Pro-ject Audio Debut 3 Phono USB Brochure

Product information

Pro-Ject Debut III/Phono USB

Manual turntable with fitted cartridge Ortofon OM 5E and integrated MM phono pre-amplifier with A/D converter and USB output

Turntable

 Chassis available in silver or matt black  A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.  The medium density fibre plinth stands on four feet which act as shock absorbers.  The motor is decoupled from the plinth to reduce vibration transmission.  The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.  The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass

bearing housing.

 External power supply avoids potential electro-mechanical interference.

Tonearm Pro-Ject 8.6

 The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.  Uniform material: the tonearm tube and bearing housing are constructed from aluminium.  The headshell and undamped armtube are fashioned from a single piece.  The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.  Flexible counterweight shaft avoids vibration at undesirable frequencies.  Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.  The straight armtube with an effective length of 8,6" reduces toe-in error.  The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.  The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated

phono sockets.

 A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III/ Phono to any line level/auxiliary

input (Computer, Midi System, Mixer etc.).

Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.

Phono Pre-amplifier

 Optimal channel separation through dual-mono circuitry  Digitalisation of analog signals for recording direct to disk via USB with suitable recording programs

 Runs on Windows™ and Mac OS™operating systems

Technical specifications Phono Pre-amplifier - A/D converter

Noise floor: 88dB THD: 0,005% Input impedance: 47kohms/100pF Power consumption: 16V/40mA AC Gain: 32dB Output voltage typically: 160mV/1kHz at 4mV/1kHz RIAA-equalisation curve accuracy: > 0,5dB/20Hz - 20kHz USB output: digital serial data protocol USB 1.1

The manufacturer reserves the right to alter the technical specifications without notice.

The unit may only be connected to a line level input.

Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger

1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697