Pro-Form 525 CSX PFEX62715.0 User Manual

Download

Page 1

www.proform.com

Model No. PFEX62715.0 Serial No.

Write the serial number in the space above for reference.

Serial Number Decal

ACTIVATE YOUR WARRANTY

USER’S MANUAL

To register your product and activate your warranty today, go to www.proformservice.com/ registration.

CUSTOMER CARE

For service at any time, go to www.proformservice.com.

Or call 1-888-533-1333 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–12 p.m. MT

Please do not contact the store.

CAUTION

Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.

Page 2

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

HOW TO USE THE EXERCISE BIKE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

WARNING DECAL PLACEMENT

This drawing shows the location(s) of the warning decal(s).

If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may

not be shown at actual size.

IFIT is a registered trademark of ICON Health & Fitness, Inc.

PROFORM is a registered trademark of ICON Health & Fitness, Inc.

Page 3

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

1. It is the responsibility of the owner to ensure that all users of the exercise bike are adequately informed of all precautions.

2. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems.

3. The exercise bike is not intended for use by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they are given supervision or instruction about use of the exercise bike by someone responsible for their safety.

4. Use the exercise bike only as described in this manual.

5. The exercise bike is intended for home use only. Do not use the exercise bike in a commercial, rental, or institutional setting.

6. Keep the exercise bike indoors, away from moisture and dust. Do not put the exercise bike in a garage or covered patio, or near water.

7. Place the exercise bike on a level surface with at least 2 ft. (0.6 m) of clearance around the exercise bike. To protect the floor or carpet from damage, place a mat under the exercise bike.

8. Inspect and properly tighten all parts each time the exercise bike is used. Replace any worn parts immediately.

9. Keep children under age 13 and pets away from the exercise bike at all times.

10. Wear appropriate clothes while exercising; do not wear loose clothes that could become caught on the exercise bike. Always wear athletic shoes for foot protection.

11. The exercise bike should not be used by persons weighing more than 275 lbs. (125 kg).

12. Be careful when mounting and dismounting the exercise bike.

13. The heart rate monitor is not a medical device. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determining heart rate trends in general.

14. Always keep your back straight while using the exercise bike; do not arch your back.

15. Over exercising may result in serious injury or death. If you feel faint, if you become short of breath, or if you experience pain while exercising, stop immediately and cool down.

Page 4

Page 5

STANDARD SERVICE PLANS

all

Page 6

BEFORE YOU BEGIN

Thank you for selecting the revolutionary PROFORM® 525 CSX exercise bike. Cycling is an effective exercise for increasing cardiovascular fitness, building endurance, and toning the body. The 525 CSX exercise bike provides an impressive selection of features designed to make your workouts at home more effective and enjoyable.

For your benefit, read this manual carefully before you use the exercise bike. If you have questions after

Length: 3 ft. 3 in. (99 cm) Width: 1 ft. 9 in. (53 cm)

Handlebar

Fan

reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.

Ta bl e t H ol d er

Heart Rate Monitor

Console

Seat

Seat Knob

Leveling Foot

Handle

Seat Post Knob

Accessory Tray

Wheel

Pedal/Strap

Page 7

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it

has been preassembled. Extra parts may be included.

M8 Locknut

(17)–2

M8 x 58mm Bolt

(24)–2

M4 x 16mm

Screw (2)–6

#8 x 5/8"

Screw (65)–4

M8 x 70mm Screw

M8 x 20mm

Screw (29)–4

(46)–4

Page 8

ASSEMBLY

• To hire an authorized service technician to assemble this product, call 1-800-445-2480.

• Assembly requires two persons.

• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you ﬁ nish all assembly steps.

• Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.”

• To identify small parts, see page 7.

1. Go to www.proform.com/registration on your

computer and register your product.

• activates your warranty

• saves you time if you ever need to contact Customer Care

• allows us to notify you of upgrades and offers

• In addition to the included tool(s), assembly requires the following tools:

one Phillips screwdriver

one standard screwdriver

one adjustable wrench

Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools.

Note: If you do not have Internet access, call

Customer Care (see the front cover of this manual) and register your product.

Page 9

2. Using a standard screwdriver, remove the Shield Cover (26) from the Left and Right Shields (37, 58).

If there is a shipping tube (not shown) on the

rear of the Frame (50), remove and discard the shipping screws and the shipping tube.

Next, set a sturdy piece of packing material

under the rear of the Frame (50). Have a sec-

ond person hold the Frame to prevent it from tipping while you complete this step.

Identify the Rear Stabilizer (44).

Attach the Rear Stabilizer (44) to the Frame (50)

with two M8 x 70mm Screws (46).

Then, remove the packing material from under

the rear of the Frame (50).

37, 58

3. If there is a shipping tube (not shown) on the front of the Frame (50), remove and discard the shipping screws and the shipping tube.

Next, set a sturdy piece of packing material

under the front of the Frame (50).

Attach the Front Stabilizer (63) to the Frame (50)

with two M8 x 70mm Screws (46).

Then, remove the packing material from under

the front of the Frame (50).

Page 10

4. Set the Seat Carriage (15) on the Seat Post (18) and hold it in place.

Insert the Seat Knob (19) upward into the Seat

Post (18), and tighten the Seat Knob into the Seat Bracket (14) inside the Seat Carriage (15).

5. Hold the Seat Post (18) near the Frame (50), and move the Seat Post Bushing (21) so that the lock tab is covering the oval hole in the Seat Post.

Have a second person loosen the Seat Post

Knob (28) a few turns and pull it outward.

Insert the Seat Post (18) and the Seat Post

Bushing (21) into the Frame (50) until the lock tab snaps into the indicated hole in the Frame.

Next, slide the Seat Post (18) upward or down-

ward to the desired position, and release the Seat Post Knob (28) into an adjustment hole in the Seat Post. Then, tighten the Seat Post Knob.

Move the Seat Post (18) upward or downward

slightly to make sure that the Seat Post Knob (28) is engaged in an adjustment hole.

Adjustment

Holes

Lock Tab

Oval Hole

Hole

Page 11

6. Tip: Avoid pinching the Main Wire Harness (25). Orient the Upright (27) as shown, and hold

it on the Frame (50).

Attach the Upright (27) with four M8 x 20mm

Screws (29); start all the Screws, and then

tighten them.

7. Locate the lower end of the wire tie in the Upright (27). Tie the wire tie to the Main Wire Harness (25). Then, pull the upper end of the wire tie until the Main Wire Harness is routed through the Upright and out of the indicated hole.

Tip: To prevent the Main Wire Harness (25)

from falling into the Upright (27), secure the Main Wire Harness with the wire tie.

Avoid pinching the

Main Wire Harness (25)

Hole

Wire

Tie

Wire

Tie

Page 12

8. Orient the Shield Cover (26) as shown, and press it onto the Left and Right Shields (37, 58).

37, 58

9. Orient the Console Cover (3) as shown, and slide it onto the Upright (27).

Tip: Avoid pinching the Main Wire Harness

(25). Insert the Handlebar (4) into the Upright (27).

Attach the Handlebar (4) with two M8 x 58mm

Bolts (24) and two M8 Locknuts (17). Make sure

that the Locknuts are in the hexagonal holes.

Hexagonal Holes

Avoid pinching

the Main Wire

Harness (25)

Page 13

10. Untie and discard the wire tie on the Main Wire Harness (25). Route the Main Wire Harness upward through the Handlebar (4) as shown.

While a second person holds the Console (7)

near the Handlebar (4), connect the wires on the Console to the Main Wire Harness (25) and the Pulse Wire (23).

Then, insert the excess wire into the

Handlebar (4).

11. Tip: Avoid pinching the wires. Attach the Console (7) to the Handlebar (4) with four M4 x 16mm Screws (2); start all the Screws,

and then tighten them.

Wires

Avoid pinching

the wires

Page 14

12. Slide the Console Cover (3) upward to the Handlebar (4). Attach the Console Cover to the Handlebar and to the Console (7) with two M4 x 16mm Screws (2).

13. IMPORTANT: If you purchased the optional

iFit module, insert the iFit module into the iFit port on the Console (7) before you attach the Tablet Holder ( 1). After the exercise bike is assembled, follow the instructions included with the iFit module.

Attach the Tablet Holder (1) to the Console (7)

with four #8 x 5/8" Screws (65); start all the

Screws, and then tighten them.

iFit

Port

14. Identify the Right Pedal (60).

Using an adjustable wrench, firmly tighten the

Right Pedal (60) clockwise into the Right Crank Arm (59).

Firmly tighten the Left Pedal (not shown)

counterclockwise into the Left Crank Arm (not shown). IMPORTANT: You must turn the Left Pedal counterclockwise to attach it.

Adjust the strap on the Right Pedal (60) to the

desired position, and press the ends of the strap onto the tabs on the Right Pedal. Adjust the

strap on the Left Pedal (not shown) in the same way.

Strap

Ta b

Page 15

15. Plug the Power Adapter (30) into the receptacle on the frame of the exercise bike.

Note: To plug the Power Adapter (30) into an

outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 16.

16. After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it

functions properly. Make sure that all parts are properly tightened before you use the exercise bike.

Extra parts may be included. Place a mat under the exercise bike to protect the floor or carpet.

Page 16

HOW TO USE THE EXERCISE BIKE

HOW TO PLUG IN THE POWER ADAPTER

IMPORTANT: If the exercise bike has been exposed to cold temperatures, allow it to warm to room temperature before you plug in the power adapter. If you do not do this, you may damage the console displays or other electronic components.

Plug the power adapter into the receptacle on the frame of the exercise bike. Then, plug the power adapter into an appropriate outlet that is properly installed in accordance with all local codes and ordinances.

HOW TO LEVEL THE EXERCISE BIKE

If the exercise bike rocks slightly on your floor during use, turn one or both of the leveling feet on the rear stabilizer until the rocking motion is eliminated.

Leveling

Feet

HOW TO ADJUST THE HEIGHT OF THE SEAT

For effective exercise, the seat should be at the proper height. As you pedal, there should be a slight bend in your knees when the pedals are in the lowest position.

To adjust the seat, first loosen the seat post knob a few turns and pull it outward. Next, slide the seat post upward or downward to the desired position, and release the seat post knob into an adjustment hole in the seat post. Then, tighten the seat post knob. Move the seat post upward or downward

slightly to make sure that the seat post knob is engaged in one of the adjustment holes.

HOW TO ADJUST THE HORIZONTAL POSITION OF THE SEAT

To adjust the horizontal position of the seat, loosen the seat knob a few turns, move the seat forward or backward to the desired position, and then firmly tighten the seat knob.

Knob

Page 17

HOW TO ADJUST THE PEDAL STRAPS

HOW TO USE THE TABLET HOLDER

To a d ju s t t he pedal straps, first pull the ends of the straps off the tabs on the pedals. Then, adjust the straps to the desired position, and press the ends of the straps onto the tabs.

Strap

Ta b

IMPORTANT: The tablet holder is designed for use with most full-size tablets. Do not place any other electronic device or object into the tablet holder.

To insert a tablet into the tablet holder, set the bottom edge of the tablet in the tray. Make sure

that the tablet is firmly secured in the tablet holder.

Reverse these actions to remove the tablet from the tablet holder.

Page 18

CONSOLE DIAGRAM

MAKE YOUR FITNESS GOALS A REALITY WITH IFIT.COM

With your new iFit-compatible fitness equipment, you can use an array of features on iFit.com to make your fitness goals a reality:

Exercise anywhere in the world with customizable Google Maps.

Download training workouts designed to help you reach your personal goals.

Measure your progress by competing against other users in the iFit community.

Upload your workout results to the iFit cloud and track your accomplishments.

Set calorie, time, or distance goals for your workouts.

Choose and download sets of weight-loss workouts.

Go to iFit.com to learn more.

Page 19

FEATURES OF THE CONSOLE

HOW TO USE THE MANUAL MODE

The advanced console offers an array of features designed to make your workouts more effective and enjoyable.

When you use the manual mode of the console, you can change the resistance of the pedals with the touch of a button. While you exercise, the console will display continuous exercise feedback. You can also measure your heart rate using the handgrip heart rate monitor.

The console also offers a selection of onboard workouts. Each workout automatically changes the resistance of the pedals as it guides you through an effective workout. You can also set a calorie, distance, or time goal.

In addition, the console features an iFit mode that enables the console to communicate with your wireless network through an optional iFit module. With the iFit mode, you can download personalized workouts, create your own workouts, track your workout results, race against other iFit users, and access many other features. To purchase an iFit module at any time, go

to www.iFit.com or call the telephone number on the front cover of this manual.

You ca n e ve n co nn ec t y ou r MP 3 pl ay er or C D pl ay er to the console sound system and listen to your favorite music or audio books while you exercise.

To use the manual mode, see page 19. To use the sound system, see page 21. To use an onboard workout, see page 22. To use a set-a-goal workout, see page 23. To use an iFit workout, see page

24. To change console settings, see page 26.

1. Begin pedaling or press any button on the console to turn on the console.

When you turn on the console, the display will turn

on. The console will then be ready for use.

2. Select the manual mode.

Press the Manual button or the Home button to

select the manual mode.

If a wireless iFit module is not inserted into the con-

sole and connected to iFit, the manual mode will be selected automatically.

3. Change the resistance of the pedals as desired.

Press the Quick Start button or begin pedaling to

start the manual mode.

As you pedal, change the resistance of the pedals

by pressing the Quick Resistance increase and decrease buttons or by pressing one of the numbered Quick Resistance buttons.

Note: After you press a button, it will take a

moment for the pedals to reach the selected resistance level.

4. Follow your progress with the display.

The display can show the following workout

information:

Note: If there is a sheet of plastic on the display, remove the plastic.

Calories (Cals.)—This display mode will show the

approximate number of calories you have burned.

Page 20

Calories per Hour (Cals./Hr)—This display mode

will show the approximate number of calories you are burning per hour.

Distance (Dist.)—This display mode will show

the distance that you have pedaled in miles or kilometers.

Pulse—This display mode will show your heart rate

when you use the handgrip heart rate monitor (see step 5).

Resistance (Resist.)—This display mode will

show the resistance level of the pedals for a few seconds each time the resistance level changes.

When a wireless iFit module

is connected, the wireless symbol at the top of the display will show the strength of your wireless signal. Four arcs indicate full signal strength.

To e x it th e m a nu a l m od e o r a wo r ko ut , pr e ss th e

Home button. If necessary, press the Home button again.

Change the volume level of

the console by pressing the volume increase and decrease buttons.

Speed—This display mode will show your pedaling

speed in miles per hour or kilometers per hour.

Time—When the manual mode is selected, this

display mode will show the elapsed time. When a workout is selected, this display mode will show the time remaining in the workout.

The matrix offers several display tabs. Press the

increase and decrease buttons next to the Enter button until the desired tab is shown.

Speed—This tab will show a profile of the speed

settings of the workout. A new segment will appear at the end of each minute.

My Trail—This tab will show a track that represents

1/4 mile (400 m). As you exercise, the flashing rectangle will show your progress. The My Trail tab will also show the number of laps you complete.

Calorie—This tab will show the approximate

amount of calories you have burned. The height of each segment represents the amount of calories burned during that segment.

As you exercise, the workout intensity level bar

will indicate the approximate intensity level of your exercise.

To p a us e t h e c on s ol e , p re s s t he Pa us e/ En d b u t-

ton or simply stop pedaling. When the console is paused, the time will flash in the display. To continue your workout, press the Quick Start button or simply resume pedaling. To end your workout, press the Pause/End button again.

Note: The console can show pedaling speed, and

distance in standard or metric units of measurement. To change the unit of measurement, see HOW TO CHANGE CONSOLE SETTINGS on page 26.

5. Measure your heart rate if desired.

If there are

sheets of plastic on the metal contacts on the handgrip heart rate monitor, remove the plastic. To m e as u re

your heart rate, hold the handgrip heart rate monitor with your palms resting against the contacts.

Avoid moving your hands or gripping the contacts tightly.

Contacts

When your pulse is detected, a heart symbol in the

calorie display will flash each time your heart beats, one or two dashes will appear, and then your heart rate will be shown. For the most accurate heart

rate reading, hold the contacts for at least 15 seconds.

Page 21

If the display does not show your heart rate, make

sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the contacts tightly. For optimal performance, clean the contacts using a soft cloth; never

use alcohol, abrasives, or chemicals to clean the contacts.

6. Turn on the fan if desired.

The fan has high and low speed settings. Press the

fan increase and decrease buttons repeatedly to select a fan speed or to turn off the fan.

7. When you are finished exercising, the console will turn off automatically.

If the pedals do not move for several seconds, a

tone will sound, the console will pause, and the time will flash in the display. To resume your workout, simply resume pedaling.

If the pedals do not move for several minutes and

the buttons are not pressed, the console will turn off and the display will be reset.

HOW TO USE THE SOUND SYSTEM

To p l ay mu s ic or au d io bo o ks th r ou gh t he co n so l e sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure

that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store.

Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player.

Note: The console features a display demo mode,

designed to be used if the exercise bike is displayed in a store. When the demo mode is turned on, the console will show a preset presentation. To turn off the demo mode, see HOW TO CHANGE CONSOLE SETTINGS on page 26.

Page 22

HOW TO USE AN ONBOARD WORKOUT

1. Begin pedaling or press any button on the console to turn on the console.

When you turn on the console, the display will turn

on. The console will then be ready for use.

2. Select an onboard workout.

To s e le c t a n o nb o ar d w o rk o ut , p r es s th e C al o ri e ,

Intensity, Speed, or Incline button repeatedly until the desired workout appears in the display.

When you select an onboard workout, the display

will show the duration of the workout and the name of the workout. A profile of the speed settings of the workout will appear in the matrix.

The maximum resistance level and the maximum

speed for the workout will also appear in the display.

3. Start the workout.

Press the Quick Start button or begin pedaling to

start the workout.

Each

workout is divided into oneminute segments. One resistance level and one target speed is programmed for each segment. Note: The same resistance level and/or target speed may be programmed for consecutive segments.

During the workout, the profile on the speed tab will

show your progress. The flashing segment of the profile represents the current segment of the workout. The height of the flashing segment indicates the target speed for the current segment.

At the end of each segment of the workout, a

series of tones will sound and the next segment of the profile will begin to flash. If a different resistance level and/or target speed is programmed for the next segment, the resistance level and/or target speed will appear in the display for a few seconds

Profile

to alert you. The resistance of the pedals will then change.

As you exercise, you will be prompted to keep your

pedaling speed near the target speed for the current segment. When an upward-pointing arrow appears in the display, increase your pedaling speed. When a downward-pointing arrow

appears, decrease your pedaling speed. When no arrow appears, maintain your current pedaling

speed.

IMPORTANT: The target speed is intended only

to provide motivation. Your actual pedaling speed may be slower than the target speed. Make sure to pedal at a speed that is comfortable for you.

If the resistance level for the current segment is

too high or too low, you can manually override the setting by pressing the Quick Resistance buttons.

IMPORTANT: When the current segment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment.

The workout will continue in this way until the last

segment ends.

To p a us e t h e w or k ou t , p re s s t he Pa us e/ En d b u t-

4. Follow your progress with the display.

See step 4 on page 19.

5. Measure your heart rate if desired.

See step 5 on page 20.

6. Turn on the fan if desired.

See step 6 on page 21.

7. When you are finished exercising, the console will turn off automatically.

See step 7 on page 21.

Page 23

HOW TO USE A SET-A-GOAL WORKOUT

1. Begin pedaling or press any button on the console to turn on the console.

When you turn on the console, the display will turn

on. The console will then be ready for use.

Note: The calorie goal is an estimate of the

number of calories that you will burn during the workout. The actual number of calories that you burn will depend on various factors such as your weight. In addition, if you manually change the resistance during the workout, the number of calories you burn will be affected.

2. Set a calorie, distance, or time goal.

To set a calorie, distance, or time goal, first press

the Set A Goal button.

Next, press the increase and decrease buttons

next to the Enter button until the name of the desired goal appears in the display. Then, press the Enter button.

Then, press the increase and decrease buttons

next to the Enter button to set the desired goal.

3. Start the workout.

Press the Quick Start button or begin pedaling to

start the workout.

Each workout is divided into one-minute segments.

You ca n m an ua ll y ch ang e th e re si st anc e of t he

pedals as desired during the workout by pressing the Quick Resistance buttons.

Note: If you manually change the resistance during

a calorie goal workout, the length of the workout will adjust automatically to ensure that you meet your calorie goal.

The workout will continue in this way until the calo-

rie, distance, or time goal is reached.

To p a us e t h e w or k ou t , p re s s t he Pa us e/ En d b u t-

4. Follow your progress with the display.

As you exercise, the calories, time, or distance

display will count down until the desired goal is reached.

See step 4 on page 19.

5. Measure your heart rate if desired.

See step 5 on page 20.

6. Turn on the fan if desired.

See step 6 on page 21.

7. When you are finished exercising, the console will turn off automatically.

See step 7 on page 21.

Page 24

HOW TO USE AN IFIT WORKOUT

You mu st ha ve a n iF it mo du le t o us e a n iF it w or ko ut.

To purchase an iFit module at any time, go to www.iFit.com or call the telephone number on the front cover of this manual.

Press the Map button, the Train button, or the Lose

Wt. button to download the next workout of that type in your schedule.

Press the Compete button to compete in a race

that you have previously scheduled.

Note: To use an iFit module, you must have access to a computer with an internet connection and a USB port. You will also need an iFit.com membership. To use a wireless iFit module, you must also have your own wireless network including an 802.11b/g/n router with SSID broadcast enabled (hidden networks are not supported).

1. Begin pedaling or press any button on the console to turn on the console.

When you turn on the console, the display will turn

on. The console will then be ready for use.

2. Insert the iFit module into the console.

To use an iFit workout, make sure that the iFit mod-

ule is inserted in the console.

IMPORTANT: To satisfy exposure compliance

requirements, the antenna and transmitter in the iFit module must be at least 8 in. (20 cm) from all persons and must not be near or connected to any other antenna or transmitter.

Press the Track button to re-run a recent iFit work-

out from your schedule. Next, press the increase and decrease buttons to select the desired workout. Then, press the Enter button to start the workout.

For more information about the iFit workouts,

please see www.iFit.com.

When you select an iFit workout, the display will

show the duration of the workout and the approximate number of calories you will burn. The display may also show the name of the workout. If you select a competition workout, the display may count down to the beginning of the race.

Note: The iFit buttons may also run demo work-

outs. To use the demo workouts, remove the iFit module from the console and press one of the iFit buttons.

5. Start the workout.

See step 3 on page 22.

3. Select a user.

If more than one user is registered on your iFit

account, you can switch users in the iFit main screen. Press the increase and decrease buttons next to the Enter button to select a user.

4. Select an iFit workout.

To select an iFit workout, press one of the iFit but-

tons. Before some workouts will download, you must add them to your schedule on www.iFit.com.

During some workouts, an audio coach will guide

you through your workout. You can select a setting for the audio coach (see HOW TO CHANGE CONSOLE SETTINGS on page 26).

To p a us e t h e w or k ou t , p re s s t he Pa us e/ En d b u t-

Page 25

6. Follow your progress with the display.

7. Measure your heart rate if desired.

See step 4 on page 19.

The My Trail tab will show a map of the trail and the

number of laps you complete.

During a competition workout, the Compete tab

will show your progress in the race. As you race, the top line in the matrix will show how much of the race you have completed. The other lines will show other competitors. The end of the matrix represents the end of the race.

See step 5 on page 20.

8. Turn on the fan if desired.

See step 6 on page 21.

9. When you are finished exercising, the console will turn off automatically.

See step 7 on page 21.

For more information about the iFit mode, go to www.iFit.com.

Page 26

HOW TO CHANGE CONSOLE SETTINGS

1. Select the settings mode.

To select the settings mode, press the gear button.

Units—The currently selected unit of measurement

will appear in the display. To change the unit of measurement, press the Enter button repeatedly. To v i ew di s ta n ce in mi l es , s e le c t EN GL IS H . To vi ew distance in kilometers, select METRIC.

The display will show the total number of hours

that the exercise bike has been used and the total distance (in miles or kilometers) that has been pedaled on the exercise bike.

If an iFit module is connected to the console, the

display will show the words WIFI MODULE or USB MODULE.

If no module is connected, the display will show

the words NO IFIT MODULE. If no module is connected, some of the settings options will not be available.

2. Navigate the settings mode.

While the settings mode is selected, the matrix of

the display will display several optional screens. Press the decrease button next to the Enter button repeatedly to select the desired optional screen.

The lower section of the display will show instruc-

tions for the selected optional screen. Make sure

to follow the instructions shown in the lower part of the display.

Contrast Level—The currently selected contrast

level will appear in the display. Press the Quick Resistance increase and decrease buttons to adjust the contrast level.

Trainer Voice—The currently selected setting for

the audio coach will appear in the display. Press the Enter button repeatedly to turn the audio coach ON or OFF.

Default Menu—The default menu will appear when

you press the Home button. Press the Enter button repeatedly to select the manual mode or the iFit menu as the default menu.

Check Status—The words CHECK WIFI STATUS

or CHECK USB STATUS will appear in the display. Press the Enter button. After a few seconds, the status of the iFit module will appear in the display. To e x it th i s d is p la y, p re s s t he ge a r b ut t on .

Send/Receive—The words SEND/RECEIVE DATA

will appear in the display. Press the Enter button. The console will then check for iFit workouts and firmware downloads.

3. Change settings as desired.

Demo—The console features a display demo

mode, designed to be used if the exercise bike is displayed in a store. Press the Enter button repeatedly to turn the demo mode ON or OFF.

4. Exit the settings mode.

Press the gear button to exit the settings mode.

Page 27

MAINTENANCE AND TROUBLESHOOTING

MAINTENANCE

Regular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the exercise bike is used. Replace any worn parts immediately.

To c l ea n t h e e xe r ci s e b ik e , u se a da mp c l ot h a n d a small amount of mild soap. IMPORTANT: To avoid

damage to the console, keep liquids away from the console and keep the console out of direct sunlight.

CONSOLE TROUBLESHOOTING

If lines appear in the console display, see step 3 on page 26 and adjust the contrast level of the display.

If the console does not display your heart rate when you use the handgrip heart rate monitor, see step 5 on page 20.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the reed switch should be adjusted.

To a d ju s t t he reed switch,

first unplug the power adapter. Next,

use a standard screwdriver to carefully remove the Shield Cover (26) from the Left and Right Shields (37, 58).

37, 58

Locate the Reed Switch (64). Loosen, but do not remove, the M4 x 19mm Screw (11).

Next, rotate the Left Crank Arm (35) until a Magnet (54) is aligned with the Reed Switch (64). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 19mm Screw (11).

Plug in the power adapter and rotate the Left Crank Arm (35) for a moment. Repeat these actions until the console displays correct feedback.

When the reed switch is correctly adjusted, reattach the shield cover.

Page 28

HOW TO ADJUST THE DRIVE BELT

If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the highest level, the drive belt may need to be adjusted.

Using an M10 socket wrench with an extension (not included), reach into the opening in the bottom of the Right Shield (58) and tighten the M10 x 50mm Screw (49) a few turns until the Drive Belt (not shown) is tight;

do not overtighten the Drive Belt.

To a d ju s t t he dr i ve be l t, first unplug the power adapter. Next, carefully tip the exercise bike onto its

left side as shown.

Then, tip the exercise bike upright. Repeat this process, if necessary, until the pedals no longer slip.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Page 29

EXERCISE GUIDELINES

WARNING: Before beginning this

or any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems.

The heart rate monitor is not a medical device. Variou s facto rs may affect the acc uracy o f heart rate readings. The heart rate monitor is intended only as an exercise aid in determining heart rate trends in general.

These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your heart rate as a guide to find the proper intensity level. The chart below shows recommended heart rates for fat burning and aerobic exercise.

Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone. For maximum fat burning, exercise with your heart rate near the middle number in your training zone.

Aerobic Exercise—If your goal is to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone.

WORKOUT GUIDELINES

Warming Up—Start with 5 to 10 minutes of stretch-

ing and light exercise. A warm-up increases your body temperature, heart rate, and circulation in preparation for exercise.

Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise ; never hold your breath.

To f i nd th e p r op e r i nt e ns i ty le v el , fi nd yo u r a ge at th e bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your age define your “training zone.” The lowest number is the heart rate for fat burning, the middle number is the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise.

Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles and helps to prevent post-exercise problems.

EXERCISE FREQUENCY

To m a in t ai n o r i m pr o ve yo u r c on d it io n, c o mp l et e t h re e workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Remember, the key to success is to make exercise a regular and enjoyable part of your everyday life.

Page 30

PART LIST

K e y N o . Q t y . D e s c r i p t i o n K e y N o . Q t y . D e s c r i p t i o n

Model No. PFEX62715.0 R0915B

1 1 Tablet Holder 2 8 M4 x 16mm Screw 3 1 Console Cover 4 1 Handlebar 5 2 Handlebar Cap 6 2 Pulse Sensor 7 1 Console 8 3 Fastener 9 1 M4 x 19mm Bright Screw 10 1 Clamp 11 2 M4 x 19mm Screw 12 1 Seat 13 2 Carriage Cap 14 1 Seat Bracket 15 1 Seat Carriage 16 8 M8 Split Washer 17 10 M8 Locknut 18 1 Seat Post 19 1 Seat Knob 20 2 #8 x 3/4" Screw 21 1 Seat Post Bushing 22 1 Seat Post Cap 23 1 Pulse Wire Harness 24 2 M8 x 58mm Bolt 25 1 Main Wire Harness 26 1 Shield Cover 27 1 Upright 28 1 Seat Post Knob 29 9 M8 x 20mm Screw 30 1 Power Adapter 31 1 Power Receptacle/Wire 32 1 Left Pedal/Strap 33 2 Crank Cap 34 2 Crank Nut

35 1 Left Crank Arm 36 4 M4 x 19mm Self-tapping Screw 37 1 Left Shield 38 2 Snap Ring 39 2 Bearing 40 4 M4 x 12mm Screw 41 1 Resistance Cable 42 1 Resistance Motor 43 2 Stabilizer Cap 44 1 Rear Stabilizer 45 2 Leveling Foot 46 4 M8 x 70mm Screw 47 2 M10 Flange Nut 48 1 Eddy Mechanism 49 1 M10 x 50mm Screw 50 1 Frame 51 1 Idler 52 1 M6 Washer 53 1 M6 x 20mm Screw 54 2 Magnet 55 1 Pulley 56 1 Crank 57 1 Drive Belt 58 1 Right Shield 59 1 Right Crank Arm 60 1 Right Pedal/Strap 61 2 M10 x 41mm Screw 62 2 Wheel 63 1 Front Stabilizer 64 1 Reed Switch/Wire 65 4 #8 x 5/8" Screw * – Assembly Tool * – User’s Manual

Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.

Page 31

EXPLODED DRAWING

Model No. PFEX62715.0 R0915B

Page 32

ORDERING REPLACEMENT PARTS

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:

• the model number and serial number of the product (see the front cover of this manual)

• the name of the product (see the front cover of this manual)

• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual)

LIMITED WARRANTY

IMPORTANT: To protect your fitness equipment with an extended service plan, see page 5.

ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The frame is warranted for the lifetime of the original purchaser (customer). Parts and labor are warranted for one (1) year from the date of purchase.

This warranty extends only to the original purchaser (customer). ICON’s obligation under this warranty is limited to repairing or replacing, at ICON’s option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to a service center, freight charges to and from the service center will be the customer’s responsibility. If replacement parts are shipped while the product is under warranty, the customer will be responsible for a minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend to freight damage to the product. This warranty will automatically be voided if the product is used as a store display model, if the product is purchased or transported outside the USA, if all instructions in this manual are not followed, if the product is abused or improperly or abnormally used, or if the product is used for commercial or rental purposes. No other warranty beyond that speciﬁ cally set forth above is authorized by ICON.

ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of property, loss of revenues or proﬁ ts, loss of enjoyment or use, or costs of removal or installation; or other consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to the customer.

The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of merchantability or ﬁ tness for a particular purpose are limited in their scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to the customer.

This warranty provides speciﬁ c legal rights; the customer may have other rights that vary from state to state.

ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813