
7000 lb. Wireless Vehicle Scale System
Part No. 67644, Version 1

PROFORM 7000 lb. Wireless Vehicle Scale (p/n 67644)
FL weight
level indicator
Main features and parts
1. Four wireless battery-powered weighing pads and LCD display unit.
2. Each weighing pad has a capacity of 1750 lbs (795 kg).
3. LCD display measures in lbs. or kg for each wheel and the total vehicle
weight.
4. LCD display indicates percentage (%) weight of each wheel relative to the
total vehicle weight.
5. LCD display indicates:
a. Cross weight percentage loads
b. Side to Side weight percentage loads
c. Front to Rear weight percentage loads.
6. LCD display indicates battery level for individual pads and LCD display.
7. LCD display and control buttons have a backlighting f eature
8. Pads not on will be displayed as OFF on LCD Display.
9. Battery power level indicator for LCD display and each i ndividual pad.
10. LCD display and weighing pads operate with AA batteries (included).
11. Scale pads and LCD display fit into a foam lined hard case with wheels and
telescoping handle.
FL percentage
weight
Scale pad battery
FR weight
Display box battery
level indicator
FR percentage
weight
RL
weight
RR percentage
RL percentage
weight
Wireless signal
indicator
Total
weight

LCD display format
Display box battery level
Backlighting
ON/OFF
Using the LCD Display
Operating instructions.
1. Open the LCD display box, insert 4 AA batteries into the battery pack.
2. Open the battery door of each weighing pad, and insert 2 AA batteries into the
battery pack.
3. Power on each weighing pad by switching the small switch from ‘0’ to ‘1’ near the
handle of each pad.
4. The LED light next to the pad’s handle should light up. If it looks dim or does not
light up, replace with 2 new AA batteries.
5. Make sure that the correct pad is pos i tioned in front of the c or responding wheel: FR,
FL, RR, and RL - Front Right, Front Left, Rear Right, and Rear Left. The handle of
each weighing pad should be f acing outward toward the side of the car.

6. Power on the LCD display by press ing the “On/Off” butt on. Wait until the weight
readings all show zero or press the “Tare” button to zero. Press “Function” to toggle
between lbs and kgs.
7.
The battery power indicator represents the amount of battery life available in 3
levels. If the display shows only the battery outline, replace the AA batteries
accordingly.
8. Using jacks carefully lower each wheel onto the center of the weighing pads, or
carefully drive the vehicle up onto the center of the weighing pads. The more
centered each wheel is on the pad, the more accurate the reading will be.
9. Never press “Tare” if the vehicle is on the pads, otherwise the vehicle has to be
removed and the scale must be zeroed again.
10. While the car is on the pads. Shake each of the corners of the car up and down
to relieve any residual stress or friction within the chassis.
11. The car total weight, individual weight of each wheel as well as its percentage to
the total weight will be shown on the default screen. (Screen #1)
Toggling between screens:
12. Press and hold the “Function” button with one finger, press the “Tare” button
once. The display passes to Screen #2, which displays the total Front and Rear
weight percentages.
13. Press and hold the “Function” button with one finger, press the “Tare” button
again, and the display will pass to Screen #3, which displays the total Left and
Right weight in percentages.
14. Press and hold the “Function” button with one finger, press the “Tare” button
again, and the display passes to Screen #4, which displays the Cross weight of
(LF) Left Front, and (RR) Rear Right percentage.
15. Press and hold the “Function” button with one finger, press the “Tare” button
again, and the display passes to Screen #5, which displays the Cross weight of
(RF) Right Front, and (LR) Left Rear percentage.
16. It is possible to scroll through the screens, but pressing and holding “Function”,
while repeatedly pressing the “Tare” button.
17. Press ON/OFF to power off the unit.
18. Switch off all the weighing pads, and make sure the LED lights are all off.

Screen #1
Fr: Front weight percent
Screen #2 Rr: Rear weight percent
Lt: Left total percent
Screen #3 Rt: Right total percent

Screen #4
Screen #5
Cross LF: Left Front, RR: Right Rear percent
Cross RF: Right Front, LR:Left Rear percent
For more information, please visit www.proformparts.com or call our tech team (586)774-2500
9:00 a.m. to 5:00 p.m. EST. Email: tech@proformparts.com
Specialty Auto Parts USA, Inc. | 26708 Groesbeck Hwy. | Warren, MI 48089
© 2016 Specialty Auto Parts USA, Inc. All Rights Reserved.