Pro-ject Audio 2 Xperience Brochure

Product information

Pro-Ject 2 Xperience

Manual turntable

Turntable

 A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.  The transparent acrylic plinth stands on three height-adjustable Sorbothane  The motor is decoupled from the plinth to reduce vibration transmission.  The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density

fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.

 The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered

bronze bearing housing.

 Connection to the phono input of the amplifier can be made with connecting cables of your taste through the

gold plated phono sockets and earth screw. A standard cable is provided.

 External power supply avoids potential electro-mechanical interference.

-damped aluminium cones.

Tonearm Pro-Ject 9c

 Conical carbon-fibre armtube avoids standing wave reflections.  Low mass aluminium headshell securely glued to armtube.  The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.  Flexible counterweight shaft avoids vibration at undesirable frequencies.  The counterweight supplied is suitable for cartridges weighing between 6 - 9g. Alternative counterweights for

cartridges weighing between 10 - 15g, 9 - 11g or 4 - 6g are available as an accessory part.

 Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).  Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.  The straight armtube with an effective length of 9" reduces toe-in error.  Silicone-damped armlift can be adjusted to suit working height of the arm.  The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated

phono sockets.

Dimensions W x H x D: With dust cover closed 460 x 133 x 360mm, dust cover open 460 x 390 x 460mm.

The manufacturer reserves the right to alter the technical specifications without notice.

Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger

1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697