ProScan 26LA30Q, 32LA30Q Instruction Manual

P RO

C

Model:
Model:

26LA30Q
32LA30Q

.........

INS UC TION MAN L

CAUTION: To reduce the risk of electric shock,

do not remove cover or back.
No user- serviceable parts inside.

Refer ServTcing to qualified service
personnel.

CAUTION:

Changes or modifications not
expressly approved by the party
responsible for compliance with the
FCC Rules could avoid the users'

authority to operate this equipment.

CAUTION:

The monitor shall not be exposed to
dripping or splashing. No objects
filled with liquids, such as vases, shall
be placed on the Monitor

CAUTION: Do Not Place This TV on an

Unstable cart, stand, or table. The
TV may fall, causing serious injury
to a child or adult, and serious damage
to the TV. Use only with a cart or stand
recommended by the manufacturer, or
sold with the TV

CAUTION: Installation on concrete wall has passed

UL safety test.

WARNING: TO REDUCE THE RISK OF FIRE OF ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAiN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT

INSIDE THE ENCLOSURE.DO NOT OPEN THE CABINET. REFER SERVICING TO
QUALIFIED PERSONNEL ONLY.

WARNING: THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR

SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES SHALL BE PLACED ON THE APPARATUS.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT.

CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE

PERSONNELONLY.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT PERFORM ANY SERVICING

ACTIVITIES, BUT CALL QUALIFIED ELECTRICIAN PERSONNEL.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED, PERLACE ONLY

WITH THE SAME OF EQUIVALENT TYPE

1
2
3
4

5

READ THESE iNSTRUCTiONS
KEEP THESE iNSTRUCTiONS
HEED ALL WARNINGS
FOLLOW ALL iNSTRUCTiONS
DO NOT USE THiS APPARATUS NEAR

WATER
Do not use this TV near water. For example, do not use near
a bathtub, washbowl, kitchen sink or laundry tub, in a wet

basement, or near a swimming pool, and the like. The TV set
shall not be exposed to dripping or splashing. No objects
filled with liquids, such as vases, shah be placed on the TV

set.

6. CLEAN ONLY WITH DRY CLOTH

7.

Unplug the TV from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.

DO NOT BLOCK ANY VENTiLATiON OPENINGS.
iNSTALL iN ACCORDANCE WiTH THE
MANUFACTURER'S iNSTRUCTiONS.

Slots and openings in the cabinet back or bottom are
provided for ventilation, to ensure reliable operation of the TV
and to protect itfrom overheating. These openings must not
be blocked or covered. The openings should never be
blocked by placing the TV on a bed, sofa, rug, or other
similar surface. This TV should never be placed near or over
a radiator or heat resource. This TV should not be placed in a
built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's instructions

have been adhered to.

8. DO NOT iNSTALL NEAR ANY HEAT SOURCES SUCH AS
RADIATORS, HEAT REGISTERS, STOVES, OR OTHER
APPARATUS (iNCLUDE AMPLiFiERS) THAT PRODUCE

HEAT.

9. DO NOT DEFEAT THE SAFETY PURPOSE OF THE
GROUNDING-TYPE PLUG. A GROUNDING TYPE PLUG
HAS TWO BLADES AND A THIRD GROUNDING PRONG.
THE THIRD PRONG iS PROVIDED FOR YOUR SAFETY.
iF THE PROVIDED PLUG DOES NOT FiT iNTO YOUR
OUTLET, CONSULT AN ELECTRiCiAN FOR
REPLACEMENT OF THE OBSOLETE OUTLET.

10. PROTECT THE POWER CORD FROM BEING WALKED

11.

12.

ON OR PINCHED PARTICULARLY AT PLUGS,

CONVENIENCE RECEPTACLES, AND THE POINT

WHERE THEY EXiT FROM THE APPARATUS.
ONLY USE ATTACHMENTS/ACCESSORIES SPECiFiED

BY THE MANUFACTURER.

USE ONLY WiTH CART, STAND, TRIPOD, BRACKET, OR
TABLE SPECiFiED BY THE MANUFACTURER, OR SOLD
WiTH THE APPARATUS. WHEN A CART iS USED, USE

CAUTION WHEN MOVING THE CART/

APPARATUS COMBiNATiON TO AVOID

iNJURY FROM TIP-OVER.
Do not place this TV on an unstable cart, stand, tripod,
bracket, or table. The TV may fail, causing serious injury to

someone, and serious damage to the appliance. A TV and
cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the TV and

cart combination to overturn.

13. UNPLUG THiS APPARATUS DURING LiGHTNiNG
STORMS OR WHEN UNUSED FOR LONG PERIODS
OF TIME.

For added Protection for this TV receiver during a lightning
storm, or when it is left unattended and unused for long
period of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the
TV due to Lightning and power line surges.

14. REFER ALL SERViCiNG TO QUALiFiED SERVICE

PERSONNEL. SERViCiNG IS REQUIRED WHEN THE

APPARATUS HAS BEEN DAMAGED IN ANY WAY, SUCH
AS POWER-SUPPLY CORD OR PLUG IS DAMAGED,

LIQUID HAS BEEN SPILLED OR OBJECTS HAVE
FALLEN INTO THE APPARATUS, THE APPARATUS HAS
BEEN EXPOSED TO RAIN OR MOISTURE, DOES NOT

OPERATE NORMALLY, OR HAS BEEN DROPPED.

15. Wet Location Marking -CANADA

Worded: The TV shall not be exposed to dripping or splashing.

No objects filled with liquids, such as vases, shall
be placed on the TV.

Note: All figures in the manual are for reference only, please

refer to the actual units to determine their
appearance.

The front of the display panel has been
specially treated. Wipe the panel surface gently
using only a cleaning cloth or a soft, lint-free
cloth.

If the surface is particularly dirty, soak a soft, lint-free
cloth in a weak detergent solution and then remove
excess liquid. Use this cloth to wipe the surface of
the display panel, and then wipe it with a dry cloth,

of the same type, until the surface is dry.

Do not scratch or hit the surface of the panel with
fingernails or other hard objects. Furthermore, avoid
contact with volatile substances such as insect

sprays, solvents and thinner; otherwise, the quality
of the surface may be adversely affected.

Welcome to the bright and vivid world of Proscan TV set. We hope that you will have many years of
enjoyment from your new select.
To obtain maximum benefit from your set. Please read this manual before making any adjustments and
retain them together with purchase receipt for future reference,

Product Registration

Please fillout _he aroduct registration card and return it immediately. Returning the card allows usto contact
you ]f needed. Keep your sales receipt to obtain warranty parts and service and for aroof of aurchase. Attach
it here and record the seria and model r umbers in case Vou need them. The numbers are located on the

r_acKof the television.

Model No.
Serial No,

PurchaseDate.'
DealeriAddressiPho he:

Please read all the safety and operating instructions carefully before begin.

CAUTION AND WARNING ............................................................................. 1

IMPORTANT SAFTY INSTRUCTIONS .............................................................. 3

CLEANING AND MAINTENANCE ................................................................... 4

DEAR PROSCAN CUSTOMER ....................................................................... 4

SAFETY PRECAUTIONS ............................................................................... 7

Set up........................................................................................................................................... 7

AC Power Supply Cord .................................................................................................................... 7

If Problems Occur During Use ........................................................................................................... 7

When using the TV set ..................................................................................................................... 8

INSTALLATION ............................................................................................ 8

Selecting a location for the TV ............................................................................................................ 8

Optional External Equipment ............................................................................................................. 8

FRONT PANEL ........................................................................................... 9

REAR PANEL ............................................................................................. 10

LEARNING ABOUT REMOTE CONTROL ........................................................ 11

REMOTE CONTROL INSTRUCTIONS .............................................................. 13

CONNECTIONS AND EXTERNAL INPUT SETTINGS ......................................... 14

TURNING ON AND OFF THE TV .................................................................... 15

TURN ON LCD TV .......................................................................................................................... 15

TURN OFF LCD TV ......................................................................................................................... 15

SELECT ON SCREEN LANGUAGE ................................................................ 15

VOLUME ADJUSTMENT. ............................................................................................. 15

ADJUST THE OSD SCREEN ......................................................................... 16

CHOOSING TV CHANNEL ............................................................................ 16

SELECTING INPUT SOURCE ........................................................................ 17

PICTURE MENU OPTIONS ........................................................................... 17

Picture Mode ................................................................................................................................. 17

Contrast ........................................................................................................................................ 18

Brightness ..................................................................................................................................... 18

Sharpness ..................................................................................................................................... 18

Color ............................................................................................................................................ 18

Tint ............................................................................................................................................... 18

Aspect Ratio .................................................................................................................................. 18

AUDIO MENU OPTIONS ............................................................................... 18

Audio Mode ................................................................................................................................. 18

Audio Language .......................................................................................................................... 19

Bass ........................................................................................................................................... 19

Treble ......................................................................................................................................... 19

Balance ....................................................................................................................................... 19

Digital Audio Output ..................................................................................................................... 19

Auto Volume Adjust ...................................................................................................................... 19

SETUP MENU OPTIONS ............................................................................... 19

Tuning Band ................................................................................................................................... 19

5

DTV-Signal ..................................................................................................................................... 19

Auto Ch Search ................................................................................................................................ 20

Add On Ch Search ........................................................................................................................... 20

Manual Ch Set ................................................................................................................................ 20

Channel Labels ............................................................................................................................... 20

Manual Language ........................................................................................................................... 20

Reset .......................................................................................................................................... 21

FEATURE MENU OPTIONS ........................................................................... 21

Time Set ....................................................................................................................................... 21

Time Set Mode .............................................................................................................................. 21

Time Zone ..................................................................................................................................... 21

Advance Video Menu ....................................................................................................................... 21

Password Set ................................................................................................................................. 22

Parental Control ............................................................................................................................. 22

US Ratings .................................................................................................................................... 22

MAPP ........................................................................................................................................... 23

TV Rating ...................................................................................................................................... 23

Advanced Parental Lock ................................................................................................................... 23

Canadian English ............................................................................................................................ 24

Canadian French ............................................................................................................................ 24

Digital Closed Captions ................................................................................................................... 24

VGA MENU OPTIONS .................................................................................. 25

VGA Set ........................................................................................................................................ 25

H-Pos ........................................................................................................................................... 25

V-Pos ........................................................................................................................................... 26

Phase .......................................................................................................................................... 26

Clock ........................................................................................................................................... 26

Auto Adjust .................................................................................................................................... 26

Setting .......................................................................................................................................... 26

YPBPR MENU OPTIONS .............................................................................. 26

Component Set ........................................................................................................................... 26

HDMI MENU OPTIONS ................................................................................. 27

Time Set ....................................................................................................................................... 27

Sleep timer .................................................................................................................................... 27

Advance Video Menu ....................................................................................................................... 27

APPENDIX-TROUBLE SHOOTING ................................................................. 27

Setup and Connection ..................................................................................................................... 28

Menu and Remote Control ............................................................................................................. 28

Screen ......................................................................................................................................... 28

Sound ........................................................................................................................................... 29

Channel ........................................................................................................................................ 29

Monitor ......................................................................................................................................... 29

,_WARNING

KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF
SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY SWALLOWED. ALSO,

BE CAREFUL ABOUT PACKAGING MATERIALS AND PLASTIC SHEETS.

Set up

Do not place the TV set on sloped or unstable surfaces.

Do not place any objects on top of the TV set. If water spills onto the TV set or foreign objects get inside it,
short-circuiting may occur which could result in fire or electric shock. If any foreign objects get inside the TV set,
please consult an Authorized Service Center.

Do not cover the ventilation holes. Doing so may cause the TV set overheated and can cause fire or damage to the
TV set.

Avoid installing this product near electronic equipment that is readily affected by electromagnetic waves.
It may cause interference in image, sound, etc. In particular, keep video equipment away from this
product.

AC Power Supply Cord

Securely insert the power cord plug as far as it will go. If the plug is not fully inserted, heat may be generated which
could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used.
Do not handle the power cord plug with wet hands. Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the
cable.

Do not make any modifications to, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull
the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage
to the cable is suspected, have it repaired at an Authorized Service Center.

If the TV set will not be used for a long period of time, unplug the power cord from the wall outlet.

If Problems Occur During Use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the TV set,
unplug the power cord immediately. Continued use of the TV under these conditions might cause fire or permanent
damage to the unit. Have the TV evaluated at an Authorized Service Center. Service to the TV by any unauthorized
personnel is strongly discouraged due to its high voltage dangerous nature. If water or foreign objects get inside the
TV set, if the TV set is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately.
Contact an Authorized Service Center for any repairs that need to be made

When using the TV set

Do not bring your hands, face or objects close to the ventilation holes of the TV set. Top of the TV set is usually
very hot due to the high temperature of exhaust air being released through the Ventilation holes. Burns or personal
injuries can happen if any body parts are brought too close. Placing any object near the top of the TV could also
result in heat damage to the object as well as to the TV if its ventilation holes are blocked.
Be sure to disconnect all cables before moving the TV set. Moving the TV with its cables attached might damage
the cables which, in turn, can cause fire or electric shock.

Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
electric shocks can result if this is not done.

Clean the power cable regularly to prevent it from becoming dusty. Built-up dust on the power cord plug can
increase humidity which might damage the insulation and cause fire. Unplug the cord from the wall outlet and
clean it with a dry cloth.

This TV set radiates infrared rays; therefore, it may affect other infrared communication equipment. Install your
infrared sensor in a place away from direct or reflected light from your TV set.

Selecting a location for the TV

1 Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.
2 Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause
overheating, which may damage the TV.

Note: Please contact local dealer for wall mounting.

Optional External Equipment

For best performance, video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your
dealer or electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various
components require. Also determine the length of cable you will need.

Familiarizing Yourself with the Main Hardware

(The picture of the product may vary depending on the model)

a.

b.

C.

d.

e.

f.
g.

Select signal input. (It changes to "ENTER" function when main menu displays )
Main Menu display and menu selection

Channel down
Channel up

Volume down
Volume up

ON/OFF button

Rear panel

(The picture of the product may vary depending on the model)

A. 100-240V AC 50/60Hz Power Input Terminal.
B. Ypbprl right channel input Terminal.
C. Ypbpr2 right channel input Terminal.
D. Video right channel input Terminal.
E. Y2 video-com input Terminal
F. Pb2 video-com input Terminal.
G. Pr2 video-com input Terminal.
H. Audio Input Terminal.
I. Connect with computer VGA signal input

terminal.
J. HDMI-1 video-com input Terminal
K. HDMI-2 video-com input Terminal

L. CVBS Input Terminal
M. S-Video-com Input Terminal.
N. COAX -DigitalAudio Out

O. Connect with antenna or cable TV to watch TV

programs
B1. Ypbprl left channel input Terminal
C1. Ypbpr2 left channel input Terminal
D1. Video left channel input Terminal
El. Y1 video-com input Terminal
F1. Pbl video-com input Terminal
G1. Prl video-com input Terminal

I0

1. POWER
Poweron/off

2. SLEEP
PresstoselectapresettimeintervaltoautomaticallyshuttheTV

3. ASPECT
Presstoadjustthescreensize.

4. DISPLAY
PresstoCheckyourcurrentmode.

5. INPUT
PresstoDisplayamenuofallavailableinputsources,Alsousedto

confirmyourchoiceintheon-screenmenu.

6. MTS
Presstoselectyourfavoritelanguagefordigitalbroadcasting;you

canselectyourfavoritemodeMono/Stereo/SAP

7. FAV.

Add/deletethecurrentchanneltoyourfavoritechannel.

8. FAV.+
Presstoviewthenextfavoritechannel

9. FAV.-
Presstoviewthepreviousfavoritechannel

10.NumericButtons
Presstochangethechanneldirectlyusingthenumericbuttons.

11.RECALL

Presstoselectbetweencurrentchannelandthelastchannel.

12.
Whenselectingadigitalbroadcastchannel,pressthenumber,

followedby"-"button,followedbysubchannelnumber.

13.Volume
Presstoincreaseordecreasethevolume.

14. Channel
Presstoselectnextorpreviousactivechannel

15. PICTURE
Presstochangetoapreset3icturemode.

16. SOUND
Presstochangetoapresetsoundmode.

17. FREEZE
Presstofreezethecurrentpicture.

18. MUTE
Presstotemporarilyswitchthesoundoff.

]]

19.EPG

OneofsignalchannelEPGorMultichannelEPG

20.DTV
PresstochangebetweenAnalogTVandDigitalTV

21.CC
PresstoselectCaption

22.MENU
Presstodisplaythemainon-screenmenu.

23.UP/DOWN/LEFT/RIGHT
Presstoselecton-screenmenuitemsandchangemenuvalues.

24.ENTER
Presstoenterthemenu.

12

<Insertingthebatteriesintotheremotecontrol>1.Push the back of the remote control and pull forward slightly.2.tnsert two

AAA 1.5V batteries ensuring the correct polarity (+/-).3.Close the lid.

inserting the batteries

Caution: Use only Alkaline Batteries.

O If the remote control is not working, see the checkpoints below.

O Are the polarities of the batteries (+, -) correct?

• Are the batteries worn out?

• Is there an AC power failure?

O Is the power cable plugged in?

O Is any special fluorescent or neon sign board turned on?

< Remote Control Reception Angle>
Use the Remote control within a range of 7~10m and at an angle of 30°

to either side of the receiver.

Remote Control TV Angle

Caution-Used batteries should be recycled and kept out of children's reach.-Do NOT use new and old batteries together.

Change both batteries at the same time.

-When not using the remote control over a long time, remove the batteries from the unit. Use only Alkaline batteries.

13

1: Checking Items before Connecting

Please check the list below before connecting the product to other devices.
< Check items before connecting. >
Check the instruction manual when connecting external devices. External products sometimes have different buttons and
locations.

1 Do not connect the power unless every connection is well connected. The product may be damaged if turned

on while still in the process of being connected.
2 Connect the left (white) and right (red) cables correctly to the sound cable.
3 Check the terminals to connect the product to on the rear panel.

2: Connecting an Antenna

There are internal and external types of antenna.
< Connecting an Antenna>

The rear of LCOTV

Cable TV network

1 Use a coaxial cable to connect the rear panel of the TV's [AIR] or [CABLE] terminals and the wall mount or external

antenna.
2 When an Air signal is required, connect to the [AIR] terminal. If a Cable signal is required, connect to the

[CABLE] terminal. If both Air and Cable are available, and then connect both [AIR] and [CABLE] terminals.
3 Connect the TV power cord when connecting everything else.

< Caution >

Avoid bending the copper tip at the center of the coaxial cable.

]4

TURN ON LCD TV

1. Connecting to the AC input cable to switch on LCDTV.At this time the TV will enter standby mode and indicator show
red.

2. User POWER button or button on the remote control can turn on LCD TV from standby mode.

TURN OFF LCD TV

1. Press POWER button or button on the remote control to enter standby mode. The indicator is red.

2. Wait 5 second after switch off LCD TV then you can turn on LCD TV again.

NOTE: If you use your LCD TV for the first time, you should select the language which will be used
for displaying menus and indications

• Press MENU to display the main menu.

• Press • / v repeatedly to select the SETUP MENU.

• Use ,t / _ and • / v to select MENU LANGUAGE.

• Press ENTER button to select your desired language.

1. Press VOL+/- to adjust the volume.

2. If you want to switch the sound OFF, press the MUTE, will turn on CC display at the same time.

3. You can cancel this function by pressing MUTE or VOL+

]5

Press the MENU button to display the main menu.
Use < / b. / A / v buttons to select and adjust the available menus.

T

Seil}

1

NOTE: The OSD (On Screen Display) function enables you to adjust the screen status conveniently
since it provides graphical presentation.

1.

2.

3.

Using the CH A / CH v on the front panel or on the remote control.

• Press CH A to increase channel number.

• Press CH v to decrease channel number.

Using 0-9 digital buttons and - button

You can select the channel number by pressing 0 to 9

Example:

IN ANALOG SIGNAL:

To select channel (e.g. Channel 22): Press 2 -> 2 ->ENTER,It will jump to 22-0 directly

IN DIGITAL SIGNAL:

To select digit channel (e.g. Channel 22-1 ): Press 2 -> 2 -> - > 1 ->ENTER,the program will appear immediately
NOTE: Sub channel number of analog channel is always zero. But when you in the digital signal, if you enter
physical channel number and not end with "ENTER", channel selection will be made if there is no operation within

a few seconds.

]6

You can select the input source by pressing the INPUT on the remote control or on the front panel.

i'

NOTE: In this manual, the OSD (On Screen Display) may be different from your TV's in colors.

Press the MENU on the front panel or on the remote control and then use A / v to select the PICTURE menu.

l. Use ,L / v to select what you want to adjust inthe PICTURE MODE.

2. Press ENTER button to adjust.

3. When you are satisfied with your adjustment. Press MENU to exit the main menu.

Picture Mode

Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE menu.

You may select the picture mode directly by pressing the PICTURE button on the remote control.

]7

Contrast
Press ENTER button to select it and then use ,q / _. to adjust the contrast of picture.

Brightness
Press ENTER button to select it and then use ,q / _. to adjust the brightness of picture.

Sharpness
Press ENTER button to select it and then use ,q / _. to adjust the sharpness level of picture.

Color
Press ENTER button to select it and then use ,q / _. to adjust the color saturation

Tint ( NTSC Input only)

Press ENTER button to select it and then use ,q / _. to adjust the tint of picture

Aspect Ratio

Press ENTER button to select the ratio of picture display such as Normal/Zoom/Wide and Cinema.

Press MENU on the front panel or on the remote control and then use A • to select the AUDIO menu.

1.

2.

3.

Use A / • to select what you want to adjust in the AUDIO menu.
Press ENTER button to select it and then use ,4 / D,to adjust
When you are satisfied with your adjustment, press MENU to exit the mare menu.

Audio Mode
You can select the type of sound which best corresponds to your listening requirements by selecting sound in SOUND menu.

You may select the sound mode directly by pressing the SOUND button on the remote control.

]8

Audio Language

Press ENTER to one of the audio language such as English/French and Spain, but the condition is that the program system
has included the language code.

Bass
Press ENTER button to select it and then use ql / i_ to increase or decrease the level of the lower-pitched sounds

Treble

Press ENTER button to select it and then use ,i. / _, to increase or decrease the level of the higher-pitched sounds.

Balance
Press ENTER button to select it and then use ,i. / _ to adjust the audio output between left and right speakers.

Digital Audio Output
Press ENTER button to select the one of mode of the digital audio output such as PCM and RCW.

Auto Volume Adjust
Press ENTER button to adjust the volume automatically.(TV and HDMI input only)

Press MENU on the front panel or on the remote control and then use A / v to select the SETUP menu.

1. Use A / v to select what you want to adjust in the SETUP menu.

2. Press ENTER button to select it and then use ,q. / _ to adjust

3. When you are satisfied with your adjustment, press MENU to exit the main menu.

Tuning Band
Press ENTER button to select Air, Cable, Cable HRC, Cable IRC or Cable Auto.

DTV-Signal
In DTV mode, you can tune manually and adjust the angle. Orientation of the antenna etc.

]9

Auto Ch Search
Press ,L / v to move the cursor to the item to be selected (item selected highlighted in yellow). Press ENTER key to enter

your selection and scan. After the scan is finished, the following menu will display. The channels found the automatically
saved as below:

Note: If you want you exit the Auto Ch Search during the Auto search process, press MENU twice to exit.

Add On Ch Search
When the channels are found, use ENTER to add it to the cannel list

Manual Ch Set

Press ENTER button to display a channel list that you can select channel as below:

Channel Labels

Allows you to name the channel that is selected. Use ,k / • to move and use .4 / _, to change.

Manual Language
To select language of the OSD such as English/French and Spain.

20

Reset
Press ENTER to return to the factory setting.

Press MENU on the front panel or on the remote control and then use ,q / =. to select the FEATURE menu

1. Use ,= / v to select what you want to adjust in the FEATURE menu.

2. Press ENTER button to select it and then use ,t. / _ to adjust

3. When you are satisfied with your adjustment, press MENU to exit the main menu.

Time Set
Press ENTER button to select it and then use <. / =, to select the amount of time before your TV turn off automatically and
press the ENTER that can select the 30min/60min/90min and OFF.

Time Set Mode
You can select one of auto and manual to set the time. When selected auto, the item of year/date and time will be disabled
and can not to adjust. When select the manual mode, you can press A / • / ,t. / _ to set the corresponding functions.

Time Zone
Press ENTER button to select it and then use ,t. / _ to select the time zone such as Pacific/Alaska/Hawaii/Eastern/
Central/Mountain

Advance Video Menu

Press ENTER to enter the advance video menu as below

2]

Noise Reduction- Spatial: press _ / _, to select on or off.
Noise Reduction -Speaker :press ,q / D, to select on or off.
Noise Reduction-Temporal: press ,4 / D, to select on or off.
Auto Contrast Enhancement: press _ / _, to select on or off.
Color Temperature: press _ / _, to select one of Normal/Cool and Warm.
3D Y/C: press ,4 / _, to select on or off.

Password Set
Press the ENTER to enter old password menu, and then input the number of 0-9 as below, and you can change the password
when you input the new on twice.

Parental Control
Press ENTER to enter the sub-menu and then uses the 0-9 to enter the correct password and the Parental Control Menu will
display.

US Ratings
Press ENTER to enter the Parental Control Menu as below

22

MAPP

Press ENTER to lock or unlock one of None/G/PG/PG-13/R/NC-17 and X
None - No restrictions
G - General Audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations.
PG - Children under 13 should be accompanied by an adult.
PG-13 - Parental guidance suggested. Children under 13 should be accompanied by an adult.

R - Restricted. Viewers should be 17 or older.
NC-17 - not classified. Viewers should be 17 or older.

TV Rating

Press ENTER to lock or unlock one of TV-MA/TV-14/TV-PG/TV-G/TV-Y7 and TV-Y.
TV-MA- Mature audiences only. This program may contain mature themes, profane language, graphic violence and explicit

and explicit sexual content.
TV-14 - Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and

more intense violence.
TV-PG - Parents guidance suggested. The program may contain infrequent coarse language, limited violence, some
suggestive sexual dialog and situations.

TV-G - General audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations.
TV-V7 - Directed for older children. Themes and elements in this program may include mild physical or comedic violence, or
may frighten children under the age of seven.
TV-Y - All children. The themes and elements in this program are specifically designed for a very young audience, including
children from ages two six.

Advanced Parental Lock
When select the ON for Advance Rating, the Advanced Parental Lock will display.

23

Canadian English
Press ENTER to lock or unlock one of E/C/C8+/G/PG/14+/18+.

E - Expect No restriction.
C - Children
C8+ - Viewers should be 8 or order.
G - General Audience.

PG - Parental guidance suggested.
14+ - Restricted. Viewers should be 14 or older.

18+ - Restricted. Viewers should be 18 or older.

Canadian French
Press ENTER to lock or unlock one of E/G/8 ans+/13 ans+/16 ans+ and 18 ans+.

E - Expect No restriction.
G - For all.

8 ans+ - Restricted. Viewers should be 8 or older.
13 ans+ - Restricted. Viewers should be 13 or older.
16 ans+ - Restricted. Viewers should be 16 or older.
18 ans+ - Restricted. Viewers should be 18 or older.

Digital Closed Captions
This menu allows you to set the closed caption, and press ENTER to enter Closed Caption Options menu as below:

24

Style: press _ b, to select one of Automatic and Custom, when you select automatic, the other are disable and can not be
adjusted.
Size: press _ _ to select one of Normal/Large and Small.
Font: press _ _ to select one of Default and from Front 1to Font 7.
Text Color: press _. / _ to select one of Red/Green/Yellow/Magenta/Cyan/Black and White.
Text Opacity: press _. / _ to select one of the Solid/Flashing/Transparent/Translucent
Background Color: press _ / _ to select one of Red/Green/Yellow/Magenta/Cyan/Black and White.
Background Opacity: press _ / _, to select one of the Solid/Flashing/Transparent/Translucent
Edge Effect: press _ / _ to select one of the None/Raised/Depressed/Uniform/Left Shadow/Right Shadow.
Edge Color: press _ / b, to select one of Red/Green/Yellow/Magenta/Cyan/Black and White.

Press MENU on the front panel or on the remote control and then use ,t / _ to select the Feature menu in VGA

mode.

1. Use A / v to select what you want to adjust in the FEATURE menu.

2. Press ENTER button to select it and then use ,4. / D,to adjust

3. When you are satisfied with your adjustment, press MENU to exit the main menu.

VGA Set
Press A / v button and then press ENTER to enter the VGA set menu as below

H-Pos

Press ENTER button to select it and then use ,4. / _, to adjust the horizontal position of the picture.

25

V-Pos
Press ENTER button to select it and then use < / _, to adjust the vertical position of the picture.

Phase

Press ENTER button to select it and then use < / _ to adjust the phase of the picture.

Clock
Press ENTER button to select it and then use < / _ to adjust the clock of the picture.

Note:
Phase- This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Clock- This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen

size also will change.

Position- This function is to adjust the picture to Left/Right and Up/Down as you prefer.

Auto Adjust
Press ENTER button to select it and then use <. / _, to do auto adjust that automatically adjusts the available options for the
best viewing configuration.

Setting

Press ENTER to do preset that can return to the factory setting.

Press MENU on the front panel or on the remote control and then use < / =, to select the Feature menu in Ypbpr

mode.

1. Use A / v to select what you want to adjust in the FEATURE menu.

2. Press ENTER button to select and then use ,q. / D,to adjust

3. When you are satisfied with your adjustment, press MENU to exit the main menu.

Component Set

Press A / v button and then use ENTER to enter the VGA Set menu as below

26

Press MENU on the front panel or on the remote control and then use _ / _ to select the Feature menu in HDMI
mode.

i! ¸ :!i

Time Set

Press A / v button and then use ENTER the time set menu that allowsyou to set the time the IV will display.

Sleep timer

Press ENTER button to select it and then use ,4 / _ to adjust the amount of time before your TV turn off automatically and
press the ENTER that can select the 15min/30min/45min/60min/90min/120min/180min/240min and OFF.

Advance Video Menu

Press ENTER to enter the advance video menu.

Identifying Problems

If there are any problems using the product, please first consult the list below. If the list below does not solve the problem, call our
Customer Service Center immediately.

27

Setupand Connection

The -IV won't turn on. Check your power cable connection.

• I can't view the Basic channels. Check the connection of the antenna cable.

• I want to view cable channels. Register with your local cable company then connect their receiver to your TV.

• I want to view satellite channels. Setup your Satellite parabola antenna then connect your satellite receiver to the -IV.

• Digital broadcasting is not functioning. Check your antenna cable connection. Check if the digital channel selection is correctly
connected to your antenna cable.

Menu and Remote Control

• The Remote Control isn't functioning well.

Change the batteries.

Check the polarity of the batteries.

Check the angle of the remote control from the product or if there are any obstacles between the remote control and the
product.

Check if you have pressed the correct key for the correct option.

Try to a bright light position near TV's which transmit a strong light source on TV <remote receiver> window.

• I cannot change channels with the remote control.

Press [TV/AV] and select <TV>.

Try to use the remote control for the cable or satellite receiver to change the channel.

• External input channels cannot be selected.

Check your external input connection cable.

• A Menu cannot be selected.

Check if the menu is grayed out, and if it is, that menu cannot be selected.

Screen

• Poor picture
Is the power cord unplugged? Make sure the power cable is plugged in correctly, and then press the power of the remote
control.

• Black picture
Check if external input mode is selected

Press [external input selection] and select TV

• Lined and flickering picture.
Try to finely adjust the channel.
Are there any TV waves flowing or cordless radio transmitting stations? Avoid using cordless phones, hairdryers or electrical
drills.

• Disfunctioning channels.
Check if the channel has been selected correctly.
Try changing the position of the antenna.

• Picture with white and black dots.
Check if your antenna is damaged or any connections are broken.

Replace your antenna.

28

• Onlycertainchannelsareinblackandwhite
Checkiftheprogramisbeingbroadcastinblackandwhite.
Trytocheckthehueorcontrast.

• TheSub-Screenisblack.
CheckthepoweroftheexternaldeviceconnectedtotheTV.

Ifthepowercordisdisconnected,thescreenwillbeblack.

• Automaticturn-onisinactive.
WhenturningoffyourTV,youneedtousetheremotecontrolorpressthepowerbuttonontheTV.(Ifyoupulltheplugonthe
TV,thesettingswillbedeleted.)

8ound

• Poorqualitysound
Checkiftheprogramisinstereo.Stereomaynotworkwellinareaswithbadreception.TryusingMonofortheseareas.

• Soundismalfunctioningwhileusingacable.
Checkyoursoundconnectingcable.

Checkifotherchannelsalsohavenosound

• Icanseeimages,butthereisnosound.
Pressthevolumebuttonstoincreasethesound.

Trywatchingavideo(ifthevideohassound,checkyourcablecompany).Ifthereisnoproblemwiththecablereceiver,then
callourcustomerservice.

Checkiftheinternalspeakersare<OFF>.

• Thereisamalfunctionafterthevolumeisincreased
TrytoadjusttheexternaldevicesconnectedtotheTV(Digitalchannelreceiver,DTV,DVD,Cablechannelreceiver,video)

Ifyoucanadjustyoursound,trytobalancethevolumeoftheTVandtheexternaldevice.

Channel

• Thechannelsarenotfunctioning.
Connecttheantennaconnectorsagain.
Settomemorizechannelsintheautomaticchannelsettingagain.
Querytheparticularbroadcastingstation.

• Alimitednumberofchannelsarenotfunctioning.
Changethelocationordirectionoftheantenna.
Trytoselectafewchannelsusingnumbersandmemorizethemusingtheadd/deletebutton.
Querythebroadcastingstation.

• OnlyUHF(14~69)Channelsareunavailable.
CheckiftheantennaisabletoreceiveUHF.

Monitor
ThePCScreencontinuallyappearsanddisappears.

ChecktheconnectionbetweentheTVandthecomputerandseeiftheconnectorislocked.
A"Thereisnosignal"messageappears.
ThishappensifthesignalfromthevideocardisexceededforthemaximumresolutionorfrequencyoftheTV.Trytosetthe
maximumresolutionorfrequencyfortheTV.

29

SeeifpowersavemodeofthePCfunctionsproperly.(Thisisdeactivatedwhenanykeyispressedorthemouseismoved)

• Thescreenlookslikethereiswaterflowingonit.
ChecktheconnectorconnectedtotheTV.

• Thescreenisunclearandblurry.
Changethefrequencyandphaseadjustment.ChangetheResolutionandfrequencytothestandardlimit.

• Unstableandflickeringscreen.
TheresolutionandfrequencyofthePC'sGraphicsCardshouldbesetwithintheTV'srange.ChecktheTVmenu'scurrent
modeandstandardmodeandsetitupagain.

• Somemodesinstandardmodearenotworking.
Checkthecompatibilityofthevideocard.
Ifitisnotworkingforcompatiblehardware,trytoupgradethedriverofthegraphicscard.

3O