projectiondesign avielo optix 3D Product Sheet

optix 3D

www.avielo.com

avielo by projectiondesign

avielo by projectiondesign home cinema projectors are

designed, manufactured, and caressed in house. Our

philosophy, goal and desire are to serve you with the best

image quality available anywhere. Therefore, we keep it

all in house, with direct control over all development and

manufacturing.

optix 3D

Our entire team is built up of highly passionate video and

film enthusiasts, all dedicated to bringing the real cinema

experience closer to you. By combining passion and

knowledge with state of the art technology, we believe

we can contribute to an unmatched experience in your

home cinema.

Quality is our outmost concern. Selling a projector for

home cinema is not just like selling any product. It is

selling our dedication and lifestyle, and at the same time

attending to yours.

optix 3D

The new optix 3D is a first class single chip 3D DLP®

projector at up to full 1920 x 1080 pixel resolution. No

interlacing or other picture compression technologies.

Said simply, it is the only single chip DLP projector that

actually keeps its high resolution in 3D, displaying even the

most graphically challenging and complex applications in

stunning 3D.

Installation flexibility

the optix 3D is a powerful and robust projector in a small

chassis. Along with a wide range of lenses and rotation

options, it has close to unlimited installation flexibility,

whether you want ultra-wide on axis or off axis long

throw, or even rear projection, perfect for installations in

everything from a small home theater to large customized

theater

DLP technology – chosen for reliability

The DLP technology from Texas Instruments® is chosen

for its unmatched reliability, and its image quality. With

a widely recognised and proven reliability record and

high brightness and contrast, all whilst displaying utterly

natural colours, it is the obvious choice for heavy duty

applications that run continuously, or are mission critical.

Independent testing has proven DLP technology to be

the most reliable of all microdisplays; not degrading

when subjected to UV light, inherent in all projectors.

Unlike competing technologies, which can show

severe image quality degradation after only a few

thousand hours, DLP technology remains constant

over hundreds of thousands of hours of operation with

no image degradation at all.

3D support

With the optix 3D we support most of the available 3D

formats existing today, we have a unique system which

is module based and can be installed on the rear end of

the projector (XPort™). The optix 3D can not only be used

as a bluray 3D projector, but also to support 3D gaming,

3D photo, 3D broadcast and other 3D formats in all

resolutions and with close to no limitations. optix 3D is

the ultimate solution for the home theater. The projector

has built in support for DLPLink™ active shutter glasses, RF

and IR 3D glasses.

optix 3D

optix 3D

Real Life view

The avielo optix 3D does not compromise

the picture quality. Unlike other projectors in

the market utilising various technologies that

actually reduce the resolution in 3D mode,

we ensure users get fully uncompressed 3D

at full 120 frames per seconds (see illustration

right). To you that means an exceptional real

life view unmatched by any other projector,

offering possibilities indispensible for those

working on a micro level of interventions, or

those who simply requires the best possible

image.

120 Hz refresh rate

With its high refresh rate of up to 120Hz full

frame, you get twice the amount of pictures

per second, eliminating judder and motion

blur with fast-motion content, perfect for

installations like medical, simulation and

training.

Full

Line by Line

Side by Side

Top/Bottom

Checkerboard

Available XPort™ options, optix 3D projector

What is it?

The XPort™ DCC120 Dual Channel Combiner
is a unique optional image processor built for
optix 3D with XPort™ 1 extended connectivity:
It allows any system setup to benefit from
120Hz frame rate on digital inputs, reducing
image smear and judder, whilst at the same
time enabling all formats of 3D from any input.

optix 3D

What is it?

The XPort™ HDMI 1.4 is a module with
two HDMI 1.4 connectors with supporting
electronics. It support all the new specifications
defined by the HDMI group.It support 3D up
120Hz( Full, Line by line, Side by Side, Top/
Bottom and Checkerboard).

What does it do?

The Xport™ DCC120 converts any two
connectors of either DVI-D, VGA, HDMI 1.3 or

1.4, 3G-SDI or DisplayPort into one sequential
stream of up to 120Hz. Perfect for any existing
infrastructure, adding benefits to this whilst
saving cost.

Dual Channel Combiner – DCC120.

Flexibility in a little connector. The new XPort™
DCC120 makes the most of your new or
existing infrastructure, making any system
benefit from an amazing image quality, double
the bandwith, and by combining any two input
signals it supports any 3D formats. It gives you
benefits not only measured in pixel precision
and reduced artefacts, but also it is the most
comprehensive 3D converter supporting any 3D
format available.

What does it do?

The new XPort™ HDMI 1.4 is a module
with two HDMI connectors. It translate a
broad range of signals in standard and non­standard formats. The XPort™ HDMI 1.4 use
a proprietary image processing technique to
identify the characteristics of an incoming signal
and configure the system to produce the best
possible image.page.

Full bluray 3D support.

Flexibility in a little connector. The new XPort™
HDMI 1.4 module uses adaptive frame rate
control, meaning the module allows for any
frame rate in to any refresh rate out. For
example 15fps input to 120hz output. The
module will also use Content Adaptive Motion
Estimation and Motion Compensation to
dramatically improve motion performance,
all frame by frame panning will be perfectly
smooth.

“

Standardised bolt-on ceiling mount interface

95

82.5 53

optix 3D

Your environmentally friendly choice

Projectors consume the same amount of power

independently of screen size. This means for large

displays, projectors are your environmentally

friendly choice. The power consumption of

regular TV’s rapidly increases with increased

screen size. Every time you double the inch, you

use 4 times as much power! To illustrate: A typical

50” 3D plasma screen will consume approximately

250W. Increasing the size to a 100” 3D plasma

screen it will consume a whopping 1000W.

Comparing this with a projector, which consumes

approximately 350 W regardless of your image

size, you save a considerable amount of energy.

Therefore projectors are your environmentally

friendly choice.

163

Wide range of projection lenses

123

378

78.8

15.5

111.8

0.751.121.582.334.30

Multiple lens options and very wide lens shift adjustment ranges
allow for flexibility in installations.

Technical specifications optix 3D

projector 16:9 DLP® projector

concept all glass optical design with replaceable

resolution 1920 x 1080 native

brightness up to 2700 ansi lumens

contrast about 7000 : 1 (adjusted)

bit planes / colour depth 12 bits per colour

I/O 2x Dual Link DVI, 2x HDMI,

colour management RealColor™ colour management suite

lenses (ranges to be
confirmed)

setup, calibration, control,
asset management

installation Table top or ceiling mount

conformances FCC Class A, CE, CUL

power requirements 8.4A 100-240V 50-60Hz, < 1050W

size ( H x W x D) 376 x 510 x 223 mm

weight about 12.5 kg / plus lens

warranty limited 3 years warranty. Up to five years extended

bandwith 330 MHz Dual Link DVI

operating temperature 0-40°C

projection lenses, lens shift, and mech. shutter

2x analogue RGBHV, analogue video

2x XPort™ TCP/IP, RS232, IR

Frame-lock sync in/out

0.8 : 1 (EN 42)

1.2 - 1.7 : 1 (EN 43)

1.7 - 2.5 : 1 (EN41)

2.5 - 4.6 : 1 (EN 44)

ProNet™ setup and calibration tool,

with built in asset management

warranty available. Conditions apply.

165 MHz HDMI

optix 3D

Head Oce:

Reginoal contacts:

head office

projectiondesign as

Habornveien 53

N-1630 Gamle Fredrikstad, Norway

ph [phone]

[e-mail]

The Americas

projectiondesign LLC

295 North Street,

Teterboro, NJ 07608, USA

ph [phone]

[e-mail]

UK and Ireland

7200 The Quorum

Oxford Business Park North

Oxford, OX4 2JZ
United Kingdom

Ph [phone]

[e-mail]

Germany - Germany, Austria, Swtizerland

Stuttgart,

Germany

ph [phone]

mo [phone]

Netherlands - Benelux region

Postbus 59,

4190CB Geldermalsen,

The Netherlands

ph [phone]

fx [phone]

Poland - Central and Eastern Europe

Choszczno,

PL 73-200,

Poland

ph [phone]

fx [phone]

South Africa - Africa, Israel

1 Peterhof Close,

Hout Bay 7806,

South Africa

ph + 27 21 79 00 018

fx [phone]

Singapore - Greater China

Block 161 Kallang Way,

#04-05 Kolam Ayer Industrial Estate,

Singapore 349247,

Singapore

ph [phone]

fx [phone]

India - SAARC Region

Mumbai,

India

ph [phone]

fx [phone]

© 2010 projectiondesign as. All rights reserved. All brands and trade names are the property
of their respective owners. Specifications subject to change without prior notice. All values
are typical and may vary. Please visit our website for latest specifications and product
offerings.

602-0760-00

Sweden - Sweden, Finland

Flöjelbergsgatan 7A

S-43137 Mölndal

Sweden

ph [phone]

fx [phone]

Italy - Italy, Southern Europe

Via Plinio 43,

I-20129 Milano (MI),

Italy

ph [phone]

fx [phone]

Spain – Spain, Portugal

Gorrondatxe 15, bajo A,

48640 Berango,

Spain,
ph 34 676 266 301
fx [phone]

www.avielo.com

Dubai - UAE and Middle East

PO Box 17633,

LOB 15 Office 212,

JAFZ,

Dubai

ph [phone]

mo [phone]

Panama - Central and South America

Paseo Del Mar,

Bayside, Suite 1301, costa Del Este,

Panama City,

Republic of Panama

ph [phone]

Hong Kong - Greater China, Taiwan

22/F Hing Yip Commercial Centre,

280 Des Voeux Road Central,

Hong Kong,

ph [phone]