Pro-ject Audio 2.9 Wood Owners manual

INSTRUCTIONS FOR USE

PRO-JECT 2.9 Wood

&

PRO-JECT 2.9 Classic

2

PRO-JECT 2.9

Controls, features and connections

1 Motor transportation screw (marked red)
2 Stepped drive pulley
3 Drive belt *
4 Hub
5 Glass platter with felt mat or sandwich platter * (depending on version ordered)
6 Tonearm counterweight * 6a Downforce scale
7 Tonearm lift lever
8/18 Tonearm rest and removable transport lock
9 Tonearm tube
10 Lid *
11 Lid hinges
12 Hinge fasteners
13 Mains cable
14 Phono output sockets and earth connection
15 Anti-skating weight adjustment scale
16 Anti-skating weight *
17 Anti-skating weight support hoop
20 Mains switch
21 Headshell with optional finger lift *
22 Motor
23 Feet
Screw-down record clamp (not shown) *

Dear music lover,

thank you for purchasing a PRO-JECT AUDIO record player.
Our turntables set new standards and show how audiophile quality analogue reproduction may be achieved

with simple and cost effective means. The success of PRO-JECT record players and many customer's comments
have lead us to develop a mechanically more advanced model based on the PRO-JECT 2. The PRO-JECT 2.9
is characterized by its special finish plinth, the use of a low-resonance platter and the PRO-JECT 9 tonearm.

In order to achieve maximum performance and reliability with this record player you should study these
instructions for use carefully.

During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable
receptacle.
Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered
in the technical drawings above. Separately packed items are marked with an asterisk *.

3