Pro-Ject 2Xperience Acryl User Manual

INSTRUCTIONS FOR USE

Pro-Ject 2 Xperience Acryl

Pro-Ject 2 Xperience Classic

5

2

Pro-Ject 2 Xperience Acryl / Classic

Controls, features and connections

1 Motor transport locks 2 Stepped drive pulley 3 Drive belt * 3a Hook * 5 Sandwich platter * 6 Tonearm counterweight * 6a Downforce scale 7 Tonearm lift lever 8/18 Tonearm rest and removable transport lock 9 Tonearm tube 9a Tonearm base 10 Lid * 11 Lid hinges 12 Hinge fasteners 13 Power supply socket 14 Phono output sockets and earth connection 15 Anti-skating weight adjustment scale 16 Anti-skating weight * 17 Anti-skating weight support hoop 20 Power switch 21 Headshell with finger lift and optional fitted cartridge Ortofon 2M Red 22 Motor 23 Adjustable tip-toe feet with anti-scratch cups *

Screw-down record clamp (not shown) * Connection cable (not shown) * Power supply (not shown) * Single adapter (not shown) *

Dear music lover,

thank you for purchasing a PRO-JECT AUDIO record player.

In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully.

!

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

The record player is supplied with a factory fitted and adjusted cartridge as an option. ** The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a different model at a later date.

During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable receptacle. Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered in the technical drawings above. Separately packed items are marked with an asterisk *.

3