LCD Battery Control
PP BT-124LCD
Instruction Manual
of LCD Battery Tester series
LCD Battery monitoring for
all kinds of 12V and 24V lead acid batteries
One unit, three Options
Switch mode
Backlight mode
PP BT-124LCD
GB
Battery Control
Instruction Manual of
LCD Battery Tester series
Model No. BT-124LCD
Art. Number 2.913.900
LCD Battery Control
LCD Battery monitoring for
all kinds of 12V and 24V lead acid batteries
One unit, three Options
Switch mode
1
Backlight mode
Battery Control
Caution:
BT-124LCD is designed for using with 12V or 24V all kind of lead acid
battery. It is not recommended to use in other kind of re-chargeable dry
cell battery.
General Safety Caution:
We the axhess GmbH & Co. KG are not liable for any darnages and consequences
resulting from:
1. Connection and installations errors.
2. Damage to the device due to mechanical infl uences or voltage
surges or any modifi cation to the device.
3. Any unauthohzed manipulation to the product leads to cancellation
of the Warranty.
4. Use of the deviee for purposes other than deseribed in the
instruction manual.
5. Any infl uence of fl uids.
6. Do not use the device in a damp or wet environment.
7. Do not use or store the device close to fl ammable material.
8. Do not use the device in an environment with explosives.
9. During the product in use:
-Make sure the device is always positioned in a safe place.
-The device must be placed out of reach of children.
-Do not expose the device to direct sun light or other heat solutions.
10. Cleaning: -Do not use any liquid cleaning product. -Do not use any infl a
nunable eleaning produet. -Do not submerge die device into liquid or spill
any liquids over it. -If needed, clean the device with a light damp, soft cloth.
GB
2
GB
Battery Control
Warning:
1. It is not a toy graded product. Please keep children away of this product.
2. This product contents fragile portion, please place it at a safety, dry area
after use.
3. BT-124LCD should be used with the special cables which packaged
together with the unit.
4. Do not try to adapt other cables with the product.
5. There are no replaceable components inside the product.
6. Do not try to re-open the unit for repair. You can not open the product
with out demage the item.
7. In case the product has found malfunctioned, please consult to
your retail dealer.
CABLE ACCESSORIES:
3 sets detachable cable accessory are included with the BT-124LCD main unit
1. Cable with eyelet terminals, for permanently attaching to motorcycle battery.
2. Cable with Cigar lighter plug, for connecting the battery via car lighter socket.
3. Cable with alligator clips, for connecting the positive post (Red color) and
negative post (Black color) of the battery directly.
3
Do not cut, do not extend the cables !
Defective cables must be replaced immed. Ask your dealer for spare
cables in case of defective cable.
Battery Control
BT-124LCD is contented 3 sets connect cable, which is designed for easier adapting to any methods of battery connection. Do not try to attach the unit with the
cable set other than this 3 connecting cables.
1. Cable with eyelet, for permanently attaching to motorcyle battery or other
seasonal in use batteries .
2. Cable with Cigar lighter plug, for connectingthe battery via car lighter socket.
3. Cable with alligator clips, for connecting the positive post (Red color) and
negative post (Black color) or the battery directly.
Steps of operation: BT-124LCD
1. Connect the cable harness to BT-124LCD.
GB
4
GB
Battery Control
2. Connect the battery with the cable set which come with the Battery
Tester unit.
3. Select the appropriated battery voltage ( 12V oder 24V )
4. The 4 digits battery voltage is appeared on the display.
Please read the explanation of symbols at the back side of main unit.
5. Press the button for back illumining of display, if necessarry.
5
Battery Control
6. In some case, the LCD meter of BT-124LCD will not be appeared if the battery
voltage is as low as 5.0V.
7. While LED of “Deep discharged” is illumined steadily. It means the battery is
being deep discharged or defected.
8. The battery is requested to be re-charged immediately or have the battery
replaced.
The battery at Poor situation, it needs to be recharged prior to use
The battery at Fair situation, it needs to be recharged but still can be used in short period
The battery is Fully charged, it is ready to use.
It is indicated the charging system or the car
alternator which connects to battery is working
properly.
It is indicated the charge is still ongoing, but the
battery is getting full very soon.
The battery is probably being overcharged.
The battery is out of the range or it has been
damage seriously
The battery is detected under 11.0V. The battery is
requested to be charged immediately prior to use.
The battery is detected lower than 5.0V. The battery is
requested to be charged immediately prior to use, or
have the battery replaced.
GB
6
GB
Battery Control
Remark:
The LED and LCD wou(d not be operated when the battery‘s voltage detects as
low as 4.OV. This is recognized as a defected battery.
Warranty:
The device is subject to the general warranty conditions of
axhess GmbH & Co. KG which applies only to maimfacturing and material
defects. Should the device be defective, please retum it to the place of purchase.
For wan-anty work and services please ineiude the copy of Receipt with
purchase date, reason for reclaination, short cut deseription of problem The
warranty time is 24 month. It starts with the date of purchase. ( Keep your reeeipt
Warranty is only available to the fi rst buyer of this product.
Recycling Packing:
The packing can be recycled. Please put the packing material only into the
respective recycling bins. Disposal of the device: Once the device cannot be
used anymore, please take it to the approphate collection points pursuant to the
applicable laws / regulations. lf you are not sure where to take it, please contact
the respective recycle centre or the communal authorifi es. DO NOT PUT THE
PRODUCT IN THE REGULÄR GARBAGE COLLECTION!!
7
Battery Control
Technical Data:
Article Description BT 124LCD Battery Tester, Battery Control
Art. Nummer 2.913.900
hinput Voltage 12V oder 24V
Select Voltage Switch to 12V or 24V
Display working range 5,0V bis max. 39,9V
Accuracy + - 0,1V
Permanent Voltage absorbtion 5,9 mA bei 12V oder 11,6 mA bei 24V
Autornatie shut down 5,0V und kleiner die LCD,
3,0V und kleiner, die LED.
Tempreatur range von -10°C bis max. 45°C
Measurement 30 x 88 x 60 mm ( H x L x W mm)
Produet Weight Lenght of 0,058 kg
eyelet terminal cable 38 cm , Kabel mit Ringösen
43 cm , Kabel mit 12V Stecker
42 cm , Kabel mit Alligator Clips
Fuse No fuse
IP Class 20
Lifetime of back up Light 30.000 hrs ( bulb not replaceable )
Declaratrion of Conformity:
We the, axhess GmbH & Co. KG,D-53547 Hausen
declare in our own sole responsibility, that the
product LCD Battery Control, BT-124LCD,
Item Number 2.913.900
is refering to this decalration, is in accordance with the
EU Directive
2004/108/EC
EN 6 1000-6-3 : 2007
EN 6 1000-6-1 : 2007
Hausen, 01.06.2008, Axel Hess, General Manager.
GB
8
Battery Control
LCD Battery Control
Instruction Manual
of LCD Battery Tester series
Modell Nummer BT-124LCD
LCD Battery Control
GB
Art Nr.: 2.913.900
www.axhess.de
Loading...