Proxxon BS/E User Manual
D-54343Föhren
BS /E
220V~
50/60Hz
100Watt
n
max
=13.00/min
Nr.:5800-0203
BS/E
Manual
1
2
D-54343
Föhren
BS/E
220
V~
50/60Hz
100
Watt
n
max
=1
3.00
=1
3.00
50/60
H
100
Wa
50
Hz
100
W
max
n
tt
=1
220
V
5/
60
z
at
22
Föhren
220
V~
2
50/60
BS/E
22
B
2
1
D-54343
Föhren
BS
/E
220
V~
50/60
Hz
100
Watt
n
max
=1
3.00/min
Nr.:
5800-0203
2
1
1
2
D-54343
Föhren
BS
/E
220
V~
50/60
Hz
100
Watt
n
max
=1
3.00/min
Nr.:
5800-0203
2
3
1
D-54343
Föhren
BS
/E
220
V~
50/60
Hz
100
Watt
n
max
=1
3.00/min
Nr.:
5800-0203
34
5
6
7
8
9
10
11
1
2
Fig. 1
Fig. 2 Fig. 3 Fig. 4
Fig. 5 Fig. 6
Fig. 7
-3-
1
2
1
2
-7-
Translation of the Original Operating
Instructions PROXXON -BS/E
WA
RNING!
Read all safety warnings and instructions!
Fa
ilure to followall safety warnings and instructions listed belowmay result in electric shock, fire and/or
serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUCTIONS FOR
THE FUTURE !
Attention:
Hold power tool by insulated gripping surfaces only,
when performing an operation where the cutting accessorymay contact hidden wiring or its own cord. Cutting
accessorycontacting a"live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
Legend
1. Speed regulator knob
2. ON -OFF switch
3. Unit hoop
4. Connection cable
5. Adapter for dust extraction
6. Drive roller
7. Tensioning bar
8. Tensioning roller
9. Grinding belt
10. Adjusting screw for belt run
11. Retaining knob
Scope of delivery
1pc. Belt sander BS/E
1pc. Storage case
1pc. Operating instructions
1pc. Safety guidelines
2pcs. Fansander K80
2pcs. Fansander K180
Description of the machine
The PROXXON band grinder BS/E
is alight, compact and user-friendly unit.
It can be used in modelling, tool manufacture and mould
manufacture, but also in repair work on motor vehicles.
The unit enables metal, plastic and wood to be processed.
It can be used for regrinding moulds, grinding small apertures and for polishing.
It can additionally be used for deburring and breaking edges,
removing paint and finely grinding surfaces.
Turning is carried out via amaintenance-free mitre gear.
The grinding belt is driven by arobust aluminium drum
which is equipped with adouble-bearing.
The tensioning roller is also equipped with ball bearings.
The grinding head may be swivelled, so thatwork in awkward places is also possible.
Technical data
Dimensions, weight:
Length approx. 330 mm
Weight approx. 650 g
Grinding belt length 330 x10mm
Head can be rotated by 60°
Motor:
Voltage: 230 V, 50/60 Hz
Power consumption: 80 W
hort-term operation: KB 5min
Belt speed: 225 bis 450 rpm
Noise generated: LPA: 90dB(A)
LWA: 103 dB(A)
General measuring uncertainty K=3 dB
Vibration at handle: ≤ 2.5 m/sec
2
Please note thatthe sound and vibration measurements in
particular have been performed with Proxxon bits and cutters. When using third-party brands we cannot guarantee
compliance with the statements given here!
Foruse in dryenvironments only
Protection class II device
Please do not dispose off
the machine!
Foryour safety,always wear hearing protection while working!
Risk of injury!
Never work without dust protection
mask and safety glasses. Some dusts
have ahazardous effect! Materials containing asbestos may not be machined!
Operation
Working with the unit.
Attention!
Provide asecure fixation of the workpiece! Workpiece should
be clamped with asuitable device. So the ejection of the
workpiece is prevented.
GB
Loading...