Pro-ject Audio 10-CC Evolution Brochure

Product information

Pro-Ject 10cc Evolution

10" precision tonearm with carbon-fibre armtube

The tonearm's design efficiently leads parasitic vibrations away from the cartridge into the mounting board,

guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical

and horizontal tracing due to the following constructional details:

 The headshell and armtube are fashioned from a single piece of carbon-fibre.  Conical armtube avoids standing wave reflections.

 Inverted bearing design with four ABEC7 spec ballraces.  Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.  Sorbothane  Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped

records.

 Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).  Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.  Straight armtube reduces toe-in error.  Silicone-damped armlift can be adjusted to suit arm height.

 The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated

phono sockets.

 Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw.

-damped counterweight effectively counteracts unwanted resonances.

Technical specifications

Headshell: 0,5” (12,7mm) standard Mounting distance: 238mm (platter  tonearm base) Supplied counterweight: suitable for cartridges weighing between 4 - 6g, 5 - 8g, 6 - 10g and 8 - 15g Downforce range: 10 - 35mN Effective length: 10” (254mm) Effective mass: 8,5g Overhang: 16mm Weight: 269g (without counterweight)

The manufacturer reserves the right to alter the technical specifications without notice.

Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger

1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697