Protek SA AK47 Leaflet

AK47
Reg. No. L7673 Act No. 36 of 1947
A wettable powder contact insecticide packed in water soluble sachets, for the control of household pests as indicated.
Active ingredient:
lambda cyhalothrin (pyrethroid) 100 g/kg
Registration holder: Bitrad Consulting (Pty) Ltd
Co. Reg. No. 2002/025636/07 PO Box 51454, Wierdapark, 0149
For product information call: 011812 9800 Emergency number: 082446 8946
WARNINGS: • Handle with care. • Poisonous when swallowed, inhaled or absorbed through skin. • Skin, eye and mucous membrane irritant and a skin sensitizer. • Do not spray directly on food, eating utensils and surfaces where food is handled. • Store in a cool, dry place away from food and feed. • Toxic to fish and bees. • Keep out of reach of children, animals and uninformed persons.
PRECAUTIONS: • Do not use in the presence of persons with known sensitivity to pyrethroids. • In case of signs of sensitivity, obtain medical advice. • Do not eat, drink or smoke whilst mixing, spraying or before washing hands and face. • Do not inhale the spray mist. • Avoid contact with skin and eyes. • Prevent contamination of food, feed, drinking water and eating utensils. • Do NOT re-enter treated areas within one hour of application. Mattresses, bedding and furniture must be completely dry before using.
APPLICATION TABLE:
PEST
MOSQUITOES
HOUSE FLIES
BEDBUGS
COCKROACHES
DOSAGE
1 sachet per 1 litre water
1 sachet per 1 litre water
1 sachet per 1 litre water
1 sachet per 1 litre water
SAFE MIXING: When mixing product, wear face shield and rubber gloves. AK47 concentrate can harm your eyes and irritate your skin. Flush eye immediately with water on accidental contact. Wash immediately in case of skin contact. In case of product spills on clothes, change clothes immediately and only wear after thorough washing.
SAFE APPLICATION: Wear protective clothing with long sleeves, gloves, respiration mask and safety glasses when applying the product. Avoid contact with the spray as much as possible. Avoid spray drift onto non-target surfaces, food and eating utensils.
SAFETY AFTER APPLICATION: Clean applicator thoroughly by triple rinsing the applicator. Dispose of wash water where it cannot contaminate crops, grazing and water sources. Change and wash working clothes. Wash yourself. Do NOT re-enter treated areas within one hour of application. Mattresses, bedding and furniture must be complete dry before using.
DIRECTIONS FOR USE: Use only as directed and adhere to following safety instructions.
MIXING AND APPLICATION INSTRUCTIONS: • Use a spray bottle that delivers coarse droplets. • Fill spray bottle with the required volume of clean water. Ensure that pH of water is between 6 and 7. • Open the outer protective bag(s) and add the required number of water soluble sachets to the water in spray tank. • Agitate the mixture by stirring and/or shaking until sachets have dissolved and product is sufficiently in suspension. • Spray surfaces to the point of run-off.
Apply spray mixture to approximately 25 m
REMARKS
area, depending on material e.g. wood, brick wall, unpainted cement or painted cement etc. Cover all internal structural surfaces with the spray i.e. walls, roof/ceilings and furniture and externally around doors and windows.
Apply spray mixture to approximately 15 m area, depending on material e.g. wood, brick wall, unpainted cement or painted cement etc. Cover all internal structural surfaces with the spray i.e. walls, roof/ceilings and furniture and externally around doors and windows.
Apply spray mixture to approximately 25 m area, depending on material e.g. wood, brick wall, unpainted cement or painted cement etc. Cover all internal structural surfaces with the spray i.e. walls, roof/ceilings and infested furniture , especially bed frames as well as mattresses and bedding.
Apply spray mixture to approximately 25 m area, depending on material e.g. wood, brick wall, unpainted cement or painted cement etc. Cover walls, insides of cupboards and behind cupboards, shelved and undersides of shelves.
2
surface
2
surface
2
surface
2
surface
Loading...