Psion Teklogix WA1210-G2, 7525M, 7525C, WA1310-G2, 7527 C User Manual

...
WA1210-G2 & WA1310-G2
WORKABOUT PRO
Powered Vehicle Cradle User Manual
September, 2007 Part N0. 400209.A
© COPYRIGHT 2007 BY PSION TEKLOGIX INC., MISSISSAUGA, ONTARIO
Psion Teklogix Inc., is issued in strict condence, and is not to
be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.
All trademarks are property of their respective holders.
Return-To-Factory Warranty
Psion Teklogix provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the statement of Warranty and Product Support provided at:
www.psionteklogix.com/warranty.
The warranty on Psion Teklogix manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an autho­rized Psion Teklogix service organization. See Psion Teklogix terms and conditions of sale for full details.
Important: Psion Teklogix warranties take effect on the date of
shipment.
Service
Psion Teklogix provides a complete range of product support services to its customers.
For detailed information, please refer to Chapter 5: Support
Services & Worldwide Ofces. This section also provides
information about accessing support services through the Psion Teklogix web site.
Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
This Product, and its accessories, comply with the requirements of the Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC.
If your end-of-life Psion Teklogix product or accessory carries a label as shown here, please contact your local country repre­sentative for details on how to arrange recycling. For a list of international subsidiaries, please go to:
http://www.psionteklogix.com/EnvironmentalCompliance
List of Approvals
North America
EMC: FCC part 15, subpart B; class B
Europe
EMC and Low Voltage Directives
This equipment complies with the essential requirements of EMC Directive 2004/108/EC and Low Voltage Directive 72/23/EEC Declaration of Conformity available on www.psionteklogix.com/DoC
CE Mark
When used in a residential, commercial or light industrial environment the product and its approved UK and European
peripherals fulll all requirements for CE marking.
E mark: vehicle directive 95/54/EEC
Most of the world countries - safety approvals covered by CB report based on EN60950-1.
Restriction On Hazardous Substances (RoHS) Directive 2002/95/EC
What is RoHS?
The European Union has mandated that high environmental standards be met in the design and manufacture of electronic and electrical products sold in Europe, to reduce hazardous substanc­es from entering the environment.
The “Restriction on Hazardous Substances Directive (RoHS)” prescribes the maximum trace levels of lead, cadmium, mercury,
hexavalent chromium, and ame retardants PBB and PBDE that
may be contained in a product. Only products meeting these high environmental standards may be “placed on the market” in EU member states after July 1, 2006.
RoHS Logo
Although there is no legal requirement to mark the RoHS-com­pliant products, Psion Teklogix Inc. indicates its compliance with the directive as follows:
The RoHS logo located either on the back of the product or un­derneath the battery in the battery compartment (or on a related
accessory such as the charger or docking station) signies that
the product is RoHS-compliant as per the EU directive. Other than as noted below, a Psion Teklogix product that does not have
an accompanying RoHS logo signies that it was placed on the
EU market prior to July 1, 2006, and is thereby exempt from the directive.
Note: Not all accessories or peripherals will have a RoHS logo
due to physical space limitations or as a result of their exempt status.
Disclaimer
Every effort has been made to make this material complete, accurate, and up-to-date. In addition, changes are periodically added to the information herein; these changes will be incorpo­rated into new editions of the publication.
Psion Teklogix Inc. reserves the right to make improvements and/or changes in the product(s) and/or the program(s) described in this document without notice, and shall not be responsible for any damages, including but not limited to consequential dam­ages, caused by reliance on the material presented, including but not limited to typographical errors.
Declaration of Conformity
Declaration of Conformity Documents are provided at: www.psionteklogix.com/DoC
Table of Contents
1.0 Important Vehicle Cradle Instructions 1
2.0 Vehicle Cradle Mounting Recommendations 2
2.1 Cable Arrangement 7
2.2 Port Replicator Cable 7
3.0 The Vehicle Cradle 8
3.1 Wiring Vehicle Power to the Vehicle Cradle 8
4.0 Using the Vehicle Cradle 10
4.1 Cleaning and Maintaining the Vehicle Cradle 12
5.0 Support Services and Worldwide Ofces 13
5.1 Technical Support 13
5.2 Product Repairs 14
5.3 Worldwide Ofces 14
1Psion Teklogix WAPro Vehicle Cradle User Manual
Powered Vehicle Cradle:
WA1210-G2 7525M/C, 7527 C
WA1310-G2 7525S, 7527S
1.0 Important Vehicle Cradle Instructions
Before using a Vehicle Cradle, read all instructions and markings on the housing. Do not operate a Vehicle Cradle if struck by a sharp blow, dropped, or otherwise damaged in any way; qualied ser­vice personnel should inspect for internal damage.
Important: SAVE THESE INSTRUCTIONS – This manual
contains important operating and maintenance instructions for the Vehicle Cradle series.
DO NOT EXPOSE TO RAIN OR SNOW! However, the
Vehicle Cradles are designed to accept a wet WORKABOUT PRO without harmful effect.
Important: This WORKABOUT PRO Vehicle cradle cannot
be used with other non- WORKABOUT PRO cradle accessories. Although they may share the same battery terminating connector, they are designed with different applications in mind.
Loading...
+ 19 hidden pages