operation and outline the functions and controls.

(1) VENTILATION GRILLE - Do not cover or restrict airflow

(2) CHANNEL A+B LEVEL - Attenuate output levels
(3) INDICATOR LEDS - Show signal present, clipping or protect mode
(4) POWER SWITCH - Switches mains power on/off

(5) COOLING FAN - Do not cover or restrict airflow

(6) VOLTAGE SELECTOR - Check voltage switch is in correct position for the mains power supply being used
(7) FUSED IEC MAINS INLET - - to replace fuse, disconnect mains lead & open with flat screwdriver
(8) OUTPUT SECTION

Connect speakers using speaker sockets, jack or binding posts

(9) INPUT SECTION

Connect mixer or other audio source via combo XLR/jack or RCA L+R