Pulse MILITARY PRODUCTS, AEROSPACE PRODUCTS User Manual

SM = Surface Mount

G003.U (2/07)

www.pulseeng.com

63

Pulse is one of the leading manufacturers of magnetic interface transformers, data bus

couplers, delay lines, Ethernet transformers, and custom electronic components for

Military/Aerospace applications. Both catalog and custom designs include a comprehensive

range of high-performance solutions and packaging for QPL and non-QPL MIL-STD-1553

interface transformers, various MIL-STD-1553 Data Bus Couplers and QPL and non-QPL

active and passive delay lines. In addition, Copperhead transformers and transceivers
support a variety of high-speed applications that includes Fibre Channel, Gigabit

Ethernet, SONET, HDTV, IEEE1394B, SMTPE, Ethernet and AFDX buses.

Pulse's Military/Aerospace products are designed to meet the most demanding requirements
for military, aerospace and industrial applications. For catalog and/or custom designed products, contact Pulse’s Military/Aerospace
Division at 215-781-6400 or find an authorized distributor or representative on the Pulse website. See back cover.

Military/Aerospace Products

100B-1001 1CT:1CT T, C, S T,C 12-pin SMT .630 / .470 / .185 M101
100B-1001X 1CT:1CT T, C, S T,C 12-pin SMT .630 / .470 / .185 M101

Single 100B-1003 1CT:1CT T,C T,C 16-pin SOIC .500 / .265 / .235 M101

100B-1003X 1CT:1CT T,C T,C 16-pin SOIC .500 / .265 / .235 M101

Dual

100B-2002 1CT:1CT T, C T,C 24-pin SMT .518 / .595 / .241 M110
100B-2002X 1CT:1CT T, C T,C 24-pin SMT .518 / .595 / .241 M110

Quad

100B-4005 1CT:1CT T,C T,C 40-pin SOIC 1.120 / .480 / .280 M102
100B-4005X 1CT:1CT T,C T,C 40-pin SOIC 1.120 / .480 / .280 M102

1. Web: http://www.pulseeng.com/products/datasheets/M101.pdf or M102.pdf

2. T = Transformer, C = Choke, S = Shunt inductor, SMT = 50 mil pitch leads, SOIC = 100 mil pitch leads

10/100

Number Part Turns Configuration

2

Package Data

of Ports Number Ratio RX TX Style Size L/W/H (in.) Sheet

1

CopperheadTMSeries

1, 2

T-330SCT 1CT:1CT 26.0 (@ 1.0 Vrms, 10 0 kHz) 350 0.2 1500 -1.5 (15-165 MHz) 265.625 (quarter speed)
T-1062SCT 1CT:1CT 3.75 (@ 1.0 Vrms, 100 kHz) 280 0.2 1500 -2.0 (100-625 MHz) 1062.50 (full speed)
T-1250SCT 1CT:1CT 3.75 280 0.2 1500 -2.0 1250
T-1485SCT 1CT:1CT 3.75 280 0.2 1500 -2.0 1485

(SMPTE)

T-3200SCT 1:1 0.70 200 0.2 1500 -4.50 3200

1. Web: http://www.pulseeng.com/products/datasheets/M105.pdf

2. Dual Transformers designed specifically for Point-to-Point Coupling to 150 Ω Twinax Cable: Withstands infrared and vapor phase soldering; Military Temp Range =

-55°C to +125°C; Weight = 1.0 grams; Surface Mount = pick-and-place compatible. Applications: Fibre Channel, Gigabit Ethernet, SONET, HDTV, IEEE 1394B, SMTPE.

Application Notes: These isolation transformers protect the station from static charges that may develop on the cable and prevent ground loop currents from being

transferred between stations. They have also been designed to provide common mode rejection within the transmission band, reducing EMI.

Part Turns Ratio Primary Inductance Rise Time DC Resistance Hipot Insertion Loss Application Nominal

Number (±5%) (µH MIN) (ps MAX @ 20-80%) (Ω MAX) (Vrms MIN) (dB MAX) Bit Rate (Mbaud)

High Speed Data and Communications over
100+ Meters of Copper:

●

Withstands infrared and vapor phase soldering

●

Military temperature range -55°C to +125°C

●

Low transmit/receive jitter

●

Low power dissipation; 450 mW typical

●

ECL logic interface

●

Surface mount – pick and place compatible

Applications:

Fibre Channel, Gigabit Ethernet, SONET, HDTV,
IEEE 1394B, SMTPE

CopperheadTMSeries Transceiver Line Interface Modules

Ordering Information

1

HIGH SPEED DATA BUS

MILITARY/AEROSPACE ETHERNET/AFDX

1.Web: http://www.pulseeng.com/products/datasheets/fibre.pdf

MILITARY/AEROSPACE PRODUCTS

64

www.pulseeng.com

G003.U (2/07)

Non-QPL, Low Profile and Stacked

1

Part

2

Turns Ratio Impedance Package

* Data

Number (±3%) (Ω MIN) L/W/H (in.) Sheet

Part

2

Turns Ratio Impedance Package* Data

Number (±3%) (Ω MIN) L/W/H (in.) Sheet

FL1553-1 1CT:1CT/1CT:.707CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

GL1553-1 1CT:1CT/1CT:.707CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

TL1553-1 1CT:1CT/1CT:.707CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

FL1553-2 1.4CT:1CT/2CT:1CT 7,200 .630 / .630 / .155 NQPLC2

2, 3

GL1553-2 1.4CT:1CT/2CT:1CT 7,200 .630 / .630 / .155 NQPLC2

2, 3

TL1553-2 1.4CT:1CT/2CT:1CT 7,200 .630 / .630 / .155 NQPLC2

2, 3

FL1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

GL1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

TL1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

FL1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

GL1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

TL1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

FL1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

GL1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

TL1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .630 / .630 / .155 NQPLC2

2, 3

DFL1553-1 1CT:1CT/1CT:.707CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DGL1553-1 1CT:1CT/1CT:.707CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DTL1553-1 1CT:1CT/1CT:.707CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DFL1553-2 1.4CT:1CT/2CT:1CT 7,200 .930 / .630 / .155 NQPLC2

2, 3

DGL1553-2 1.4CT:1CT/2CT:1CT 7,200 .930 / .630 / .155 NQPLC2

2, 3

DTL1553-2 1.4CT:1CT/2CT:1CT 7,200 .930 / .630 / .155 NQPLC2

2, 3

DFL1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DGL1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DTL1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DFL1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DGL1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DTL1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DFL1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DGL1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

DTL1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .930 / .630 / .155 NQPLC2

2, 3

STQ1553-1 1CT:1CT/1CT:.707CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

STQ1553-2 1.4CT:1CT/2CT:1CT 7,200 .630 / .630 / .340 NQPLC2

2, 3

STQ1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

STQ1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

STQ1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

SFQ1553-1 1CT:1CT/1CT:.707CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

SGQ1553-1 1CT:1CT/1CT:.707CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

SFQ1553-2 1.4CT:1CT/2CT:1CT 7,200 .630 / .630 / .340 NQPLC2

2, 3

SGQ1553-2 1.4CT:1CT/2CT:1CT 7,200 .630 / .630 / .340 NQPLC2

2, 3

SFQ1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

SGQ1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

SFQ1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

SGQ1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

SFQ1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

SGQ1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .630 / .630 / .340 NQPLC2

2, 3

SLQG1553-1 1CT:1CT/1.4CT:1CT 4,000 .630 / .630 / .280 M104

2

SLQG1553-2 1.4CT:1CT/2CT:1CT 7,200 .630 / .630 / .280 M104

2

SLQG1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .630 / .630 / .280 M104

2

SLQG1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .630 / .630 / .280 M104

2

SLQG1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .630 / .630 / .280 M104

2

SLQT1553-1 1CT:1CT/1.4CT:1CT 4,000 .630 / .630 / .280 M104

2

SLQT1553-2 1.4CT:1CT/2CT:1CT 7,200 .630 / .630 / .280 M104

2

SLQT1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .630 / .630 / .280 M104

2

SLQT1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .630 / .630 / .280 M104

2

SLQT1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .630 / .630 / .280 M104

2

SLQF1553-1 1CT:1CT/1.4CT:1CT 4,000 .630 / .630 / .280 M104

2

SLQF1553-2 1.4CT:1CT/2CT:1CT 7,200 .630 / .630 / .280 M104

2

SLQF1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .630 / .630 / .280 M104

2

SLQF1553-5 1CT:2.12CT/1CT:1.5CT 4,000 .630 / .630 / .280 M104

2

SLQF1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .630 / .630 / .280 M104

2

1. Designed and built to conform to MIL-PRF-21038/27

2. Web: http://www.pulseeng.com/products/datasheets/N_QPL_Cat2_links.pdf

or M104.pdf

3. Prefix / Operating Temperature : xxxC1553-xx / 0°C to +70°C ; xxxN1553-xx /

-40°C to +85°C; xxx1553-xx / -55°C to +125°C

MIL-STD-1553

x1553-1 1CT:1CT/1CT:.707CT 4,000 .625 / .625 / .250 NQPLC2
x1553-2 1.4CT:1CT/2CT:1CT 7,200 .625 / .625 / .250 NQPLC2
x1553-3 1.25CT:1CT/1.66CT:1CT 4,000 .625 / .625 / .250 NQPLC2
x1553-5 1CT:2.12CT/1.5CT:1CT 4,000 .625 / .625 / .250 NQPLC2
x1553-45 1CT:2.5CT/1CT:1.79CT 4,000 .625 / .625 / .250 NQPLC2

1. Designed and built to conform to MIL-PRF-21038/27

2. Prefix / Operating Temperature: C / 0°Cto +70°C; N / -40°C to +85°C;
TQ / -55°C to +125°C

3. Web: http://www.pulseeng.com/pdf/N_QPL_Cat2_links.pdf

Interface Transformers: COTS Series

1

Part

2

Turns Ratio Impedance Package

* Data

3

Number (±3%) (W MIN) (L/W/H) in. Sheet

SMG1553-60 1.25CT:1CT 4,000 .400 / .400 / .185 M112
SMG1553-61 1.66CT:1CT 4,000 .400 / .400 / .185 M112
SMG1553-62 1.41CT:1CT 7,200 .400 / .400 / .185 M112
SMG1553-63 2CT:1CT 7,200 .400 / .400 / .185 M112
SMG1553-65 1CT:1.79CT 4,000 .400 / .400 / .185 M112

SMG1553-66 1CT:2.7CT 4,000 .400 / .400 / .185 M112

Interface Transformers - Low Profile Miniature Series

Part Turns Ratio Impedance Package

* Data

Number (±3%) (Ω MIN) (L/W/H) in. Sheet

MILITARY/AEROSPACE PRODUCTS

1000B-5001 1CT:1CT T, C, S T, C, S 24-pin SOIC .695 / .635 / .230 M106

Single

1000B-5001X 1CT:1CT T, C, S T, C, S 24-pin SOIC .695 / .635 / .230 M106
1000B-5002 1CT:1CT T, C, S T, C, S 24-pin SOIC .695 / .635 / .230 M106
1000B-5002X 1CT:1CT T, C, S T, C, S 24-pin SOIC .695 / .635 / .230 M106

Dual

1000B-5003 1CT:1CT T, C T, C 50-pin SOIC

2

1.095 / .430 / .340 M106

1000B-5003X 1CT:1CT T, C T, C 50-pin SOIC

2

1.095 / .430 / .340 M106

1. Web: http://www.pulseeng.com/products/datasheets/M106.pdf

2. 0.99mm (.039") pitch leads

3. T = Transformer, C = Choke, S = Shunt inductor, SMT = 50 mil pitch leads, SOIC = 100 mil pitch leads

Gigabit

Number Part Turns Configuration

3

Package Data

of Ports Number Ratio RX TX Style Size L/W/H (in.) Sheet

1

MILITARY/AEROSPACE ETHERNET/AFDX

(continued)

*Mounting: FP = Flat Pack TH = Through Hole SM = Surface Mount

Military/Aerospace Products

G003.U (2/07)

www.pulseeng.com

65

QPL Series — Qualified to MIL-PRF-21038/27

Part

1

Military

Turns Ratio Impedance Package*Data

2

Number

Designation

(±3%) L/W/H (in.) Sheet

Number

(Ω MIN)

Part

1

Military

Turns Ratio Impedance Package*Data

2

Number

Designation

(±3%) L/W/H (in.) Sheet

Number

(Ω MIN)

MIL-STD-1553

(continued)

Q1553-20 M21038/27-05 1:1.41 3,000 .500 / .350 / .250 QPL6
Q1553-21 M21038/27-06 1CT:1CT 3,000 .500 / .350 / .250 QPL6
Q1553-22 M21038/27-07 1CT:1.41CT 3,000 .500 / .350 / .250 QPL6
Q1553-23 M21038/27-08 1CT:1.66CT 3,000 .500 / .350 / .250 QPL6
Q1553-24 M21038/27-09 1CT:2CT 3,000 .500 / .350 / .250 QPL6
Q1553-25 M21038/27-28 1CT:1.5CT 3,000 .500 / .350 / .250 QPL6
Q1553-51 M21038/27-29 1CT:1.79CT 3,000 .500 / .350 / .250 QPL6
Q1553-52 M21038/27-30 1CT:2.5CT 3,000 .500 / .350 / .250 QPL6
Q1553-1 M21038/27-01 1CT:1CT/1CT:.707CT 4,000 .625 / .625 / .250 QPL6
Q1553-2 M21038/27-02 1.4CT:1CT/2CT:1CT 7,200 .625 / .625 / .250 QPL6
Q1553-3 M21038/27-03 1.25CT:1CT/1.66CT:1CT 4,000 .625 / .625 / .250 QPL6
Q1553-5 M21038/27-10 1CT:2.12CT/1CT:1.5CT 4,000 .625 / .625 / .250 QPL6
Q1553-45 M21038/27-26 1CT:2.5CT/1CT:1.79CT 4,000 .625 / .625 / .275 QPL6
Q1553-81 M21038/27-21 1CT:1CT/1CT:.707CT 4,000 .625 / .625 / .275 QPL6
Q1553-82 M21038/27-22 1.4CT:1CT/2CT:1CT 7,200 .625 / .625 / .275 QPL6
Q1553-83 M21038/27-23 1.25CT:1CT/1.66CT:1CT 4,000 .625 / .625 / .275 QPL6
Q1553-84 M21038/27-24 1CT:2.12CT/1CT:1.5CT 4,000 .625 / .625 / .275 QPL6
Q1553-85 M21038/27-25 1CT:2.5CT/1CT:1.79CT 4,000 .625 / .625 / .275 QPL6

FPQ1553-6 M21038/27-16 1CT:1CT/1CT:.707CT 4,000 .625 / .625 / .250 QPL6
SMQ1553-6 M21038/27-11 1CT:1CT/1CT:.707CT 4,000 .625 / .625 / .250 QPL6
FPQ1553-7 M21038/27-17 1.4CT:1CT/2CT:1CT 7,200 .625 / .625 / .250 QPL6
SMQ1553-7 M21038/27-12 1.4CT:1CT/2CT:1CT 7,200 .625 / .625 / .250 QPL6
FPQ1553-8 M21038/27-18 1.25CT:1CT/1.66CT:1CT 4,000 .625 / .625 / .250 QPL6
SMQ1553-8 M21038/27-13 1.25CT:1CT/1.66CT:1CT 4,000 .625 / .625 / .250 QPL6
FPQ1553-10 M21038/27-20 1CT:2.12CT/1CT:1.5CT 4,000 .625 / .625 / .250 QPL6
SMQ1553-10 M21038/27-15 1CT:2.12CT/1CT:1.5CT 4,000 .625 / .625 / .250 QPL6
FPQ1553-45 M21038/27-31 1CT:2.5CT/1CT:1.79CT 4,000 .625 / .625 / .250 QPL6
SMQ1553-45 M21038/27-27 1CT:2.5CT/1CT:1.79CT 4,000 .625 / .625 / .250 QPL6

1. Part number options: C and T level QPL testing (xxQC1553-xx, xxQT1553-xx,

M21038/27-xxC, M21038/27-xxT).

2. Web: http://www.pulseeng.com/products/datasheets/QPL6.pdf

3. Summary Performance Specifications: Droop = 20%; Overshoot = ±1 VMAX;
Common Mode Rejection = 45 dB; Frequency Range (no load) = 75 kHz to

1 MHz; Operating Temperature Range = -55°C to +130°C; Weight = 5 grams;
Insulation Resistance = 10 kMΩ @ 250 VDC; Dielectric Withstanding
Voltage = 100 Vrms

*Mounting: FP = Flat Pack TH = Through Hole SM = Surface Mount

Pulse offers off-the-shelf inductors and transformers for modern military and aerospace power applications--the SLED™, the SLIC,
and the POGO™ series. The SLED series consists of rail-mount inductors with a ruggedized header for durable board connections,

utilizing two rails for board mounting and cores bonded to high temperature headers for
durability and mechanical strength. The SLIC series, self-leaded transformers and inductors,
have ruggedized construction. The structural header is bonded to the cores and lead wires,

increasing mechanical durability. The POGO series are pad-mounted inductors with open

construction for robust board mounting with rugged pins used for both surface board-mounting

and electrical connection.

To locate the current data sheets for these products, go to the Pulse website at the following URL:

http://www.pulseeng.com

and click the “Military / Aerospace” tile on the Pulse home page.

Toroid Power Inductors - SLED Series

Part @ IRATED IRATED DCR Inductance Package* Data

Number (µH) (A) (mΩ MAX) @0ADC(µH) L/W/H (in.) Sheet

Part @ IRATED IRATED DCR Inductance Package* Data

Number (µH) (A) (mΩ MAX) @0ADC(µH) L/W/H (in.) Sheet

Toroid Power Inductors - SLED Series

(continued

OFF-THE-SHELF POWER INDUCTORS & TRANSFORMERS

SLED 20

PL8100 1.01 3.40 11 1.1 .400 / .345 / .250 M107
PL8101 6.2 1.40 70 7 .400 / .345 / .250 M107
PL8102 17.6 1.00 125 22.7 .400 / .345 / .250 M107

SLED 30

PL8110 3.8 4.80 17.3 5.2 .625 / .525 / .400 M107
PL8111 9.4 2.80 43.4 12.3 .625 / .525 / .400 M107
PL8112 29.7 1.40 166 35.3 .625 / .525 / .400 M107
PL8113 114 0.94 380 167 .625 / .525 / .400 M107

SLED 40

PL8120 2.5 8.00 8.3 3.8 .725 / .575 / .410 M107
PL8121 5.1 5.40 17.7 7.5 .725 / .575 / .410 M107
PL8122 16.2 2.70 72 21.9 .725 / .575 / .410 M107
PL8123 58.1 1.30 290 73 .725 / .575 / .410 M107
PL8124 192 0.90 560 292 .725 / .575 / .410 M107
PL8125 383 0.72 862 672 .725 / .575 / .410 M107
PL8130 4.9 7.80 12.4 7.9 .725 / .575 / .410 M107
PL8131 9 5.50 28 14 .725 / .575 / .410 M107
PL8132 29.1 2.70 100 40.5 .725 / .575 / .410 M107
PL8133 645 0.74 1250 1134 .725 / .575 / .410 M107
PL8150 0.81 14.30 2.5 1.25 .725 / .575 / .410 M107
PL8151 1.32 11.50 4.0 2.1 .725 / .575 / .410 M107

SLED 50

PL8140 9.3 7.20 18.7 16 .900 / .690 / .520 M107
PL8141 16.1 5.10 32.0 25.9 .900 / .690 / .520 M107
PL8142 50 2.60 133 72.9 .900 / .690 / .520 M107
PL8143 x1070 0.71 1700 1950 .900 / .690 / .520 M107
PL8160 1.68 13.90 3.6 2.8 .900 / .690 / .520 M107
PL8161 2.5 11.40 5.4 4.2 .900 / .690 / .520 M107
PL8170 3.5 12.40 6.6 6.5 .900 / .690 / .520 M107
PL8171 4.7 10.40 8.3 8.4 .900 / .690 / .520 M107

SMT Common Mode Chokes: SLIC Series

Part Inductance IRATED DCR Package* Data

Number (mH ±35%) (A) (mΩ MAX) L/W/H (in.) Sheet

PL8200 0.47 14.0 8 1.220 / 1.000 / .500 M108
PL8201 0.63 11.6 10 1.220 / 1.000 / .500 M108
PL8202 0.81 9.70 14 1.220 / 1.000 / .500 M108
PL8203 0.53 7.20 15 1.110 / 1.00 / 395 M108
PL8204 0.59 5.60 21 .770 / .670 / .395 M108
PL8205 0.77 4.70 40 .770 / .670 / .395 M108
PL8206 0.22 3.30 60 .770 / .670 / .390 M108
PL8207 1.32 3.30 60 .770 / .670 / .395 M108
PL8208 1.47 2.80 80 .770 / .670 / .395 M108
PL8209 0.88 1.63 110 .500 / .500 / .215 M108
PL8210 1.17 1.22 200 .500 / .500 / .215 M108

Military/Aerospace Products

MILITARY/AEROSPACE PRODUCTS

66

www.pulseeng.com

G003.U (2/07)

Frequency (MHz)

1K

Impedance (W)

4

1

2

3

5

0

2K

3K

4K

5K

6K

7K

0

0.01 0.1 1 10 100

OFF-THE-SHELF POWER INDUCTORS & TRANSFORMERS

(continued)

SMT Power Inductors: Toroid, POGO Series

POGO 40

PL8400S43.6 1.1 309 77 .725 / .575 / .380 M111

POGO 50

PL8401S21.9 2.7 90.5 39.5 .910 / .700 / .510 M111
PL8402S4.025 6.4 23 6.575 .910 / .700 / .510 M111
PL8403P0.53 23.8 3 0.88 .910 / .700 / .510 M111
PL8404P1.1 21 2.5 2.1 .910 / .700 / .510 M111

POGO 60

PL8405P2.1 22.4 3.4 4 1.280 / 1.070 / .510 M111

1. Connection: P = Parallel, S = Series

SMT Power Inductors: Toroid, SLED Series

SLED 25

PL8500 9.4 3.8 32 10.4 .625 / .525 / .310 M113
PL8501 13.3 3.2 46 14.6 .625 / .525 / .310 M113
PL8502 23 2.4 74 25 .625 / .525 / .310 M113
PL8503 50 1.6 135 56 .625 / .525 / .310 M113
PL8504 75 1.3 220 83 .625 / .525 / .310 M113
PL8505 90 1.2 285 100 .625 / .525 / .310 M113
PL8506 137 1 425 152 .625 / .525 / .310 M113
PL8507 200 .82 673 220 .625 / .525 / .310 M113
PL8508 305 .66 972 331 .625 / .525 / .310 M113
PL8509 439 .56 1520 472 .625 / .525 / .310 M113

SMT Power Inductors: Toroid, POGO Series

SMT Power Inductors:Toroid, POGO Series

(continued)

SMT Common Mode Inductors:Toroid, POGO Series

SMT Power Inductors: Shielded Drum Core

POGO 25

PL8600

P

2.0 8.30 7.6 2.2 .625 / .525 / .310 M114

PL8601

P

2.4 7.20 10.9 2.6 .625 / .525 / .310 M114
PL8602P5.0 5.20 19.0 5.5 .625 / .525 / .310 M114
PL8600

S

7.0 4.16 16.0 8.75 .625 / .525 / .310 M114
PL8603P9.3 3.80 29.8 10.4 .625 / .525 / .310 M114
PL8601

S

8.4 3.78 21.8 10.4 .625 / .525 / .310 M114
PL8604P14.1 3.10 45.3 15.7 .625 / .525 / .310 M114
PL8605P19.8 2.6 66.3 22.1 .625 / .525 / .310 M114
PL8602S17.9 2.6 38.0 22.45 .625 / .525 / .310 M114
PL8606P29.3 2.20 106 32.8 .625 / .525 / .310 M114
PL8603S33.8 1.89 60 41.7 .625 / .525 / .310 M114
PL8607P42.6 1.80 151 47.6 .625 / .525 / .310 M114
PL8604S50.9 1.54 91 62.8 .625 / .525 / .310 M114
PL8608P61.3 1.50 224 67.5 .625 / .525 / .310 M114
PL8605S71.5 1.30 133 88.2 .625 / .525 / .310 M114
PL8609P84.2 1.20 324 91.0 .625 / .525 / .310 M114
PL8606S106.1 1.07 202 131.0 .625 / .525 / .310 M114
PL8607S154.2 0.89 302 190.3 .625 / .525 / .310 M114
PL8608S218.9 0.74 444 270.2 .625 / .525 / .310 M114
PL8609S295.0 0.64 636 364.0 .625 / .525 / .310 M114

POGO 40

PL8700P1.5 14.40 4.41 2.2 .725 / .600 / .380 M115
PL8701

P

2.4 11.20 6.54 3.5 .725 / .600 / .380 M115

PL8702P4.2 8.20 10.47 5.9 .725 / .600 / .380 M115
PL8703P5.8 6.80 14.94 7.9 .725 / .600 / .380 M115
PL8700S6.1 7.20 17.60 9.0 .725 / .600 / .380 M115
PL8704P7.6 5.70 20.99 10.1 .725 / .600 / .380 M115

POGO 40

(continued)

PL8701

S

9.7 5.60 26.20 14.0 .725 / .600 / .380 M115
PL8705P12.1 5.40 23.24 18.5 .725 / .600 / .380 M115
PL8702S17.0 4.10 41.90 23.7 .725 / .600 / .380 M115
PL8706P18.0 4.40 38.15 27.4 .725 / .600 / .380 M115
PL8703S23.1 3.40 59.70 31.5 .725 / .600 / .380 M115
PL8707P27.0 3.54 53.21 40.5 .725 / .600 / .380 M115
PL8704S30.6 2.85 84.00 40.5 .725 / .600 / .380 M115
PL8708P34.8 3.00 73.89 50.5 .725 / .600 / .380 M115
PL8705S48.5 2.70 93.00 74.1 .725 / .600 / .380 M115
PL8706S72.0 2.20 152.60 109.8 .725 / .600 / .380 M115
PL8708S139.1 1.50 295.60 202.2 .725 / .600 / .380 M115
PL8707S108.0 1.77 212.80 161.8 .725 / .600 /.380 M115

1. Connection: P = Parallel, S = Series

SMT Power Inductors: SLIC (HCCI-80) Series

Part @ IRATED IRATED DCR Inductance Package* Data

Number1(µH) (A) (mΩ) MAX @0ADC(µH) L/W/H (in.) Sheet

Part @ IRATED IRATED DCR Inductance Package* Data

Number1(µH) (A) (mΩ) MAX @0ADC(µH) L/W/H (in.) Sheet

Part Inductance I

RATED DCR SRF Impedance Package Data

Number (mH ±30%) (A) (mΩ) MAX (MHz) Curve

1

L/W/H (in.) Sheet

Part

Inductance

IRATED

1

DCR Inductance Saturation

Package Data

Number

@IRATED

(A)

(mΩ @0ADC2Current

L/W/H (in.) Sheet

(µH TYP) MAX) (µH) @25°C

PL8304P1.1 38 1.3 2.1 1.220 / 1.000 / .500 M109
PL8303P1.6 34 1.6 3.5 1.220 / 1.000 / .500 M109
PL8302P2.45 27 2.5 5.1 1.220 / 1.000 / .500 M109
PL8301P3.2 24 3.5 7.2 1.220 / 1.000 / .500 M109
PL8304S4.3 19 5.1 8.4 1.220 / 1.000 / .500 M109
PL8300P4.52 19 4.8 9.5 1.220 / 1.000 / .500 M109
PL8303S6.4 17 6.4 13.8 1.220 / 1.000 / .500 M109
PL8302S9.8 13.5 10.1 20.4 1.220 / 1.000 / .500 M109
PL8301S12.8 12 13.8 28.7 1.220 / 1.000 / .500 M109
PL8300S18.1 9.5 19.3 38.0 1.220 / 1.000 / .500 M109

1. Connection: P = Parallel, S = Series

POGO 40

PL8801 1.5 1.50 60 2 2 .725 / .575 / .380 M116
PL8803 10.0 1.00 450 0.5 4 .725 / .575 / .380 M116
PL8804 22.0 0.50 850 0.3 5 .725 / .575 / .380 M116

POGO 50

PL8800 1.0 3.60 50 4 1 .910 / .700 / .510 M116
PL8802 3.0 2.50 80 2.2 3 .910 / .700 / .510 M116

1. See graph:

PL8901 0.80 11 4.0 1.0

2

14 .413 / .413 / .280 M117

PL8902 1.20 10 6.0 1.5

2

13 .413 / .413 / .280 M117

PL8903 2.1 9.0 7.3 2.7

2

11 .413 / .413 / .280 M117

PL8904 2.9 8.0 8.5 3.7

2

9.2 .413 / .413 / .280 M117

PL8905 3.7 7.3 9.5 4.7

2

8.2 .413 / .413 / .280 M117

PL8906 4.8 6.0 16.5 6.0

2

6.9 .413 / .413 / .280 M117

PL8907 6 5.5 18.5 7.6

2

6.2 .413 / .413 / .280 M117
PL8908 8 5.0 21.8 10 5.5 .413 / .413 / .280 M117
PL8909 9.6 4.5 29.0 12 5.1 .413 / .413 / .280 M117
PL8910 12 4.1 35.4 15 4.4 .413 / .413 / .280 M117
PL8911 14.4 4.0 37.0 18 4.3 .413 / .413 / .280 M117
PL8912 17.6 3.8 42.0 22 3.8 .413 / .413 / .280 M117
PL8913 21.6 3.4 45.9 27 3.4 .413 / .413 / .280 M117
PL8914 26.4 3.0 64.8 33 3.0 .413 / .413 / .280 M117
PL8915 31.2 2.7 81.5 39 2.8 .413 / .413 / .280 M117
PL8916 37.6 2.6 89.0 47 2.6 .413 / .413 / .280 M117
PL8917 54.4 2.1 135.0 68 2.1 .413 / .413 / .280 M117

1. The rated current as listed is either the saturation current or the heating current

depending on which value is lower.

2. Inductance at 0ADC tolerance is ±30%. The tolerance is ±20% on all other parts.

Optional Tape and Reel packaging can be ordered by adding a "T" suffix to the end of

the part number.

SM = Surface Mount

Military/Aerospace Products

MILITARY/AEROSPACE PRODUCTS