INSTRUCTIONS FOR USE
Pro-Ject 1 Xpression Carbon Classic
2 |
© Pro-Ject Audio Systems · Pro-Ject 1 Xpression Carbon Classic / Ortofon 2M SILVER · Revision 2014.02.25 |
|
Pro-Ject 1 Xpression Carbon Classic
Controls, features and connections
1 Motor brackets with ORTOFON® pads
2Stepped drive pulley
3 |
Drive belt * |
3a Hook * |
4Hub
5Platter *
6 |
Tonearm counterweight * |
6a Downforce scale |
7Tonearm lift lever
8/18 |
Tonearm rest and removable transport lock |
|
9 |
Tonearm tube |
9a Tonearm base |
10Lid *
11Lid hinges
12Hinge fasteners
13Power supply socket
14Phono output sockets and earth connection
15Anti-skating weight adjustment scale
16Anti-skating weight *
17Anti-skating weight support hoop
20Power switch
21Headshell with finger lift and optional fitted cartridge Ortofon 2M Red
22Motor
23Adjustable tip-toe feet with anti-scratch cups * Connection cable (not shown) *
Power supply (not shown) * Universal adapter (not shown) *
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO record player.
In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
The record player is supplied with a factory fitted and adjusted cartridge as an option.
** The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a different model at a later date.
During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable receptacle. Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered in the technical drawings above. Separately packed items are marked with an asterisk *.
© Pro-Ject Audio Systems · Pro-Ject 1 |
Xpression Carbon Classic / Ortofon 2M SILVER · Revision 2014.02.25 |
3 |
|
Loading...