Progear 1307.7-110216 User Manual
IMPORTANT: Read all the instructions carefully before using this product. Retain
Air Elliptical
1307.7-110216
this owner’s manual for future reference.
The specifications of this product may vary from this photo and, subject to change without
notice.
PLEASE DO NOT RETURN THIS PRO DUCT TO THE STORE.
If you need help with Product inf ormation, assembly, or
replacement parts. Please contact Custom er Service.
Em
ail us at:
Service@paradigmhw.com
Hours: 8:00 AM to 5:00 PM (PST) Daily
Or call us at:
1-844-641-7920
TABLE OF CONTENTS
1
SERVICE ---------------------------------------------------------------------------- 2
LABEL PLACEMENT ------------------------------------------------------------- 3
IMPORTANT SAFETY GUIDELINES ------------------------------------------ 4
OVERVIEW DRAWING ------------------------------------------------------------ 5
PARTS LIST -------------------------------------------------------------------------- 6
HARDWARE & TOOLS PACK --------------------------------------------------- 8
ASSEMBLY --------------------------------------------------------------------------- 10
COMPUTER CONSOLE ---------------------------------------------------------- 22
TENSION ADJUSTMENT --------------------------------------------------------- 23
LEVEL ADJUSTMENTS ----------------------------------------------------------- 24
MOVING THE ELLIPTICAL EQUIPMENT ------------------------------------ 25
MAINTENANCE --------------------------------------------------------------------- 26
TROUBLE SHOOTING ------------------------------------------------------------ 27
WARRANTY -------------------------------------------------------------------------- 29
PARTS REQUEST FORM -------------------------------------------------------- 30
2
LABEL PLACEMENTSERVICE
IMPORTANT: FOR NORTH AMERI C A ONLY
For damaged or defective pr oduc t , questions, replacement parts or
any other service support, please contact our customer service
department (8:00 AM - 5:00 PM Pacific Standard Time, Daily) by the
below methods:
For The Best Service, please Email:
Service@paradigmhw.com*
Response Time: 1-2 Business Days
Website:
www.paradigmhw.com**
Toll-Free:
1-844-641-7920
sponse time may vary via calling.
Re
Please have the following information ready when requesting for service:
• Your name
• Phone numbe r
• Model number
• Serial number
• Part numbe r
• Proof of Purchase
mailing us with the information above will be the bes
*E
t
me
thod to receive a response during peak business hours.
Response time may vary.
**
damaged or defective product plea s e cont a c t our customer
For
service before returning to the store.
Paradigm Health & Wellness, Inc.
1189 Jellick Ave.
City of Industry, CA 91748, USA
LABEL PLACEMENT
3
asic precautions should always be followed, including the following safety
IMPORTANT SAFETY GUIDELINES
B
instructions when using this equipment. Read all the instructions befo re using this
equipment.
1. Before exercising and to avoid injuring your muscles, it is highly recommended that
you perform warm-up exercises for each muscle group.
2. Make sure all the components are not damag ed and are in working order before
using. This equi pm ent should be placed on a stable, flat sur face . Using a mat or
similar material on the ground is recommended.
3. Please wear proper fitness apparel when using this equipment. Do not wear loose
clothing or accessories that may get caught by any part of the equipment.
4. Only perform maintenance or adjustments that are instructed in this manual. Should
any problems arise, discontinue usage of the equipment and consult with our
customer service.
5. Be careful when stepping on or stepping off the pedals. Always hold onto the
handlebars first and step on the pedals when they are closest to the ground.
6. With your other leg, swing over the main frame and come to rest onto the other
pedal. To ensure the p edals r un s m oot hly, push or pull on th e handlebars first before
testing the leg motions. To dismount, reduce pedaling speed gradually before you
stop. When stepping off the machine, make sure you step off one leg at a time. One
leg should be on a pedal at its lowest while the other leg dismounts slowly off the
other pedal. Hold onto the eq uipm ent for balance while fully dismounting.
7. Keep dry. Do not operate the equipment in wet or moist condition. Do not use the
equipment outdoors. This equipment is for household use only.
8. Only one person s ho uld b e on the equi pment at a ti me. Keep children and pe ts aw ay
from the product at all times. This mac hi ne is des i g ned for adul ts only.
9. This product requires a minimum of 6 feet of space in radius for safe operation.
10. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop
exercising immediately and consult with your physician before continuing.
The maximum weight capacity for this product is 275 lbs/125 kgs.
WARNING: Before beginning any exercise program consult your physician.
This is especially important for the people who are over 35 years old or who have
pre-existing health problems.
CAUTION: Read all instructions carefull y before operating this product.
Retain this Owner’s Manual for future reference.
4
5
OVERVIEW DRAWING
No.
Description
Qty
No.
Description
Qty
001
Handrail Arm End Cap Ø25
2
023
Bolt M8x43
4
Right Handrail Arm
Ø25x1.8x990
Handrail Arm Foam Grip
Ø24xØ34x280
Handrail Arm Plastic Bushing
Ø32x1.5
005
Bolt M10x18
2
027
Spring Washer Ø20xØ13x2
2
006
Spring Washer Ø10xØ18x3
2
028
Nylon Nut for Right Crank 1/2”
1
007
Washer Ø28xØ16xδ5
2
029
Computer Console M1202
1
Powder Metal Bushing
Ø24.5xØ16x14
Hand Pulse Handlebar End Cap
Ø25x1.5
009
Right Handrail
1
031
Hand Pulse Sensor
2
Extension Sensor Wire
L=650 mm
Hand Pulse Handlebar Foam Grip
Ø24xØ30x240
011
Bolt M10x55
2
033
Hand Pulse Handlebar
1
012
Handrail End Cap Ø32x1.5
2
034
Wire Grommet Ø12.1
2
Serrated Lock Was her External
Teeth Ø10
Hand Pulse Sensor Wire
L=500 mm
014
Nylon Nut M10
6
036
Spring Washer Ø8
4
015
Foot Bar End Cap 30x30x1.5
2
037
Tension Control Knob
1
Powder Metal Bushing
Ø14xØ10x10
017
Right Foot Bar
1
039
Carriage Bolt M8x35
2
Foot Pedal Support Bracket
245x38xδ3.0
Hand Pulse Handlebar Support
Frame
Hand Pulse Handlebar Support
Frame End Cap 30x20x2.0
020
Bolt M10x45
4
043
Cover Cap Ø25
2
Right Bolt for Right Crank
Ø16x89xL23
022
Wave Washer Ø28xØ17x0.3
4
045
Nut M10x1xB5
2
PARTS LIST
002
003
004
008
010
013
1
2
2
10
1
2
024 Washer Ø8 8
025 Nylon Nut M8 4
026 Right Crank 6.7" 1
030
032
035
2
2
2
016
018
019L Left Foot Pedal 349x150x56 1
019R Right Foot Pedal 349x150x56 1
021
4
2
1
038 Bolt M5x15 2
040 Bottle Holder 1
041
042
044 Eyebolt M6x33 2
1
2
6
No.
Description
Qty
No.
Description
Qty
046
Tension Bracket
2
074
Nut 7/8"
1
047
Bolt M8x38
8
075
Left Crank 6.7"
1
048
Nut M6
2
076
Left Foot Bar
1
049
Fan Wheel Ø503x85
1
077
Left Handrail
1
Fan Wheel Axl e
M10x1xL150xL25xL40
051
Spacer Ø16xØ10x20
1
079
Tension Cable L=1020 mm
1
052
Bolt M10x57
4
080
Cap Nut M8
6
053
Front Stabilizer End Cap Ø50
2
081
Big Curve Washer Ø8xØ20x2
6
054
Front Stabilizer Ø50x1.5
1
082
Flange Nut M10x1xB10
2
055
Curve Washer Ø10xØ25x2
4
083
Right Cover 705x362
1
056
Cap Nut M10
4
084
Left Cover 705x362
1
057
Adjustable Leveler M8x45
2
085
Chain
1
058
Nut M8
2
086
Screw ST4.2x20
2
059
Mainframe
1
087
Nylon Nut for Left Crank 1/2”
1
060
Rotation Rod Ø15.8x376
1
088
Nut Cap S16
4
061
Rear Stabilizer End Cap Ø50
2
089
Small Magnet Ø15x7
1
062
Rear Stabilizer Ø50x1.5x540
1
090
Left Handrail Arm Ø25x1.8x990
1
063
Tension Strap 1150x18
1
091
Crank Cover Ø22
2
Left Bolt for Left Crank
Ø16x89xL23
065
Screw ST4.8x40
7
093
Transp ort Wheel Ø23xØ6x32
2
S Phillips Self Drilling Screw
ST4.8x20
067
Chain Pulley
1
095
Plastic Clip 20
1
068
Washer Ø40x24x3
1
096
Flange Nut M10x1.25
2
069
Bearing Nut II 15/16"
1
097
Nut Cap S18
2
070
Bearing
2
098
Spring Ø12x1.8x32
1
071
Bearing Cup
2
099
Round Plug Ø25x1.5
4
Cross Recessed Pan Head Screw
M5x15
073
Washer Ø34.5x23x2.5
1
101
Clip
1
PARTS LIST
050
064
066
1
1
3
078 Sensor with Wire L=900 mm 1
092 Bolt M6x45 2
094 Nylon Nut M6 2
072 Bearing Nut I 7/8" 1
100
7
1
HARDWARE & TOOLS PACK
8
Loading...