Prokit's Industries MA-1503I User Manual

MA-1503A (AC 110V-120V 60Hz）
MA-1503I ( AC 220V-240V 50Hz )
Magnifier Workbench Lamps

Certificate Number: TW98/12323QA

寶工實業股份有限公司

PROKIT’S INDUSTRIES CO., LTD.
http://www.prokits.com.tw

E-mail: [e-mail]

User’s Manual

1st Edition, 2009

©2009 Copy Right by Prokit’s Industries Co., Ltd

Magnifier Workbench Lamps Magnifier Workbench Lamps

Model No.:MA-1503A/I
Magnifier Workbench Lamps

Thank you very much for purchasing our Magnifier Lamp. The
Magnifier Lamp is ideal for precise work in home, office and
workshop as well as a lot of other important places which need
not only god light source but also magnification. Before using
the Magnifier Lamp, please read the following instruct ions
completely.

Features:

z Complies with CE safety standards
z 3 diopter (1.75X magnification) glass lens.
z New improved clamp-on sponge design for firm contact

on smooth surfaces

z and mounts to any bench or desktop.
z Even, shadow-free light under the magnifying lens with

9-watt fluorescent

z tube will make it easier for you to see and enjoy the

activities longer.

z Spring balanced adjustable arm for easy maneuverability

and positioning.

z Easy to replace the fluorescent tubes.

Data and specification:

Lens: 3D (1.75X magnification glass lens)
Lens size: :∅190*155mm
Light Source: PL 9W x 2pcs compact fluorescent lamp
Voltage: MA-1503A AC 110~120V/MA-1503I AC 220~240V

How to use:

A. Before use, remove all packing from around the lamp.
B. Put the lamp on the horizontal table.
C. Insert the plug into a conveniently located electrical

socket.

D. Switch on using the ON/OFF switch located on the

surface of the base.

E. To place the head in the desired position.

Caution for safe using:

A. Indoor use only.
B. Never disassemble the magnifier lamp unless you are

qualified electrician.

C. Plug must be taken out while repairing the magnifier

lamp.

D. If the external flexible cable or cord of the magnifier

lamp is damaged, it should be replaced by a special
cable or cord exclusively available from the
manufacture or its agent.

E. Never leave the lens unattended in direct sunl ight or

where light can shine through it . This constitutes a fire
hazard.

Troubleshooting:

1. Make sure A/C power cord is securely connected to a
power outlet

2. Turn on power switch

3. Check tube is ok.