Pro-Ject Bluetooth Box E User Manual

Pro-Ject Bluetooth Box E

INSTRUCTIONS FOR USE

Dear music lover,
make sure that
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power
ever place any naked flame sources, such as lighted candles on or near the device. The product
Take care to connect the left and right channels correctly. The right channel is usually marked red,
!
!
!
thank you for purchasing a Pro-Ject Audio Systems Bluetooth Box E.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, the voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily accessible at all times. Never handle the device, the power supply while your hands are wet or damp.
supply. N shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the converter is disconnected from the power supply.
the left channel black or white.
Never use any other power supply than the one supplied with the unit.
Connection to the amplifier
Connect the Analog Out socket to a line input (such as AUX) on your amplifier. Alternatively you can use also digital
Optical Out to connect the unit to a D/A converter or to digital input of your amplifier or AVR.
Mains power connection
Connect the low voltage plug from the power supply to the Power5VDC socket before connecting the power supply to the mains.
Bluetooth pairing
Pairing with Android devices
© Pro-Ject Audio Systems · Pro-Ject Bluetooth Box E · Revision 2014.4.10
Open Settings and tap on Bluetooth. Turn on Bluetooth and tap on Scan. Searched devices will show up. Tap on Audio", now you can play music from your Android device over Bluetooth to Bluetooth Box E.
Pairing with Apple devices Tap on available devices. Tap on "Music Receiver" and it will be connected to the Bluetooth Box E. Now you can play music.
Reconnecting If you move out of range or turn off Bluetooth, Bluetooth Box E will disconnect from your device. To reconnect simply open the Bluetooth manager and tap on "Music Receiver". If the signal is lost for less than 15 seconds it can reconnect automatically - typically if you move out of the range and then return back.
Adding a new phone or tablet The unit can play music from one device at a time, but it is capable of being paired to up to 8 devices. If you want to switch from one device to another, you have to disconnect existing connection to Bluetooth Box E and then follow the steps for pairing.
Troubleshooting
No music from speakers:
- make sure the Bluetooth Box E is powered
- make sure an audio cable or an optical cable is correctly connected to Bluetooth Box E
- make sure you are within the range
- make sure the Bluetooth is enabled and the device is connected to Bluetooth Box E. Volume level is properly set
"Music Receiver" (Enter "0000" if requested). Once paired it will show "Connected to media
Settings, tap on Bluetooth, turn on Bluetooth, your device will automatically start searching for
Technical specifications Pro-Ject Bluetooth Box E
Effective range of wireless signal up to 10m in case of direct visibility
Line-level output: 1 x jack 3,5mm
Output voltage: 2Vrms
®
Digital outputs: 1 x optical (TOSlink
Supported codecs: aptX, SBC, A2DP Bluetooth profile
Outboard power supply: 5V/0,6A DC
Power consumption: 300mA DC,<1W in standby
Dimensions W x H x D (D with sockets): 120 x 32 x 100 mm
Weight: 250g without power supply
)

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should be sent to the responsible distributor in your country.
© Pro-Ject Audio Systems · Pro-Ject Bluetooth Box E · Revision 2014.4.10
4
Warranty
o these
changes to any part of the product by unauthorized persons
Pro-Ject Audio Systems is a Registered Trademark of
The information was correct at the time of going
The manufacturer accepts no responsibility for damage caused by not adhering t instructions for use. Modification or release the manufacturer from any liability over and above the lawful rights of the customer.
Copyright, trademarks
H. Lichtenegger. This guide was produced by: Pro-Ject Audio Systems Copyright
©
2014. All rights reserved.
TOSlink® is a registered trademark of Toshiba Corporation.
to press. The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.
© Pro-Ject Audio Systems · Pro-Ject Bluetooth Box E · Revision 2014.4.10
Loading...