SXGA (1280 x 1024)
High resolution
3000 ANSI lumen
High brightness
DLP Technology
Single chip
28 dBA
‘Noiseless’
Stylish
Magnesium
3 kg / 6.5 lbs
Compact, low weight
www.projectiondesign.com
The projectiondesign F1
A unique concept
The F1 projector series has been designed to meet the stringent
requirements of installers and professional users, and despite its small size,
high performance and image quality have been main objectives during its
development. With high brightness, lens options, flexible installation
possibilities and highly accurate mechanics and optics, the F1 is fit for
almost any installation need. The F1 has been designed with performance
and value for money as the number one priority.
Single Chip DLP™ Technology by Texas Instruments
®
With focus on image quality and long life performance, using DLP™ is a
natural choice. A single chip system has no convergence errors, a problem
found with other competing 3-chip technologies. It also displays a highly
accurate grey scale, without colour casts or shifts. Transferred to color
images, this yields accurate reproduction of colors, and for instance flesh
tones are rendered with natural precision. Using a single DMD™ (Digital
Micromirror Device™) ensures a uniform black and white image, with very
high contrast, unmatched by any competing digital technology. The
DMD™ display itself is completely sealed, and as it is a non-organic device,
does not change it's behaviour over time, providing a completely reliable
display system, even for 24/7 applications, where continuous operation
is a requirement. The F1 SXGA is the only portable projector available
anywhere that uses the SXGA (1280 x 1024) resolution DMD™, thus
provides unmatched performance.
Digital Signal Processing for maximum image quality
Signal processing is based on the best possible components available
within each category. Using patented Faroudja™ DCDi
®
10-bit motion
adaptive de-interlacing with automatic film mode detection and 3 : 2 and
2 : 2 pull down, diagonal processing (eliminates jagged lines), bad edit
detection, and cross colour suppression, creates a film like image from any
video input. Image processing includes proprietary linearity control, with
specifically developed gamma curves and application adaptability through
intuitive menus. The different gamma curves allows the user to match the
projector to the desired application, for instance photographically correct
rendering of images in a controlled environment, or filling a large conference
room screen with a PowerPoint presentation. Furthermore, the F1 has an
intuitive and easy to use user interface that controls all aspects of the
image, such as individual color adjustments of R, G and B, and horizontal
and vertical keystone correction. The F1 also has a Rich Media interface
built in, to interface with other devices.
The F1 SXGA has been specifically designed for professional users of
graphically demanding business or engineering applications, by
combining unprecedented resolution and brightness with portability.
Its' performance enables users to, for the first time, display true high
resolution data while on the road. The F1 SXGA is fit for usage in
demanding applications such as visual simulators, medical,
engineering and geophysical research, by combining professional
performance in a small, robust projector.
www.projectiondesign.com
Professional connectivity and compatibility
The F1 has connectivity and compatibility of professional grade. A wide
range of digital and analog computer and video sources are all supported
through industry standard connectors, allowing easy installation. The F1
supports up to 1920 x 1080 resolution for full compatibility with HDTV. It
also supports all available types of synch signals, and digital video over DVI
supports the industry standard HDCP encryption signalling for lossless
transfer. The high bandwidth allows for very high input signal frequencies,
and supports all standard signals. High bandwidth gives head room to
handle any signal, and ensures stable projected images. Up to six different
sources can be simultaneously connected.
High resolution Optics
The optical system incorporates a fully sealed, all-glass prismless
design, using aspherical low dispersion elements. The sealed
architecture prevents the optics from dust or smoke contamination,
minimises servicing needs, prolongs life of the projector, and enables it
to be used in a variety of environments, such as control rooms and
simulators. The use of a single lens eliminates any convergence errors,
and remains perfectly focused at any time. Complementing the
standard lens is a short throw lens with ultra low distortion.
The optics have been designed to create an image that is offset at all time,
enabling the image to reside above the horizontal line through the lens, so
that the projector can be flush mounted with ceilings, or out of the direct
view of the image. The UHP™ lamp from Philips ensures excellent
performance during prolonged use.
Focus on build quality and design
The main cabinet consists of only two major parts, and is made from cast
magnesium. It is one of the most rigid materials available for any
mechanical structure, with high internal stiffness and accuracy. Using
magnesium throughout the mechanical structure - also the main optical
engine and components are made of it - creates a highly accurate and
durable projector. High accuracy guarantees that the optics work under
the best possible conditions at any given time, and ensures that image
quality and performance is consistent from unit to unit. Thus, applications
with multiple projectors installed in systems are easily enabled. The cast
magnesium chassis also minimises electronic noise emitted from or
allowed into the system.
For the majority of business applications, where overall impression
cannot be compromised, the brightness, contrast and and image
quality of the F1 XGA will yield optimal results. With it’s high
performance, it is the perfect projector for meeting and conference
rooms, where users interact with it on a daily basis.
www.projectiondesign.com
Accessories
Wide Angle Lens
The wide angle lens option provides ultra short throw ratios of 1 : 1 and
1.28 : 1 (distance to image width) for the F1 SXGA and the F1 XGA
respectively. The throw ratio enables the projector to be used in rear
projection systems and simulators, without taking up unnecessary space.
The short throw lens has very low optical distortion by any standard, and
has been designed to enable matching of several projectors side by side.
Lamp
The user replaceable UHP™ lamp comes in a calibration optimised fixture,
to ensure proper and accurate mounting in the projector. A properly
mounted lamp enables the projector to work under optimum conditions at
all times, with like-new performance. Lamps are quickly and easily replaced
by the user.
Infrared Remote Control
The remote control has direct functionality for menu system access and
thereby control and command, as well as single-key control for aspect ratio
toggle, source switching, volume control and mute. It has a built-in laser
pointer, and emulates a computer's mouse control for presentation control.
The RC has been designed to omit disturbance
Ceiling Mount
The F1 can be ceiling mounted, and supports rear projection, in addition to
standard desktop front projection use.
Ceiling Mount Cable Cover
The provided ceiling mount cable cover, when installed, conceals all cables
connected.
Precision optics
www.projectiondesign.com
1
1
(
)
2.2
)
(
)
%
100%
2250mm
000
A
2.20
1
(
)
2.80
1.28
1
(
13%
%
2200mm
2800mm
1280
50
GA
F1 SXGA 5 : 4 aspect ratio
1.75 - 2.25 : 1
Dist. (m) Image Height Width Diagonal Offset 5%
1.5 Max 0.69 0.86 1.10 0.034
Min 0.53 0.67 0.85 0.027
2 Max 0.91 1.14 1.46 0.046
Min 0.71 0.89 1.14 0.036
4 Max 1.83 2.29 2.93 0.091
Min 1.42 1.78 2.28 0.071
6 Max 2.74 3.43 4.39 0.137
Min 2.13 2.67 3.41 0.107
8 Max 3.66 4.57 5.85 0.183
Min 2.84 3.56 4.55 0.142
10 Max 4.57 5.71 7.32 0.229
Min 3.56 4.44 5.69 0.178
F1 XGA 4 : 3 aspect ratio
2.20 - 2.80 : 1
Dist. (m) Image Height Width Diagonal Offset 13%
1.5 Max 0.51 0.68 0.85 0.066
Min 0.40 0.54 0.67 0.052
2 Max 0.68 0.91 1.14 0.089
Min 0.54 0.71 0.89 0.070
4 Max 1.36 1.82 2.27 0.177
Min 1.07 1.43 1.79 0.139
6 Max 2.05 2.73 3.41 0.266
Min 1.61 2.14 2.68 0.209
8 Max 2.73 3.64 4.55 0.355
Min 2.14 2.86 3.57 0.279
10 Max 3.41 4.55 5.68 0.443
Min 2.68 3.57 4.46 0.348
5 : 1(zoom lens
th
id
w
e
g
a
m
i
m
m
0
0
0
t 1
t a
h
ig
e
h
e
g
a
Im
5
: 1 (zoom lens)
Image height at 1000mm image width
mm
100
7
Projection distance
.75 :
1750mm
zoom lens
:
zoom lens
1
wide angle
mm
:
mm
F1 SXG
wide angle)
F1 X
Key benefits
28 dB
One of the primary concerns during the design and development of the F1 projectors has
been to reduce audible operating noise. While most projectors are very noisy, the F1
operates at only 28 dB. This noise is lower than most computers, even laptop computers
operating at full speed. To achieve this, the F1 has been designed using magnesium,
allowing complete control over resonance and turbulence, typically the troublemaker in
regular projectors. In addition, our proprietary air flow system and suspended fan cooling
systems further reduce noise.
3 kg
To be truly portable, a projector must be small and light weight. At just 3 kg, the F1 weights
only 1/10 of most competing high resolution projectors, which makes it the only portable
option in the professional segment. The low weight of the F1 is partly due to the use of
exotic materials such as ceramics and magnesium. These are extremely rigid and precise
materials that ensure high durability and ruggedness, as well as precise operation for many
years. The light weight also optimises the projector for installation in environments where
vibration is a concern, and minimises mechanical stress on any fixing or mount.
SXGA
The unsurpassed 1280 x 1024 SXGA resolution of the F1 SXGA makes it the only portable
high resolution projector available. It is compatible with sources up to 1920 x 1080 with a
maximum dot clock of 205 MHz, thus is the most compatible portable projector anywhere.
The high resolution matches that of high end workstations, and provides 67% more
information on-screen than standard XGA. The F1 SXGA is fully compatible with all major
graphics standards, and is perfect for use within for instance medical, engineering, financial
and DTP applications.
3000 lumens
A typical portable business projector has a brightness of 2000 ANSI lumens. The F1
surpasses those with 50%, and sets a new standard for portable projectors, with its high
3000 ANSI lumens rating. This is in class with more commonly installed projectors, thus the
F1 is fit both for fixed installations in auditoriums and meeting rooms where light cannot
easily be controlled, as well as being a portable projector with professional performance.
No matter where a meeting is, or a presentation is held, the F1 is bright enough to cope
with the light conditions.
Magnesium
The F1 series has been designed for high durability, long and trouble free operation, as well
as an attractive and stylish look. By using magnesium, a very rigid and process-demanding
alloy, we can assure that the F1 fulfils any demand for a nice, attractive, projector, and at
the same time is many times more durable than most competing projectors made from
plastic. The magnesium cabinet is extremely rigid, and to keep the performance high
throughout the projector, all internal mechanical details are made from the same alloy.
Magnesium is fully corrosion resistant.
www.projectiondesign.com
Projector
Display Technology
Concept
Resolution
Brightness
Contrast (on/ off)
Aspect Ratio
Colors
Compatibility Computer Compatibility
Horizontal Scan
Vertical Scan
Video Compatibility
Bandwidth
Optics Standard Lens
Throw Ratio (dist. : width)
Image size (diagonal)
Lens Offset (of image height)
Focusing Distance
Zoom Ratio
Lamp
Lamp Life (typ)
Optional wide angle lens
Inputs / Outputs Computer Inputs
Video Inputs
Audio Inputs
Control and Communication
Computer Output
Audio Output
Supplied Accessories Cables
Other
General Operating noise level(typ)
Dimensions (dwh)
Weight
Power Requirements
Conformances
Operating Temperature
Operating Humidity
F1 SXGA
SXGA DLPTMdigital projector (101-0001-00)
SXGA WIDE DLP
TM
digital projector (101-0011-00)
DDR DMD
TM
with DM3
Sealed all-glass, prism less optical design
1280 x 1024
3000 ANSI lumens
1000 : 1
native 5 : 4, 16 : 9 and 4 : 3 compatible
16.8 Million simultaneously displayable
UXGA, SXGA+, SXGA, XGA, SVGA, VGA
15 - 150 kHz
48 - 190 Hz
HDTV (1080i, 720p, 576i/p, 480i/p)
NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM
205 MHz on analog RGB
165 MHz on digital RGB over DVI
f=31.1 - 39.2 mm, F/2.8-3.0
1.75 - 2.25 : 1
0.9 - 7.3 meter (2.5-18ft)
+5%
1.5 - 10 meters (5-33ft)
1.3x
250 W UHP
TM
2000 hours
f=17.9 mm, F/2.8, 1 : 1 throw ratio
2x 15 pin HDDSUB (analog RGB)
1x DVI (digital RGB)
3x RCA (component)
1x 4-pin Mini DIN (S-video)
1x RCA composite video
4x 3.5 mm Stereo Mini Jack Audio (all channels)
1x RS232 9-pin DSUB (control)
1x USB (mouse control and firmware upgrade)
1x 15 pin HDDSUB (analog)
1x 3.5 mm Stereo Mini Jack
2 m VGA cable, 15pin HDDSUB
2 m DVI-D cable
2 m USB cable
2 m A/V cable, 3x RCA - 1x RCA + 3.5 mm Mini Jack
Stereo Audio cable 3.5mm Mini Jack - 3.5 mm Mini Jack
Ceiling Mount Cable Cover
Standard IR remote control
28 dB (A) at 20C/ 68F, sea level
244 x 278 x 88 mm (9.6 x 10.9 x 3.5 inches)
3.0 kg / 6.5 lbs
100 - 240 VAC, 50/60 Hz, +/- 10%
350 W power consumption
CE, CSA "C/US", FCC Class A
0 - 40C / 32 - 104F, 0 - 1500 m
0 - 35C / 32 - 95F, 1500 - 3000 m
20 - 90% RH
F1 XGA
XGA DLPTMdigital projector (101-0002-00)
XGA WIDE DLP
TM
digital projector (101-0012-00)
12 degree DDR DMD
TM
with DM3
Sealed all-glass, prism less optical design
1024 x 768
3000 ANSI lumens
2000 : 1
native 4 : 3, 16 : 9 and 5 : 4 compatible
16.8 Million simultaneously displayable
UXGA, SXGA+, SXGA, XGA, SVGA, VGA
15 - 150 kHz
48 - 190 Hz
HDTV (1080i, 720p, 576i/p, 480i/p)
NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM
205 MHz on analog RGB
165 MHz on digital RGB over DVI
f=31.1 - 39.2 mm, F/2.8-3.0
2.20 - 2.80 : 1
0.7 - 5.7 meter (2.5-18ft)
+13%
1.5 - 10 meters (5-33ft)
1.3x
250 W UHP
TM
2000 hours
f=17.9 mm, F/2.8, 1.28 : 1 throw ratio
2x 15 pin HDDSUB (analog RGB)
1x DVI (digital RGB)
3x RCA (component)
1x 4-pin Mini DIN (S-video)
1x RCA composite video
4x 3.5 mm Stereo Mini Jack Audio (all channels)
1x RS232 9-pin DSUB (control)
1x USB (mouse control and firmware upgrade)
1x 15 pin HDDSUB (analog)
1x 3.5 mm Stereo Mini Jack
2 m VGA cable, 15pin HDDSUB
2 m DVI-D cable
2 m USB cable
2 m A/V cable, 3x RCA - 1x RCA + 3.5 mm Mini Jack
Stereo Audio cable 3.5 mm Mini Jack - 3.5 mm Mini Jack
Ceiling Mount Cable Cover
Standard IR remote control
28 dB (A) at 20C/ 68F, sea level
244 x 278 x 88 mm (9.6 x 10.9 x 3.5 inches)
3.0 kg / 6.5 lbs
100 - 240 VAC, 50/60 Hz, +/- 10%
350 W power consumption
CE, CSA "C/US", FCC Class A
0 - 40C / 32 - 104F, 0 - 1500 m
0 - 35C / 32 - 95F, 1500 - 3000 m
20 - 90% RH
All brands and trade names are the property of their respective owners. Specifications subject to change without prior notice. All values are typical and may vary. Patent pending on lamp and cooling system.
92003 Projectiondesign.com. All rights reserved. Design: www.ekerdesign.com.
Technical specifications
601-0026-00
Loading...