Pro-Ject 1Anniversary User Manual

INSTRUCTIONS FOR USE

Pro-Ject 1 Anniversary

2

13

© ATR-Audio Trade GmbH · Pro-Ject 1 Anniversary/Ortofon Super OM 10 · Revision 2011.10.01

PRO-JECT 1 Anniversary

Controls, features and connections

1 Motor transportation screw (marked red)
2 Stepped drive pulley
3 Drive belt * 3a Hook *
4 Hub
5 Platter with felt mat *
6 Tonearm counterweight * 6a Downforce scale
7 Tonearm lift lever
8 Tonearm rest and removable transport lock
9 Tonearm tube 9a Tonearm base
10 Lid *
11 Lid hinges
12 Hinge fasteners
13 Power supply socket
14 Signal output cable
15 Anti-skating weight adjustment scale
16 Anti-skating weight *
17 Anti-skating weight support hoop
20 Power switch
21 Headshell with finger lift and fitted cartridge Ortofon Super OM 10
22 Motor

Power supply (not shown) *
Single adapter (not shown) *

Dear music lover,

thank you for purchasing a PRO-JECT AUDIO record player.

In order to achieve maximum performance and reliability with this record player you should study these instructions
for use carefully.

!

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

The record player is supplied with a factory fitted and adjusted cartridge as an option.
** The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a
different model at a later date.

During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable
receptacle. Before starting assembly make yourself acquainted with the parts listed above and correspondingly
numbered in the technical drawings above. Separately packed items are marked with an asterisk *.

© ATR-Audio Trade GmbH · Pro-Ject 1 Anniversary/Ortofon Super OM 10 · Revision 2011.10.01

3