ProForm Interactive Ergometer PFEVEX62832, 765 Tr Bike, 765 TR InteractiveErgometer, Interactive Ergometer 765 TR User Manual
USER’S MANUAL
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Serial Number Decal
(beneath stabiliser)
Model No. PFEVEX62832
Serial No.
Write the serial number in the
space above for reference.
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:
Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
08457 089 009
Class HA Fitness Product
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
PROFORM is a registered trademark of ICON IP, Inc.
3
1. Read all instructions in this manual before
using the exercise cycle.
2. Use the exercise cycle only as described in
this manual.
3. It is the responsibility of the owner to ensure
that all users of the exercise cycle are adequately informed of all precautions.
4. The exercise cycle is intended for home use
only. Do not use the exercise cycle in
a commercial, rental, or institutional setting.
5. Place the exercise cycle indoors on a level
surface. Keep the exercise cycle away from
moisture and dust. Place a mat under the
exercise cycle to protect the floor.
6. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
7. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
8. Wear appropriate clothing when exercising;
do not wear loose clothing that could
become caught on the exercise cycle. Always
wear athletic shoes for foot protection.
9. The exercise cycle should not be used by
persons weighing more than 115 kg (250
lbs.).
10. The pulse sensor is not a medical device.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
11. Always keep your back straight when using
the exercise cycle; do not arch your back.
12. If you feel pain or dizziness whilst exercising,
stop immediately and cool down.
13. The decal shown below has been placed on
the exercise cycle. If the decal is missing, or
if it is not legible, call our Customer Service
Department at 08457 089 009 and order a free
replacement decal. Apply the decal in the
location shown.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precau-
tions before using the exercise cycle.
4
Congratulations for selecting the new PROFORM
®
765 TR exercise cycle. Cycling is one of the most
effective exercises for increasing cardiovascular fitness, building endurance, and toning the entire body.
The 765 TR exercise cycle offers an impressive array
of features to let you enjoy this healthful exercise in
the convenience and privacy of your home.
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please call our Customer
Service Department at 08457 089 009. To help us
assist you, please note the product model number
and serial number before calling. The model number
is PFEVEX62832. The serial number can be found on
a decal attached to the exercise cycle (see the front
cover of this manual).
Before reading further, please familiarise yourself with
the parts that are labeled in the drawing below.
BEFORE YOU BEGIN
Handgrip Pulse Sensor
REAR
Seat
Seat Lever
Pedal/Strap
Wheel
Leveling Foot
Console
Fan
Power Jack
CD Holder
CD Player
Handlebar
Water Bottle Holder*
*No bottle is included
Adjustment Knob
RIGHT SIDE
Backrest
5
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable spanner and Phillips
screwdriver .
Use the drawings below to identify the small parts used for assembly. The number in parenthesis below each
drawing is the key number of the part, from the PART LIST on pages 28 and 29. The number following the key
number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part
is not in the parts bag, check to see if it has been pre-assembled.
1. Orient the Front Stabiliser (15) as shown. Whilst another person lifts the front of the Frame (1), attach the
Front Stabiliser to the Frame with two M8 x 52mm
Button Screws (54) and two M8 Washers (64).
15
54
64
1
1
M8 Nylon
Locknut (49)–4
M6 x 16mm Tapered
Button Screw (102)–8
M8 x 25mm Button
Screw (40)–4
M6 Washer
(66)–4
M6 x 16mm Button
M8 Washer
(64)–2
Screw (8)–4
M8 x 38mm Button
Bolt (96)–4
M4 x 12mm
Screw (41)–6
M6 x 22mm Button
Screw (93)–3
M4 x 16mm
Screw (57)–6
M8 x 52mm Button
Screw (54)–2
M4 x 20mm
Screw (101)–1
M6 x 25mm Button
Screw (99)–1
6
2
2
Make sure the
wire harnesses
do not get
pinched and
damaged during
this step.
20
43
1
99
42
2. Whilst another person holds the Upright (2) in the posi-
tion shown, connect the Upper Wire Harness (42) to
the Lower Wire Harness (43). Gently pull the upper
end of the Upper Wire Harness to remove any slack
from the Wire Harnesses.
Turn the indicated Adjustment Knob (20) counterclockwise two or three turns to loosen it. Next, pull the Knob,
insert the Upright (2) into the Frame (1), and then
release the Knob. Be careful to avoid pinching the
Wire Harnesses (42, 43). Move the Upright up and
down slightly until the pin on the Knob snaps into
one of the holes in the Upright. Then, turn the Knob
clockwise until it is tight. Tighten the M6 x 25mm
Button Screw (99) into the Frame.
3. Attach the Left Inner Handlebar (71) to the Upright (2)
with four M6 x 16mm Tapered Button Screws (102).
Attach the Right Inner Handlebar (68) to the
Upright (2) in the same way.
3
71
2
102
102
68
4. Attach a Handlebar (3) to the Seat Bracket (11) with
two M8 x 38mm Button Bolts (96) and two M8 Nylon
Locknuts (49). Make sure that the Nylon Locknuts
are resting in the hexagonal holes in the front of
the Handlebar.
Attach the other Handlebar (3) to the Seat Bracket
(11) in the same way.
11
3
3
96
49
4
7
5. Attach the Seat (9) to the Seat Bracket (11) with four
M6 x 16mm Button Screws (8) and four M6 Washers
(66).
5
9
11
66
8
8
66
6. Attach the Backrest (90) to the Seat Bracket (11) with
three M6 x 22mm Button Screws (93).
11
93
90
6
7. Push down the handle (not shown) on the right side of
the Seat Carriage (10), slide the Seat Carriage into the
Frame Rail (81), and then pull the handle back up.
Attach a Bumper (82) to the Frame Rail (81) with an
M4 x 20mm Screw (101). Next, press the Frame Rail
Endcap (83) into the end of the Frame Rail.
10
83
81
82
101
7
8
9. See step 10. Remove the three indicated M4 x 12mm
Screws (41) and the Left and Right Handlebar Covers
(6, 5) from the Console (4).
With the help of another person, carefully raise the
exercise cycle so it is resting on the Front and Rear
Stabilisers (not shown).
Whilst another person holds the Console (4) in the
position shown, connect the wire harnesses on the
Console to the Upper Wire Harness (42) and the
Pulse Wire Harness (106). Insert the excess wire harness down into the Upright (2).
Attach the Console (4) to the Upright (2) with four M4
x 12mm Screws (41). Be careful to avoid pinching
the wire harnesses.
10. Attach the CD Holder (104) to the Console (4) with
two M4 x 12mm Screws (41) as shown.
Attach the Left Handlebar Cover (6) to the Console (4)
with three M4 x 16mm Screws (57).
Attach the Right Handlebar Cover (5) to the
Console (4) in the same way.
9
4
2
41
57
5
4
104
41
6
10
Wire
Harnesses
42
106
8. With the help of another person, carefully tip the
exercise cycle onto its left side so it is resting on the
Left Inner Handlebar (not shown).
Identify the Left Rear Stabiliser (16), which is marked
with an “L” sticker. Attach the Left Rear Stabiliser and
the Stabiliser Plate (87) to the Frame (1) with two M8
x 25mm Button Screws (40) as shown;
do not tighten
the Button Screws yet.
Insert the Right Rear Stabiliser (98) between the
Stabiliser Plate (87) and the Frame (1). Attach the
Right Rear Stabiliser with two M8 x 25mm Button
Screws (40). Tighten all four Button Screws.
40
87
40
1
8
98
16
9
13. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
11. Identify the Left Pedal (22), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal
counterclockwise
into the Left Crank Arm
(24). Tighten the Right Pedal (not shown)
clockwise
into the Right Crank Arm. Important: Tighten both
Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. For
best performance, the Pedals must be kept tightened.
Adjust the Left Pedal Strap (25) to the desired position, and press the end of the Pedal Strap onto the tab
on the Left Pedal (22).
Adjust the Right Pedal Strap (not shown) in the
same way.
12. Plug one end of the Power Cord (52) into the jack at
the front of the exercise cycle. Plug the other end of
the Power Cord into an appropriate outlet that is properly installed in accordance with all local codes and
ordinances. Note: In the UK, use the included adapter
(not shown) with the Power Cord.
Note: The console can be operated with batteries
instead of the Power Cord (52) if desired. To install
batteries, follow the instructions below.
See the inset drawing. Press the indicated tab on the
battery drawer and pull the battery drawer down.
Press four “D” batteries into the battery clips; make
sure that the batteries are oriented as shown by
the markings inside of the battery clips. Then,
close the battery drawer. Note: Alkaline batteries are
recommended.
11
24
25
Ta b
Batteries
Battery
Drawer
22
12
52
4
Ta b
10
INSTALLING THE RECEIVER FOR THE OPTIONAL CHEST PULSE SENSOR
If you have purchased the optional chest pulse sensor (see page 23), follow the steps below to install
the receiver included with the chest pulse sensor.
1. Look under the housing (A) and locate the two
recessed screws (B). Remove the two screws, and
remove the lid (C) from the housing. Set the lid and
the screws aside.
2. Gently remove the housing (A) from the Upright (2)
and the Water Bottle Holder (31).
3. See the bottom drawing. Wrap the wires (D) on the
receiver (E) lengthwise around the receiver as shown.
Make sure that the wires and the connector do not
touch the small cylinder.
4. Hold the receiver (E) so the small cylinder is oriented
as shown, and carefully insert the receiver into the
housing (A). Attach the receiver to the housing with the
two screws (F) included with the chest pulse sensor.
5. Locate the indicated wires (G) inside of the housing
(A). Pull the end of the wires out of the housing and
connect it to the wires (D) on the receiver (E). Make
sure that the connectors snap together.
6. Gently feed the wires into the Upright (2) and insert the
housing (A) into the Upright. Be careful to avoid
pinching the wires.
7. Reattach the lid (C) and the housing (A) to the Water
Bottle Holder (31) with the two screws (B). Note: The
wires included with the chest pulse sensor are not
needed and may be discarded.
D
E
Connector
Small
Cylinder
2
C
A
31
E
D
F
B
G
11
HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE SEAT
For effective exercise, the seat should be in the proper
position. As you pedal, there should be a slight bend in
your knees when the pedals are all of the way forward.
To adjust the seat, push the seat lever down, slide the
seat forward or backward, and then firmly pull the seat
lever back up.
HOW TO ADJUST THE UPRIGHT
The upright can be
adjusted to the
height that is the
most comfortable for
you. To adjust the
upright, first turn the
indicated knob
counterclockwise
two or three turns to
loosen it (if the knob
is not loosened
enough, it may
scratch the upright).
Next, pull the knob,
slide the upright to the desired height, and then release
the knob. Move the upright up and down slightly
until the pin on the knob snaps into one of the
holes in the upright. Then, turn the knob clockwise
until it is tight.
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal
straps, first pull the
ends of the straps
off the tabs on the
pedals. Adjust the
straps to the
desired position,
and then press the
ends of the straps
back onto the tabs.
Pedal
Strap
Knob
Seat
Lever
Seat
Upright
Ta b
12
FEATURES OF THE CONSOLE
The advanced console offers a selection of features
designed to make your workouts more enjoyable and
effective. When the manual mode of the console is
selected, the resistance of the pedals can be changed
with the touch of a button. As you work out, the console will provide continuous exercise feedback. You
can even measure your heart rate using the built-in
handgrip pulse sensor or the optional chest pulse sensor (see page 23).
The console also offers six Smart programs. Each program automatically changes the resistance of the pedals and prompts you to increase or decrease your pace
as it guides you through an effective workout. In addition, the console features two Heart Rate programs
that change the resistance of the pedals and prompt
you to vary your pace to keep your heart rate near a
target heart rate whilst you exercise. The console also
features a Watts program that changes the resistance
of the pedals to keep your power output near a target
level during your workout.
In addition, the console features iFIT.com interactive
technology. Having iFIT.com technology is like having a
personal trainer in your home. Using the built-in CD
player, you can play special iFIT.com CD programs.
iFIT.com CD programs automatically control the resistance of the pedals and prompt you to vary your pace
whilst a personal trainer coaches you through every
step of your workout. High-energy music provides
added motivation. To purchase iFIT.com CDs, visit
our Web site at www.iconeurope.com.
Using the included audio cable, you can also connect
the exercise cycle to your VCR and TV and play
iFIT.com video programs. iFIT.com video programs
offer the same benefits as iFIT.com CD programs, and
allow you to enjoy breathtaking scenery whilst you
exercise. To purchase iFIT.com videocassettes,
visit our Web site at www.iconeurope.com.
You can even connect the exercise cycle to your home
computer, go to our Web site at www.iFIT.com, and
access programs directly from our Web site. Explore
www.iFIT.com for more information.
13
To use the manual mode of the console, see the
instructions below. To use a Smart program, see
page 15. To use a Heart Rate program, see page
16. To use the Watts program, see page 18. To use
an iFIT.com CD program, see page 19. To use an
iFIT.com video program, see page 22. To use a program directly from our Web site, see page 23.
HOW TO USE THE MANUAL MODE
Turn on the console.
Make sure that the transformer is plugged in or
that batteries are installed in the console (see
assembly step 12 on page 9).
To turn on the console, press the On/Reset button
or begin pedaling. (The On/Reset button is the
button above the left side of the large display.)
Select the manual mode.
Each time the console is
turned on, the manual
mode will be selected. If a
program has been selected, reselect the manual
mode by pressing the
Program button repeatedly until the letters RPM
appear in the small display.
Begin pedaling and change the resistance of
the pedals as desired.
As you pedal, change the resistance of the pedals by pressing the Resistance + and – buttons.
There are ten resistance levels; level 10 is the
most challenging. Note: After the buttons are
pressed, it will take a few seconds for the resistance to reach the selected level.
Follow your progress with the large display and
the small display.
The upper section of the large
display will
show the distance you have
pedaled and the
numbers of
calories
and
fat calories
you have
burned (see FAT BURNING on page 25). The display will change from one number to the next
every few seconds. When you use the handgrip
pulse sensor or wear the optional chest pulse
sensor, the display will also show your heart rate
(see step 5 on page 14).
The centre of the
large display will
show the elapsed
time and your
pedaling pace (in
minutes per mile).
The display will change from one number to the
other every few seconds. Note: When a program
is selected (except for the Watts program and
Heart Rate program 2), the display will show the
time remaining in the program instead of the
elapsed time.
The lower section of the large
display will show
your pedaling
speed, your pedaling pace (in revolutions per minute), and the resistance level.
The display will change from one number to the
next every few seconds.
Note: The console can show
speed and distance in either
miles or kilometers. The letters
MPH or KM/H will appear in the lower section of
the large display to show which unit of measurement is selected. To change the unit of measurement, first hold down the Program button for a few
seconds. An E (for English) or an M (for metric) will
appear in the lower section of the large display.
Press the Resistance + button to change the unit
of measurement. Then, press the On/Reset button.
Note: When the batteries are replaced, it may be
necessary to reselect the desired unit of measurement.
The small display will
show your pedaling pace
(in revolutions per minute).
The indicator bar in the
small display will increase
or decrease in length as
you increase or decrease
your pedaling pace.
4
3
2
1
Indicator Bar
14
To reset the displays, press the On/Reset button.
Measure your heart rate if desired.
You can measure your heart rate using the built-in
handgrip pulse sensor or the optional chest pulse
sensor. To use the handgrip pulse sensor, follow
the instructions below. Note: If you wear the
chest pulse sensor and hold the handgrip
pulse sensor at the same time, the console
will not display your heart rate accurately.
If there are
thin sheets of
plastic on the
metal contacts
on the handgrips, peel off
the plastic. To
use the handgrip pulse sensor, hold the
handgrips with
your palms
resting against
the metal contacts. Avoid moving your hands
or squeezing the handgrips too tightly; excessive movement or pressure may interfere with
heart rate readings. When your pulse is detect-
ed, the heart-shaped indicator in the large display
will flash each time your heart beats, and your
heart rate will be shown.
For the most accurate heart rate reading, continue
to hold the handgrips for about 30 seconds. Note:
When you first hold the handgrips, the large dis-
play will show your heart rate continuously for 30
seconds. The display will then show your heart
rate along with other feedback modes.
Turn on the fan if desired.
To turn on the fan at low speed, press the fan button. To turn on the fan at high speed, press the
fan button a second time. To turn off the fan,
press the fan button a third time. Note: If the fan is
turned on but the pedals are not moved for thirty
seconds, the fan will automatically turn off.
Rotate the thumb
wheel on the
right side of the
fan to pivot the
fan to the
desired angle.
When you are finished exercising, the console
will automatically turn off.
If the pedals are not moved for a few seconds,
the displays will pause and the time will flash in
the large display. If the pedals are not moved and
the console buttons are not pressed for a few
minutes, the console will turn off to conserve the
batteries.
7
6
5
Metal
Contacts
Thumb Wheel
15
Each Smart program will automatically change the
resistance of the pedals and prompt you to increase or
decrease your pace as it guides you through an effective workout. Programs 4 and 5 are weight loss programs, programs 6 and 7 are aerobic programs, and
programs 8 and 9 are high-performance programs.
Follow the steps below to use a Smart program.
Turn on the console.
See step 1 on page 13.
Select one of the Smart programs.
Each time the console is
turned on, the manual
mode will be selected. To
select a Smart program,
press the Program button
repeatedly until the number 4, 5, 6, 7, 8, or 9
appears in the small display.
Begin pedaling to start the program.
Each Smart program consists of either 20 or 30
one-minute periods. One resistance level and one
target pace are programmed for each period.
Note: The same resistance level and/or target
pace may be programmed for two or more consecutive periods.
When you begin pedaling, the resistance of the
pedals will automatically change to the resistance
level programmed for the first period. Note: If the
resistance level is too high or too low, you can
change it by pressing the Resistance buttons.
The target pace for the first period will appear in
the small display for a few seconds, and the
arrows in the small display will help you to pedal
at the target pace—simply increase or decrease
your pace until one segment of the indicator bar
appears at the tip
of each arrow
(see the drawing
at the right). Note:
When the word
TARGET does not
appear in the
small display, your
actual pedaling pace will be shown. Important:
The target pace is intended only to provide a
goal. Your actual pace may be slower than the
target pace, especially during the first few
months of your exercise program. Make sure
to pedal at a pace that is comfortable for you.
During the last three seconds of each period, a
series of tones will sound and the time will flash in
the large display. The resistance of the pedals will
then change if a different resistance level is programmed for the next period. In addition, the
number of arrows in the small display will change
if a different target pace is programmed for the
next period.
During the program, the centre of the large display will show the time remaining in the program.
If you stop pedaling for a few seconds, the displays will pause and the time will flash. To restart
the program, resume pedaling.
Follow your progress with the large display.
See step 4 on page 13.
Measure your heart rate if desired.
See step 5 on page 14.
Turn on the fan if desired.
See step 6 on page 14.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 14.
7
6
5
4
3
2
1
HOW TO USE A SMART PROGRAM
Arrows
Indicator
Bar
16
Heart Rate program 1 is designed to keep your heart
rate between 65% and 85% of your
maximum heart
rate
during your workout. (Your maximum heart rate is
estimated by subtracting your age from 220; for example, if you are 25 years old, your maximum heart rate
is 195 beats per minute.) Heart Rate program 2 is
designed to keep your heart rate near a target heart
rate that you select.
Follow the steps below to use a Heart Rate program.
Turn on the console.
See step 1 on page 13.
Select one of the Heart Rate programs.
Each time the console is
turned on, the manual
mode will be selected. To
select a Heart Rate program, press the Program
button repeatedly until the
number 1 or 2 appears in
the small display.
Enter your age or a target heart rate.
If program 1 is selected, the word AGE and the
current age setting will appear in the large display.
If you have already entered your age, press the
Enter button. If you have not entered your age,
press the small + and – buttons to enter your age,
and then press the Enter button. Once you have
entered your age, it will be saved in memory until
the batteries are replaced.
If program 2 is selected, the letters PLS and the
current target heart rate will appear in the large
display. If you do not wish to change the target
heart rate, press the Enter button. If you wish to
change the target heart rate, press the small +
and – buttons, and then press the Enter button.
The target heart rate can be from 70 to 170 beats
per minute.
Hold the handgrip pulse sensor
.
To use a Heart Rate program, you must use the
handgrip pulse sensor or wear the optional chest
pulse sensor. If you use the handgrip pulse sensor, it is not necessary to hold the handgrips continuously during the program; however, you must
hold the handgrips frequently for the program to
operate properly. Each time you hold the hand-
grips, keep your hands on the metal contacts
for at least 30 seconds.
Begin pedaling to start the program.
Heart rate program 1 consists of 20 one-minute
periods. One resistance level and one target heart
rate are programmed for each period. (Note: The
same resistance level and/or target heart rate
may be programmed for two or more consecutive
periods.) Heart Rate program 2 is sixty minutes
long (you may choose to use only part of the program). The same resistance level and target heart
rate are programmed for the entire program.
When you begin pedaling, the resistance of the
pedals will automatically change to the resistance
level programmed for the first period.
As you pedal, the
arrows in the
small display will
help you to keep
your heart rate
near the current
target heart rate.
When you hold
the handgrip pulse sensor or wear the optional
chest pulse sensor, the console will compare your
heart rate to the current target heart rate. If your
heart rate is too far above or below the target
heart rate, the number of arrows in the small display will change to prompt you to increase or
decrease your pace. When the number of arrows
changes, change your pace until one segment of
the indicator bar appears at the tip of each arrow.
Important: The target pace is intended only to
provide a goal. Your actual pace may be slower than the target pace, especially during the
first few months of your exercise program.
Make sure to pedal at a pace that is comfortable for you.
5
4
3
2
1
HOW TO USE A HEART RATE PROGRAM
Arrows
Indicator
Bar
17
During the last three seconds of each period, a
series of tones will sound and the time will flash in
the large display. The resistance of the pedals will
then change if a different resistance level is programmed for the next period. Note: If the resistance level is too high or too low, you can adjust it
by pressing the Resistance buttons. However,
when the next period begins, the resistance will
automatically change if a different resistance level
is programmed for the next period.
The program will continue in this way until the
large display shows that no time remains in the
program. Note: If you stop pedaling for a few seconds, the program will end. To use the program
again, reselect it and start it at the beginning.
Follow your progress with the large display.
See step 4 on page 13.
Turn on the fan if desired.
See step 6 on page 14.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 14.
8
7
6
18
The Watts program will automatically change the resistance of the pedals to keep your power output near a
target level whilst you exercise.
Follow the steps below to use the Watts program.
Turn on the console.
See step 1 on page 13.
Select the Watts program.
Each time the console is
turned on, the manual
mode will be selected. To
select the Watts program,
press the Program button
repeatedly until the words
WATTS TARGET appear
in the small display.
Enter a target watts level.
When the Watts program is selected, a target
watts setting of 100 will appear in the small display. If you do not wish to change the target watts
setting, press the Enter button. If you wish to
change the target watts setting, press the small +
and – buttons, and then press the Enter button.
The target watts setting can be from 20 to 250.
Begin pedaling to start the program.
The Watts program consists of 20 one-minute
periods. When you begin pedaling, the resistance
of the pedals will automatically change to the
resistance level programmed for the first period.
At the beginning
of each period,
the target watts
setting will
appear in the
small display for
a few seconds,
and then your
actual power output will be shown. The indicator
bar will also appear in the small display, increasing or decreasing in length as you increase or
decrease your pedaling pace.
During the last three seconds of each period, a
series of tones will sound and the time will flash in
the large display. The console will then compare
your power output to the target watts setting. If
your power output is more than 20 watts above or
below the target watts setting, the resistance of
the pedals will automatically change to bring your
power output closer to the target watts level. Note:
If the resistance level is too high or too low, you can
adjust it by pressing the Resistance buttons.
However, when the next period begins, the resistance may automatically change.
During the program, the centre of the large display will show the time remaining in the program.
If you stop pedaling for a few seconds, the displays will pause and the time will flash. To restart
the program, resume pedaling.
Follow your progress with the large display.
See step 4 on page 13.
Measure your heart rate if desired.
See step 5 on page 14.
Turn on the fan if desired.
See step 6 on page 14.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 14.
8
7
6
5
4
3
2
1
HOW TO USE THE WATTS PROGRAM
Indicator
Bar
19
HOW TO USE IFIT.COM CD PROGRAMS
When you use an iFIT.com CD program, a certified
personal trainer will guide you through your workout
whilst the program interactively controls the resistance
of the pedals and prompts you to increase or decrease
your pace. Note: To purchase iFIT.com CDs, visit
our Web site at www.iconeurope.com.
Follow the steps below to use an iFIT.com CD program.
Turn on the console.
See step 1 on page 13.
Select the iFIT.com mode.
Each time the console is
turned on, the manual
mode will be selected. To
use an iFIT.com CD, press
the iFIT.com button. The
iFIT.com indicator will light
and the letters IF will
appear in the small display.
Insert an iFIT.com CD into the CD player.
To open the CD player, slide the centre button on
the CD player upward. Carefully insert an iFIT.com
CD into the CD player and then close the lid.
Press the Play/Pause button to start the
program.
To start the CD
program, press
the play/pause
button on the CD
player. A moment
after the button is
pressed, your personal trainer will begin guiding
you through your workout. Simply follow your personal trainer’s instructions.
The CD program will function in almost the same
way as a Smart program (see step 3 on page 14).
However, an electronic “chirping” sound will alert
you when the resistance level and/or the target
pace is about to change. Note: If the resistance
level and/or the target pace does not change
when a “chirp” is heard, make sure that the
iFIT.com indicator is lit. In addition, adjust the
volume (see step 5 below). If the volume is too
high or too low, the console may not detect the
program signals.
To stop the program at any time,
stop pedaling and
press the play/
pause button. To
restart the program, press the play/pause button and begin pedaling.
Note: To select a
different program
on the CD, press
the skip/search
buttons on the
CD player.
Adjust the volume if desired.
To adjust the volume, press the
Volume – and +
buttons on the
CD player.
5
4
3
2
1
20
Follow your progress with the large display.
See step 4 on page 13.
Measure your heart rate if desired.
See step 5 on page 14.
Turn on the fan if desired.
See step 6 on page 14.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 14.
Note: Always remove iFIT.com CDs from the
CD player when you are finished using them.
HOW TO PLAY MUSIC CDS
If desired, you can play your own music CDs in the CD
player. Before playing music CDs, select the manual
mode of the console (see HOW TO USE THE MANUAL
MODE on page 13).
9
8
7
6
21
HOW TO CONNECT THE EXERCISE CYCLE TO
YOUR VCR OR COMPUTER
HOW TO CONNECT TO YOUR VCR
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the adapter. Plug the adapter into
the AUDIO OUT jack on your VCR.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the adapter. Plug the adapter into
an RCA Y-adaptor (available at electronics stores).
Next, remove the wire that is currently plugged into
the AUDIO OUT jack on your VCR and plug the
wire into the unused side of the Y-adaptor. Plug the
Y-adaptor into the AUDIO OUT jack on your VCR.
HOW TO CONNECT TO YOUR COMPUTER
Note: If your computer has a 3.5mm LINE OUT
jack, see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the LINE OUT jack on your computer.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the splitter. Plug the splitter into the
PHONES jack on your computer. Plug your headphones or speakers into the other side of the splitter.
Audio Cable
Adapter
A
Audio Cable
Adapter
B
Wire removed from
AUDIO OUT jack
RCA
Y-adaptor
Audio
Cable
A
Audio
Cable
B
Splitter
Headphones/Speakers
VIDEO AUDIO
IN
CH
34
OUT
AUDIO OUT
RIGHT
LEFT
ANT. IN
RF OUT
LINE OUT
PHONES
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
34
OUT
22
HOW TO USE IFIT.COM VIDEO PROGRAMS
To use iFIT.com videocassettes, the exercise cycle
must be connected to your VCR. See HOW TO CONNECT TO YOUR VCR on page 21. To purchase
iFIT.com videocassettes, visit our Web site at
www.iconeurope.com.
Follow the steps below to use an iFIT.com video
program.
Turn on the console.
See step 1 on page 13.
Select the iFIT.com mode.
Each time the console is
turned on, the manual
mode will be selected. To
use an iFIT.com videocassette, press the iFIT.com
button. The iFIT.com indicator will light and the letters IF will appear in the
small display.
Insert the iFIT.com videocassette.
Insert the videocassette into your VCR.
Press the play button on your VCR.
A moment after the play button is pressed, your
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s
instructions.
The video program will function in almost the
same way as a Smart program (see step 3 on
page 15). However, an electronic “chirping” sound
will alert you when the resistance level and/or the
target pace is about to change.
Note: If the resistance level and/or the target
pace does not change when a “chirp” is heard:
• Make sure that the iFIT.com indicator is lit.
• Adjust the volume of your VCR. If the volume
is too high or too low, the console may not
detect the program signals.
• Make sure that the audio cable is properly
connected and that it is fully plugged in.
To stop the program at any time, stop pedaling
and press the pause button on your VCR. To
restart the program, press the play button on your
VCR and begin pedaling.
Follow your progress with the large display.
See step 4 on page 13.
Measure your heart rate if desired.
See step 5 on page 14.
Turn on the fan if desired.
See step 6 on page 14.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 14.
8
7
6
5
4
3
2
1
23
Our Web site at www.iFIT.com allows you to play
iFIT.com programs directly from the internet. To use
programs from our Web site, the exercise cycle must
be connected to your computer. See HOW TO CONNECT TO YOUR COMPUTER on page 21. In addition, you must have an internet connection and an
internet service provider. A list of specific system
requirements is found on our Web site.
Follow the steps below to use a program from our
Web site.
Turn on the console.
See step 1 on page 13.
Select the iFIT.com mode.
Each time the console is
turned on, the manual
mode will be selected. To
use a program from our
Web site, press the
iFIT.com button. The
iFIT.com indicator will light
and the letters IF will
appear in the small display.
Go to your computer and start an internet
connection.
Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.
Follow the desired links on our Web site to
select a program.
Follow the on-line instructions to start the
program.
When you start the program, an on-screen
countdown will begin.
Return to the exercise cycle and begin
pedaling.
When the on-screen countdown ends, the program will begin. The program will function in
almost the same way as a Smart program (see
step 3 on page 15). However, an electronic “chirping” sound will alert you when the resistance level
and/or the target pace is about to change.
Follow your progress with the large display.
See step 4 on page 13.
Measure your heart rate if desired.
See step 5 on page 14.
Turn on the fan if desired.
See step 6 on page 14.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 14.
11
10
9
8
7
6
5
4
3
2
1
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
THE OPTIONAL CHEST PULSE SENSOR
The optional chest pulse sensor provides hands-free
operation and continuously monitors your heart rate
during your workouts. To purchase the optional
chest pulse sensor, call 08457 089 009.
24
Inspect and tighten all parts of the exercise cycle regularly. Replace any worn parts immediately.
To clean the exercise cycle, use a damp cloth and a
small amount of mild soap. Important: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
HOW TO MOVE THE EXERCISE CYCLE
To move the exercise cycle, stand behind it and lift
the frame in the location shown below. To reduce the
risk of injury, bend your legs and keep your back
straight. As you lift the frame, make sure to lift
with your legs rather than your back. Carefully
move the exercise cycle on the front wheels, and then
lower the frame.
HOW TO LEVEL THE EXERCISE CYCLE
After the exercise
cycle has been
moved to the
location where it
will be used,
make sure that
both ends of front
stabiliser are
touching the floor.
If the exercise
cycle rocks slightly during use, turn one or both of the leveling feet
under the front stabiliser until the rocking motion is
eliminated.
HANDGRIP PULSE SENSOR TROUBLESHOOTING
• Avoid moving your hands whilst using the handgrip
pulse sensor. Excessive movement may interfere
with heart rate readings.
• Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
• For the most accurate heart rate reading, hold the
metal contacts for about 30 seconds.
• For optimal performance of the handgrip pulse sensor, keep the metal contacts clean. The contacts
can be cleaned with a soft cloth; never use alcohol,
abrasives, or chemicals.
BATTERY REPLACEMENT
If the console is using battery power, and if the displays becomes dim, the batteries should be replaced.
Most console problems are the result of low batteries.
See assembly step 12 on page 9 for replacement
instructions.
MAINTENANCE AND TROUBLESHOOTING
Lift
Here
Leveling
Foot
Wheel
25
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age. The three numbers are your “training zone.”
The lowest number is the recommended heart rate for
fat burning; the middle number is the recommended
heart rate for maximum fat burning; the highest number is the recommended heart rate for aerobic exercise.
Fat Burning
To burn fat effectively, you must exercise at a relatively low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible
carbohydrate
calories for energy. Only after the first few minutes of exercise does
your body begin to use stored
fat
calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest number in your training zone as you exercise. For maximum fat burning, adjust the intensity of your exercise
until your heart rate is near the middle number in your
training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in preparation for exercise.
Training zone exercise, consisting of 20 to 30 minutes of exercising with your heart rate in your training
zone. Note: During the first few weeks of your exercise program, do not keep your heart rate in your
training zone for longer than 20 minutes.
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three workouts each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. Remember, the key to success is make exercise a regular and enjoyable part of your everyday life.
WARNING: Before beginning
this or any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons with
pre-existing health problems.
The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
26
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts, then
relax. Repeat 3 times. Stretches: Hamstrings, back of knees and
back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward
you and rest it against the inner thigh of your extended leg. Reach
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Hamstrings, lower back and
groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat 3
times for each leg. To cause further stretching of the achilles tendons, bend your back leg as well. Stretches: Calves, achilles tendons and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your buttocks as possible. Hold for 15 counts, then relax. Repeat 3 times for
each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull
your feet toward your groin area as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.
1
2
3
4
5
27
NOTES
28
PART LIST—Model No. PFEVEX62832 R0704A
1 1 Frame
2 1 Upright
3 2 Handlebar
4 1 Console
5 1 Right Handlebar Cover
6 1 Left Handlebar Cover
7 1 Crank
8 4 M6 x 16mm Button Screw
9 1 Seat
10 1 Seat Carriage Assembly
11 1 Seat Bracket
12 1 Small Frame Bushing
13 1 Front Stabiliser Cover
14 1 Left Stabiliser Endcap
15 1 Front Stabiliser
16 1 Left Rear Stabiliser
17 2 Wheel
18 1 Right Pedal Strap
19 2 Leveling Foot
20 1 Adjustment Knob
21 1 Right Pedal
22 1 Left Pedal
23 1 Right Crank Arm
24 1 Left Crank Arm
25 1 Left Pedal Strap
26 1 Left Side Shield
27 1 Right Side Shield
28 1 Large Snap Ring
29 1 Pulley
30 1 Magnet
31 1 Bottle Holder
32 1 Flywheel Washer
33 2 Crank Bearing
34 1 Flywheel
35 1 “C” Magnet
36 1 Resistance Cable Assembly
37 1 Spring
38 1 Resistance Motor
39 1 Idler Assembly
40 4 M8 x 25mm Button Screw
41 12 M4 x 12mm Screw
42 1 Upper Wire Harness
43 1 Lower Wire Harness
44 2 Bushing Bracket
45 1 Clamp
46 1 Reed Switch/Wire
47 1 Drive Belt
48 1 Flywheel Cover
49 6 M8 Nylon Locknut
50 2 Flange Screw
51 4 M6 x 13mm Button Screw
52 1 Power Cord
53 1 Right Belt Cover
54 2 M8 x 52mm Button Screw
55 1 Left Belt Cover
56 2 M4 x 50mm Screw
57 17 M4 x 16mm Screw
58 1 Small Pulley
59 1 M6 x 16mm Button Screw
60 2 M4 x 8mm Screw
61 1 M6 x 8mm Button Screw
62 6 M4 x 10mm Screw
63 2 M6 Nylon Locknut
64 3 M8 Washer
65 1 M8 x 42mm Screw
66 6 M6 Washer
67 6 M4 x 38mm Screw
68 1 Right Inner Handlebar
69 1 Large Frame Bushing
70 6 M4 x 16mm Flange Screw
71 1 Left Inner Handlebar
72 2 Snap Ring
73 1 Right Stabiliser Endcap
74 1 Steel Washer
75 2 Crank Cover
76 1 Idler Bracket
77 1 Stop Bolt
78 2 M6 Nut
79 1 Jack Bracket
80 1 Reed Switch Bracket
81 1 Frame Rail
82 2 Bumper
83 1 Frame Rail Endcap
84 1 Roller
85 1 Left Rail Cover
86 1 Right Rail Cover
87 1 Stabiliser Plate
88 6 Carriage Wheel
89 6 Small Snap Ring
90 1 Backrest
91 2 Foam Grip
92 2 Handlebar Endcap
93 3 M6 x 22mm Button Screw
94 4 M8 x 13mm Button Screw
95 4 M4 x 25mm Screw
96 4 M8 x 38mm Button Bolt
97 1 7.5mm Spacer
98 1 Right Rear Stabiliser
99 1 M6 x 25mm Button Screw
100 6 M6 x 10mm Screw
Key No. Qty. Description Key No. Qty. Description
To locate the parts listed below, see the EXPLODED DRAWING on pages 30 and 31.
29
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
101 2 M4 x 20mm Screw
102 8 M6 x 16mm Tapered Button Screw
103 1 8.5mm Spacer
104 1 CD Holder
105 4 M8 Split Washer
106 1 Pulse Wire Harness
# 1 Power Cord Adapter
# 1 Hex Key
# 1 User’s Manual
Key No. Qty. Description Key No. Qty. Description
30
EXPLODED DRAWING—Model No. PFEVEX62832 R0704A
To identify the parts shown below, see
the PART LIST on pages 28 and 29.
57
6
57
102
51
49
97
51
72
70
25
36
51
34
103
38
44
75
80
50
46
57
41
28
78
79
45
33
49
70
35
64
77
44
37
20
84
51
41
58
32
60
12
41
102
72
60
99
1
71
41
41
41
41
5
2
69
101
82
100
39
106
41
65
61
31
76
104
33
30
41
74
81
100
7
100
23
29
101
102
82
102
4
68
18
21
75
50
100
83
24
22
13
15
17
66
63
19
64
56
56
64
54
17
19
66
63
47
42
43
16
14
40
52
98
73
87
40
31
92
91
9
91
92
90
3
49
93
57
95
96
27
95
105
11
105
49
3
94
96
105
66
66
8
8
10
88
89
88
48
88
89
89
57
94
105
93
88
89
53
57
67
95
95
26
67
55
57
57
62
67
85
62
57
67
86
Part No. 216464 R0704A Printed in China © 2004 ICON IP, Inc.
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Te l:
Outside the UK: 0 (444) 113 387 7133
Fax: 0 (444) 113 387 7125
To help us assist you, please be prepared to give the following information:
• the MODEL NUMBER of the product (PFEVEX62832)
• the NAME of the product (PROFORM
®
765 TR exercise cycle)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of each part (see pages 28 to 31)
08457 089 009
Loading...