Pro-Ject CD Box User Manual

INSTRUCTIONS FOR USE

Pro-Ject CD Box

Dear music lover,

thank you for purchasing a PRO-JECT AUDIO CD Box.

In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Help to protect the environment

If you are not going to use the player for an extended period of time, e.g. vacation, we suggest to disconnect it from the AC mains. Please be certain that the player is in standby-mode prior to unplugging the power supply from the AC mains.

Caution! Laser diode

This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

Discs to avoid

If a disc is cracked, chipped, warped, or otherwise damaged, don't risk to play it. You could end up damaging the unit. recommended. The manufacturer and the distributor disclaims all liability arising in connection with the use of damaged or shaped discs.

This player is designed for use with fully circular, full size CDs only. Use of shaped discs is not

Connectors

Out

Left

Right

Make all connections whilst the converter is disconnected from the power supply.

Take care to connect the left and right channels correctly. The right channel is usually marked red, the left channel black or white.

Connection to the amplifier

Connect the Out socket to a line input (such as AUX) on your amplifier.

Mains power connection

The unit is supplied with a power supply suitable for your country's mains supply. Check the label before connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the power supply to the Power ~16V socket before connecting the power supply to the mains.

+ 3 hidden pages