Proline TTR 60WP Operating Instructions Manual

PROLINE

TTR 60WP

Refrigerator

Operating instructions

Please read this instruction manual carefully before operation
Keep these instructions in a safe place for future reference

CONTENTS

Part Identification 2
Safety Information 3
Installation 3
Electrical Connection 4
Operating your refrigerator 5
Setting the Thermostat Control 5
Defrosting 5
Cleaning your refrigerator 6
Reversing the door 6
Before calling for service 7
Do’s and Don’ts 8
Prolonged off periods 8
Technical data 9
Environmental notes 10
Help line numbers 10

Par ts ldentificatio

n

Check the follo win g con tents are includ ed with the product and inspectt he casing for any damage.If there is any dam age, contact
th e retai ler fr om who m yo u purc hased the pr od uct.

1. Condenso r

2. Thermostat control

3. Door

4. Shelf x 1

5 .D rip t ray

Also included:

Instruction booklet

4

I ce c u be tr ay

FIGUR E 1

1

2

3

5

After unpacking, wip e the casing with a d ry cl otha nd clean the inside with a damp cloth ready for use.

Dear Customer:
Thank you for buying a Proline Refrigerator. To ensure that you get the best results
from your new refrigerator, please take time to read through the simple instructions in
this manual.
Please ensure that the packing material is disposed of in accordance with the current
environmental requirements.

Safety information

This information is provided in the interest of your safety. Please read the following
carefully before carrying out the installation or use of the refrigerator.

If you are discarding an old freezer or refrigerator/chiller with a lock/catch fitted.
Ensure that it is left in a safe condition with the lock/catch broken to prevent the
entrapment of children.

Old refrigerator equipment may contain CFC’s that will damage the ozone layer.
When disposing of any refrigerator equipment please contact your local waste
disposal department for advise on safe disposal.

This refrigerator must be only used for its intended purpose.

If the power cable requires replacement, this must only be undertaken by a suitably
qualified person, as special purpose tools are required.

Installation

Position the refrigerator and allow to stand for two or three hours before it is turned
on for the first time to allow the system to settle. Do not position next to any heat
source e.g. cooker, boiler or in direct sunlight etc.

A clearance of 10cm must be left between the sides of the appliance and any adjacent
cabinets or walls to allow for adequate air circulation. This refrigerator is not designed
for a recessed installation (“building in”)

Install on a good firm level surface.

The refrigerator is heavy, carry the refrigerator by the casing not the door.

For purpose of safety all electrical repairs or maintenance must be carried out by a
qualified electrician or service agent.

Warning the plug must be accessible after the refrigerator is in position

This appliance is for refrigerating food and making ice cubes.

If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.