ProScan PLT8031 Operating Instructions

User Manual

Important Information：

This manual includes security measures and proper operating methods. For personal safety, please make sure to read this

0

User Manual

manual before using. Thank you!

The machine adopts capacitive touch screen, you can just touch it by finger or click with capacitive pen for operation. (Never use

the sharp objects to click the screen, or the touch screen may be damaged).

Do not put the device at any high temperature, high humidity or dusty place.
Do not drop or crash the device, avoid violent impacting between the d is play and the capacitive touch screen.
Please choose the suit abl e v olume and avoid turning it too loud. If you feel uncomfortable, ple ase turn down the volume or stop to

use the device soon.

Please charge if you meet those situations as below:

A、Low battery on the battery icon. B、The system turns off automatically.
C、The keys do not work. D、“ ” is battery charging.
【Note】:Don’t use the different type charger or it may make the device burned . We assume no liability for the damage.

Please contact with local agent if you need the original adaptor.

In the charging process，the device may be warming up a little (not too hot), this is normal, and it won’t effect the functions.

Do not disconnect the device while formatting, downloading or uploading, or it may make the error.

Our company won’t bear the duty for the loss of the memory erasing on account of the damage, repair or some other reason.

Please operate the device according to the user manual correctly and backup the important data in time.

Do not dismantle this device by yourself, and do not polish it with alcohol, dilution, or benzene.
Do not use this device where electronics is forbidden, such as on the airplane.
Do not use this device while walking or driving, in order to avoid traffic accident.
USB is for transferring data but also for charging.
Virus can damage this device. So please use proper computer antivirus and keep it updated.

Android system will occupy space of NAND Flash, it occupies space in “Total space/Available space”, Apps installatio n is

defaulted to store here. In case lack of space, it is recommended user to install Apps in the Mini SD(Excluded).
If multiple programs are running simultaneously, the system becomes slow, hence, please close down some of the RUNNING

Apps, in the SettingsApps.

For any support needed for this device please contact the company or the authorized distrib utor. Any unauthoriz ed dismantling of

the device will make the warranty null and void.

We reserve the right to keep the change of the products, the specification and design is subject to change without notice!

1

User Manual

Packing List: ：

Please check box for the following items
1,Device
2,User Manual
3,Product Warranty
4,Power Adaptor
5,USB Cable

Other accessories can be purchased at local Proscan retailers
The accessories may not be compatible with other devices

Power Adaptor Specification:
MODEL:HNC050200U
INPUT:AC 100-240V 50/60Hz 0.35A MAX
OUTPUT: 5.0V

2.0A

2

User Manual

Device Description

① Touch screen: You can click and drag in the touch screen .

★② Camera: 2.0 mega pixels, you can take photos and videos etc

③ MENU: To display the operation menu when it is on.

④ HOME: Press the display screen key to return to main screen.

⑤ BACK: Return to the previous page.

⑥ Mini HDMI: Mini HDMI output.

⑦ TF card : TF card slot.

⑧ ：Mini USB, MINI-5PIN connector.

⑨ ：Earphone jack: 3.5mm standard earphone jack.

⑩

DC jack: Connect the power cable to charge to the device.

⑪ MIC: microphone and voice recording

⑫ Vol ume+ ：turn up the volume
⑬ Volume-：turn down the volume

⑭POWER: Turn on/off the device by long pressing this button.

-- Power on: When the power indicator is on, press it, device

3

User Manual

will turn on till the turning-on picture is over.

-- Power off: Press it for 5 seconds. The system would indicate
some options : Muting or Power off. Click “Power off” to shut it down.

【TIPS 】:

1.When the battery is low, it will power off automatically.

2.Shutdown illegally , when you rest art, device would scan and repair the disk. The screen will stay at the progress bar for a long time.

3.Definition of “Press”:
Short Press: Press the button less than 2 seconds.
Long Press: Press the button more than 3 seconds. If there is no special explain, “Press” means Short Press.

Setting up for the first time

Charging your device:

For first-time use, you need to charge the device for ten hours.
After that you can recharge the device as needed.
Connect the DC-in jack to your device and plug the AC adapter into any AC outlet.
【TIPS】:

1. This device adopts built-in polymer battery. Only the specified charger should be used.

2. It is normal for the device’s surface to become warm during charging or long
time of use. All devices are factor y tested before release.

3. If you do not use this set for a long time, please charge/release it once
a month to avoid deep discharge. The damage caused by battery over-consuming is not
included in the warranty.

4

User Manual

Connecting to a PC:

• You can connect with PC by USB cable attached with the device.

You can transfer your personal data to the PC.

• Connect the PC and the device, it will change to the USB mode,

in this state, realize the files transfer function between the PC and the

device.

Connecting a USB device:

• USB devices are supported, such as a keyboard, through the USB port.

• View media files on USB storage with installed photo, music or video applications.

【Caution】: Before removing this USB storage,

make sure your device is not accessing data from the USB storage.

Inserting the micro SD card (excluded ):
You may install a m icro SD card to expand your device’s storage space.

1. Turn off the device by pressing and holding the power button.

2. Insert the micro SD card as shown.

5

User Manual

【Note】: Ensure that the micro SD card is inserted all the way into the card slot.
【Caution】: Before removing this card,

make sure your device is not accessing data on the card.

Connecting to a television with HDMI ( HDMI cable excluded):
Connect a micro HDMI cable to your device then plug the other end of the HDMI connector into
a TV or monitor with an HDMI port.

Resetting the device:
You may have to perform a reset if your device fails to respond w hen buttons are pressed
or the screen is tapped or it does not respond to screen input.
To reset your device, use a small thin object (such as a paperclip) to press the
recessed reset button.

6

User Manual

Connecting to the Network:

1. Wi-Fi wireless setup:

Enter the setting interface, and turn on the Wi-Fi item.
The device will automatically search any accessible nearby wireless networks.

Commonly used settings

Press the setup icon to enter the setting.
 Wi-Fi: Click ON or OFF to open or close Wi-Fi.
When open Wi-Fi，the system will scan the wifi signal around automatically.
Meanwhile, users could add network manually as well.

7