Pro-ject Audio 2 Xperience Super Pack 2 Brochure

Product information

Pro-Ject 2 Xperience
SuperPack 1 & 2

Manual turntable with fitted cartridge
Ortofon MC Rondo Red or Ortofon MC Salsa
and Pro-Ject Speed Box

Turntable

 A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.
 The transparent acrylic plinth stands on three height-adjustable Sorbothane
 The motor is decoupled from the plinth to reduce vibration transmission.
 The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density

fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.

 The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered

bronze bearing housing.

 Electronic speed change for 33 /45 r.p.m.
 Connection to the phono input of the amplifier can be made with connecting cables of your taste through the

gold plated phono sockets and earth screw. A standard cable is provided.

 External power supply avoids potential electro-mechanical interference.

®

-damped aluminium cones.

Tonearm Pro-Ject 9c

 SuperPack 1: The turntable is supplied with Ortofon MC Rondo Red low output MC-cartridge fitted.

SuperPack 2: The turntable is supplied with Ortofon MC Salsa low output MC-cartridge fitted.

 Conical carbon-fibre armtube avoids standing wave reflections.
 Low mass aluminium headshell securely glued to armtube.
 The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.
 Flexible counterweight shaft avoids vibration at undesirable frequencies.
 Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
 Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
 The straight armtube with an effective length of 9" reduces toe-in error.
 Silicone-damped armlift can be adjusted to suit working height of the arm.
 The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated

phono sockets.

Dimensions W x H x D: With dust cover closed 460 x 133 x 360mm, dust cover open 460 x 390 x 460mm.
SuperPack 1, cartridge: Output voltage 0,30mV. Recommended load resistance > 10 ohms (MC-input).
SuperPack 2, cartridge: Output voltage 0,38mV. Recommended load resistance > 20 ohms (MC-input).

The manufacturer reserves the right to alter the technical specifications without notice.

Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger

1050 Vienna · Margareten Road 98 · Tel. [phone] · Fax. [phone]

www.project-audio.com · © Heinz Lichtenegger · Revision 1.12.08