Pro-line ii 92892 User Manual

92892

		MANAGER’S CHAIR
			OPERATING INSTRUCTIONS
			FEATURES
			• PNEUMATIC SEAT HEIGHT ADJUSTMENT
				To raise seat remove pressure from seat and pull lever (4) up.
				To lower seat height sit on chair and pull lever (4) up.
			• SEAT ANGLE ADJUSTMENT
				To adjust seat angle, lift lever (2). Leave lever up for free float or
				push lever (2 ) down to lock.
			• BACKREST ANGLE ADJUSTMENT
				To adjust back angle lift lever (1). Leave lever (1) up for free
				float or push lever (1) down to lock at any angle.
			• SEAT SLIDER ADJUSTMENT
				To slide seat forward or backward, pull handle bar (3) out.
				Release handle bar (3) to lock desired seat position.
			• TILT TENSION ADJUSTMENT
				To adjust title tension, Turn knob (6) clockwise to increase
				tension and counter-clockwise to decrease or ease the tension.
			NOTE: Be careful not to completely loosen knob (6).
			• SEAT/BACK ANGLE ADJUSTMENT & FORWARD TILT
7				To adjust Seat/Back angle, lift lever (2) leave lever up for free
				float orpush lever down to lock . For forward tilt lean back with
				lever (2) in the down position and push lever (5) forward. Lift
				lever (2) and the seat willl tilt forward for keyboard
	6			intensive activities.
1 2 3		8	• ARM HEIGHT ADJUSTMENT
	5			To adjust arm height, push buttom (7) to allow the arms to move
4				up or down freely. Release buttom (7) once the desired
				height is reached.
			• ARM HEIGHT WIDTH ADJUSTMENT
				To adjust arm width, loosen knob (8) to allow the arms to move
				in and out freely. tighten knob (8) once the desired width is reached.
			WARNING
			1. Use this product only one person at a time.
			2. Do not use this chair unless all bolts screws and
				knobs are securely tightened.
			3. Check that all bolts screws and knobs are tight every
				three months or as needed.
			4. Dispose of packing material properly. Do not use
				plastic cover as head covering. It may cause
				suffocation.
			5. Do not use chair as a stepladder.
LIMITED WARRANTY			6. Use this chair for its intended purpose only.
			7.	Use mild detergent only for cleaning.

Pro-Line II chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:

•Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.

•3 Years on upholstery fabric and foam against wear and deterioration.

To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return authorization. At it’s option Office Star Products will:

(a)Supply compatible components of current manufacture.

(b)Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components still in warranty will be paid by Office Star Products.

*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail [e-mail], by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00

p.m. Pacific Time.