ProTeam R840083, R840093 Owner's Manual

OWNER’S MANUAL
MODEL R840093 (107490)
LITHIUM ION BATTERY CHARGER
E N G
I
S H
WARNING
Read Owner's Manual before using this product. Failure to do so can result in injury or property damage.
TABLE OF CONTENTS
LITHIUM ION BATTERY CHARGER
Battery Charger Safety 3 Symbols 4 Features 5 Assembly 6 Operation 6-8 Maintenance 9 Battery Charger Parts List 10 Limited Warranty 11
Spanish 13 French 25
INSPECTION
Carefully unpack and inspect your new ProTeam Lithium Ion Battery Charger for shipping damage. Each unit is tested and inspected before shipping. All returns must have a Return Authorization Number (RAN). To request a RAN or to ask questions regarding this product, contact ProTeam at 866.888.2168 or customerservice.proteam@emerson.com.
This Owner’s Manual has important information for the use and safe operation of this charger. Read this manual carefully before charging a battery. Keep this manual available at all times and instruct all operators to read this manual. If instructions are not followed, an injury may occur or equipment, furniture or buildings may become damaged.
For new manuals please contact ProTeam, Inc. at: customerservice.proteam@emerson.com 8100 W. Florissant Ave, Building T, St. Louis, MO 63136
866.888.2168 or visit pro-team.com for a downloadable version. The contents of this manual are based on the latest product information
available at the time of publication. ProTeam reserves the right to make changes or improvements to its products without notice.
2 ProTeam
E N G
I
S H
E
S
P
A
˜
N O
F
R A
N
Ç A
I
S
WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all
instructions listed below may result in electric shock, fire, and/or serious personal injury.
• Before using charger, read all instructions and cautionary markings in this manual, on charger, on battery, and on product in order to prevent misuse of the products and possible injury or property damage.
WARNING: Charge only compatible 18V ProTeam batteries that are made to fit this
charger. Do not modify other batteries to fit this charger. Other types of batteries may burst, causing personal injury or damage.
• Do not use charger outdoors or expose to wet or damp conditions. Water entering charger will increase the risk of electric shock.
• Do not abuse cord or charger. Never use the cord to carry the charger. Do not pull the charger cord when disconnecting from receptacle. Grasp and pull the plug body only. Damage to the cord or charger could occur and create an electric shock hazard. If cord or charger is damaged, have the charger replaced by an authorized serviceman.
• Make sure cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, or otherwise subjected to damage or stress. This will reduce the risk of accidental falls, damage to the cord, and electric shock.
• Keep cord and charger from heat to prevent damage to housing or internal parts.
• Do not let gasoline, oils, petroleum-based products, etc. come in contact with plastic
parts. They contain chemicals that can damage, weaken, or destroy plastic.
• An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:
a. That pins on plug of extension cord are the same number, size and shape as those of
plug on charger. b. That extension cord is properly wired and in good electrical condition; and c. Do not use an extension cord that is longer than 100 feet and less than 16 AWG.
NOTE: AWG = American Wire Gauge
• To reduce the risk of shorting or electric shock, do not operate charger with a damaged cord or plug. If damaged, have the charger replaced by an authorized serviceman.
• Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized serviceman to determine if the charger is in good working order.
• Do not disassemble charger. Take it to an authorized serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
• To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.
• Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening and will help prevent damage to the charger during a power surge.
• Risk of electric shock. Do not touch uninsulated portion of output connector or uninsulated battery terminal.
IMPORTANT SAFETY INSTRUCTIONS
ProTeam 3
!
!
SAVE THESE INSTRUCTIONS
Violation of any of these instructions may void any and all warranties.
4 ProTeam
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
CALIFORNIA PROPOSITION 65
WARNING: This product may contain chemicals, including lead, known
to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling.
SYMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
NOTICE:
(Without Safety Alert Symbol) Indicates important information not related to an injury hazard, such as a situation that may result in property damage.
SYMBOL SIGNAL MEANING
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s Manual
To reduce the risk of injury, user must read and un­derstand operator’s manual before using this product.
Wet Conditions Alert Do not expose to rain or use in damp locations.
V Volts Voltage
Hz Hertz Frequency (cycles per second)
W Watt Power
Alternating Current Type of current Direct Current Type or a characteristic of current
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
!
ProTeam 5
FEATURES
PRODUCT SPECIFICATIONS
Battery Voltage - 18 V DC Charger Input - 120 V, AC only, 60 Hz Charge Time - Approximately 40 minutes NOTE: Charge time is dependent on the type of battery pack and level of existing charge.
KNOW YOUR CHARGER
See Figure 1. The safe use of this product requires an
understanding of the information on the product and in this operator’s manual. Before use of this product, familiarize yourself with all operating features and safety rules.
DIAGNOSTIC FEEDBACK PACKS
LEDs provide feedback to indicate whether the battery pack is charging, fully charged, defective, or too hot or cold to charge.
ENERGY SAVE MODE
Energy Save Mode allows the charger to conserve energy by charging batteries only as needed, and also protects the cells and maximizes the life of your batteries.
KEY HOLE HANGER
The charger has a key hole hanging feature for convenient, space saving storage. Screws should be installed so that the center distance is 2-3/8 in.
A
B
Figure 1 A - Battery port
B - Grooves (rainures, ranuras) C - 2-3/8 in. distance D - Key hole hanger
D
C
2-3/8 in.
(60 mm [2-3/8 po],
60 mm [2-3/8 pulg.])
6 ProTeam
OPERATION
WARNING:
Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the following purposes:
• Charging 18 V ProTeam Lithium-ion battery packs
CAUTION:
If at any point during the charging process none of the LEDs are lit, remove the battery pack from the charger to avoid damaging the product. DO NOT insert another battery. Contact ProTeam Customer Service to return the charger and battery for service or replacement.
NOTICE:
Charge in a well ventilated area. Do not block charger vents. Keep them clear to allow proper ventilation.
!
!
!
!
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
• Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
WARNING: Do not use this
product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury.
• Inspect the product carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
• If any parts are damaged or missing, please call 1-866-888-2168 for assistance.
PACKING LIST
Charger Operator’s Manual
WARNING: Do not attempt
to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
!
!
OPERATION (continued)
ProTeam 7
CHARGING
See Figure 2 Battery packs are shipped in a low charge
condition to prevent possible problems. Therefore, you should charge them before first use. If the charger does not charge your battery pack under normal circumstances, contact ProTeam Customer Service.
Charge time is dependent upon the type of battery pack and the existing level of charge.
• Make sure the power supply is normal household voltage, 120 volts, AC only, 60 Hz.
• Connect the charger to a power supply.
• Attach the battery pack to the charger by aligning the raised ribs on the battery pack with the grooves in the charger, then slide the battery pack onto the charger.
• Press down on the battery pack to be sure contacts on the battery pack engage properly with contacts in the charger.
• Do not place the charger in an area of extreme heat or cold. It will work best at normal room temperature.
• The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem.
• After charging is complete, the green LEDs will remain on while the charger is in Maintenance mode.
• After completing Maintenance mode, the green LEDs will begin fading on/off continuously. This indicates the battery is fully charged and the charger is in Energy Save mode.
• Charger will periodically wake from Energy Save mode to ensure the battery pack remains in a fully charged state.
• To remove the battery pack from the charger, pull up on the battery pack.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become hot. A hot battery pack may be placed directly onto the charger port but charging will not begin until the battery temperature cools to within acceptable temperature range. When the battery pack cools, the charger will automatically begin charging.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger port but charging will not begin until the battery temperature warms to within acceptable temperature range. When the battery pack warms, the charger will automatically begin charging.
Figure 2
8 ProTeam
CHARGE STATUS LEDS
See Figure 3.
MODE
?
GREEN
LED
GREEN
LED
ORANGE
LED
ORANGE
LED
RED LED
Power
Charger is connected to power source. Ready to charge battery pack.
On /
Fading
Evaluate
Preparing battery pack for charging.
On Flash
Charging
Restoring energy to battery pack.
On Flash
Charged
Fast charging is complete. Charger enters maintenance charge mode.
On On
Standby / Charged
Battery pack is fully charged and char­ger is in Energy Save mode.
Fade Fade
Temperature
The battery pack is either too hot or cold to accept a charge. When the battery pack reaches a proper tempera­ture, charging will resume.
Fade Fade
Defective
Battery pack or charger is defective.
Fade Fade
OPERATION (continued)
A
B
C
D
E
Figure 3 A - Power LED
B - Charging LED C - Evaluate LED D - Temperature LED E - Defective LED
ProTeam 9
WARNING: When servicing, use only identical ProTeam replacement parts.
Use of any other parts may create a hazard or cause product damage.
WARNING: To avoid serious personal injury, always remove the battery
pack from the tool when cleaning or performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
STORAGE
Always remove the battery pack before storing the charger or any time the charger is unplugged.
WARNING: Do not let brake fluids, gasoline, petroleum-based products,
penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which can result in serious personal injury.
MAINTENANCE
!
!
!
10 ProTeam
BATTERY AND CHARGER
3
2
1
4
Battery Charger / Battery Parts List
Part # Description Qty. 1 107490 Battery Charger 1 each 2 107200 Battery 1 each 3 SP6773 Battery Owner’s Manual 1 each 4 SP6971 Battery Charger Owner’s Manual 1 each
ProTeam 11
WARRANTY
1-YEAR LIMITED SERVICE WARRANTY
Proof of purchase must be presented when requesting warranty service.
90-DAY SATISFACTION GUARANTEE POLICY
During the first 90 days after the date of purchase, if you are dissatisfied with the performance of this ProTeam appliance for any reason you may return the appliance to the dealer from which it was purchased for a full refund or exchange. To receive a replacement appliance, you must present proof of purchase and return all original equipment packaged with the original product. The replacement appliance will be covered by the limited warranty for the balance of the 3-YEAR service warranty period.
WHAT IS COVERED UNDER THE 1-YEAR LIMITED SERVICE WARRANTY
This warranty on ProTeam appliance covers all defects in workmanship or materials and normal wear items such as cords and batteries in the ProTeam appliance for one year following the purchase date of the appliance. Warranties for other ProTeam products may vary.
HOW TO OBTAIN SERVICE
To obtain service for this ProTeam appliance, you must return it: freight prepaid, or take it in to an authorized service center for ProTeam branded vacuums. You may obtain the location of the authorized service center nearest you by calling (toll-free)
866.888.2168. or by logging onto the ProTeam website at www.pro-team.com. When requesting warranty service, you must present the original dated sales receipt. The authorized service center will repair any faulty workmanship, and either repair or replace any part covered under the warranty, at our option, at no charge to you.
WHAT IS NOT COVERED
This warranty applies only to the original purchaser at retail and may not be transferred. This warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defect resulting from misuse, abuse, neglect, alteration, modification or repair by other than an authorized service center for ProTeam tools. Consumable accessories provided with the tool are not covered.
ProTeam makes no warranties, representations or promises as to the quality or performance of its appliance other than those specifically stated in this warranty.
ADDITIONAL LIMITATIONS
To the extent permitted by applicable law, all implied warranties, including warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, are disclaimed. Any implied warranties, including warranties of merchantability or fitness for a particular purpose, that cannot be disclaimed under state law are limited to three years from the date of purchase. ProTeam is not responsible for direct, indirect, incidental or consequential damages. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Loading...
+ 25 hidden pages