
lumiTab
7” Android Tablet with In-built Projector

Introduction
• lumiTab
• Stand
• AC power charger
• Screen protector
• Pouch
• Micro-USB Sync cable
• User Guide
• Warranty card
Packaging Contents
1
Thank you for purchasing Promate lumiTab – a 7” Android Tablet
with an In-built Projector. The lumiTab offers an amazing tablet
experience with extraordinary features. It is the World’s First
Android Tablet with an In-built Projector. Sharing multimedia has
never been easier. With lumiTab, you can enjoy interactive games,
process important documents, read e-books with your family,
make presentations, mirror and control your laptop PC, listen to
music or even play videos or movies. All of this happens with the
freedom of displaying everything in widescreen, by using its one
button projection system. All you have to do is just point the
lumiTab to any plain open space or a wall and view your tablet
screen on a bigger display. Perfect for wide scale viewing, Powered
with Dual core processor which supports the latest Android 4.2
platform (Jelly Bean), with evolved UI and innovative projection
quality. The advanced DLP technology delivers an incredibly sharp
1080p HD image. Slim and fast, the lumiTab is equipped with full
Google Mobile apps and services such as Gmail, Google Maps,
Google Talk, Google Search and Youtube.

Power Button: Long press to turn On/Off. Short press for
Hibernating/Awakening
Volume Plus: Increase the volume
Volume Minus: Decrease the volume
Projector Switch: Turn on/off the projector
Focus Slider: Adjust the projection focus
Appearance and Interface Description
2
Focus Slider Projector Switch
Volume Up
Front Camera
Microphone
DC Charge Input
3.5mm Audio Jack
Micro SD Card Slot
OTG-USB
Mini HDMI slot
Speaker
Rear Camera
Volume Down
Power Buon

Technical Specification
3
Function: • Hardware 1080p video decoding
• 3D Graphics acceleration
• HDMI video output
• 2M pixels front camera
• 2M pixels rear camera
Connectivity: • IEEE 802.11 b/g/n Wifi network
• Bluetooth 4.0
• USB 2.0 High-speed OTG support
Sensor: • Three-axis accelerometer
• Microphone
Screen: • 7-inch 1024x600 wide viewing angle
high-definition IPS screen
• Capacitive multi-touch touch screen
Pico Projection: • Display Technique: DLP
• Resolution: WVGA (854x480)
• Illuminant: LED, 20,000 hours life span
• Luminance: 35 Lumens
• Projection size: up to 100”
• Projection ratio: 1.5
Operating System: Google Android 4.2 (Jelly Bean)
CPU: TI OMAP4460 Dual Core ARM Cortex-A9
Frequency: 1.5Ghz
Memory: 1GB LPDDRII RAM
Storage: 16GB built-in flash memory; Micro SD card slot
Audio: • 3.5mm standard stereo headphone port
• High-quality stereo loudspeakers
Battery: 4800mAh Built-in Lithium Polymer Batter
Power Supply: • Input Voltage: 5V
• Maximum Power: 10W

Please make sure that the battery is fully charged before your first
use. To charge battery, please connect the supplied charger to
mains power outlet, and insert the DC jack end into the charge
interface of lumiTab. Switch On the AC mains. After a few seconds,
the charging instructions will appear on the screen. During battery
charging, you can view the charging progress by pressing the
power button. Once the charging is complete, please unplug the
charger from lumiTab and the power supply connection.
Battery Charging
4
Baery Charging Diagram