Proel WM600 USER’S MANUAL

WM600

Wireless Microphone System

USER’S MANUAL

ITALIANO

ENGLISH

96MAN00055 REV.08/12

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT...................................................................	3
SAFETY INSTRUCTIONS ............................................................................................................................	3
IN CASE OF FAULT....................................................................................................................................	4
PACKAGING, SHIPPING AND COMPLAINT ...............................................................................................	4
WARRANTY AND PRODUCTS RETURN.....................................................................................................	4
MAINTENANCE AND DISCLAIMER ...........................................................................................................	4
POWER SUPPLY........................................................................................................................................	4
USER’S WARNINGS AND CE CONFORMITY..............................................................................................	5
INTRODUCTION .......................................................................................................................................	6
DESCRIPTION ...........................................................................................................................................	6
WM600D RECEIVER .................................................................................................................................	6
WM6M HANDHELD TRANSMITTER .........................................................................................................	7
WM6H BODYPACK TRANSMITTER...........................................................................................................	7
TECHNICAL SPECIFICATIONS....................................................................................................................	8

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the enviroment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their

local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

SAFETY INSTRUCTIONS

CAUTION Before using this product read carefully the following safety instructions. Take a look of this manual entirely and preserve it for future reference. When using any electric product, basic precautions should always be taken, including the following:

To reduce the risk, close supervision is necessary when the product is used near children.

Protect the apparatus from atmospheric agents and keep it away from water, rain and high humidity places.

This product should be site away from heat sources such as radiators, lamps and any other device that generate heat.

Care should be taken so that objects and liquids do not go inside the product..

The product should be connected to a power supply only of the type described on the operating instructions or as marked on the product.

IN CASE OF FAULT

In case of fault or maintenance this product should be inspected only by qualified service personnel when:

Liquids have spilled inside the product.

The product has fallen and been damaged.

The product does not appear to operate normally or exhibits a marked change in performance.

Do not operate on the product, it has no user serviceable parts inside.

Refer servicing to an authorized maintenance centre.

PACKAGING, SHIPPING AND COMPLAINT

This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit conditions immediately after unpacking it.

If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspection.

Proel is not responsible for any damage that occurs during shipment..

Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.

Possible damages to unit should be immediately notified to forwarder. Each complaint for manumitted package should be done within eight days from product receipt.

WARRANTY AND PRODUCTS RETURN

Proel products have operating warranty and comply their specifications, as stated by manufacturer..

Proel warrants all materials, workmanship and proper operation of this product for a period of two years from the original date of purchase. If any defects are found in the materials or workmanship or if the product fails to function properly during the applicable warranty period, the owner should inform about these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect detailed description. This warranty does not extend to damage resulting from improper installation, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been properly used and warranty is still valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any "direct damage" or "indirect damage" caused by product defectiveness.

MAINTENANCE AND DISCLAIMER

Clean only with dry cloth.

Proel products have been expressly designed for audio application, with signals in audio range (20Hz to 20kHz). Proel has no liability for damages caused in case of lack of maintenance, modifications, improper use or improper installation non applying safety instructions.

Proel S.p.A. reserves the right to change these specifications at any time without notice..

Proel S.p.A. declines any liability for damages to objects or persons caused by lacks of maintenance, improper use, installation not performed with safety precautions and at the state of the art.

POWER SUPPLY

This apparatus should only be connected to power source type specified in this owner’s manual or on the unit.

If the supplied AC power cable plug is different from the wall socket, please contact an electrician to change the AC power plug.

Hold the plug and the wall outlet while disconnecting the unit from AC power.

If the unit will not be used for a long period of time, please unplug the power cord from AC power outlet.

To avoid unit power cord damage, please do not strain the AC power cable and do not bundle it.

In order to avoid unit power cord damage, please ensure that the power cord is not stepped on or pinched by heavy objects.

USER’S WARNINGS AND CE CONFORMITY

LICENSING INFORMATION: This radio equipment operates in the 863 865 MHz harmonized European band dedicated to SRD (short range devices) like wireless microphone and IEM personal monitor systems, so in the countries specified in the below table no personal license is required for use it.

The use of this wireless microphone equipment in some countries could be intended for professional use, so the licensability depends on the country it operates. Proel suggests the user to contact the appropriate telecommunications authority concerning proper licensing.

This equipment may be capable of operating on some frequencies not authorized in your country. Please contact your national authority to obtain information on authorized frequencies for wireless microphone products in your region.

The product is in compliance with Directive LVD 2006 / 95 / EC as stated in EN 60065 and EN 50371 standard.

PROEL S.p.A hereby, declares that this wireless microphone system complies with the essential requirements and other relevant provisions of Directive R&TTE 1999 / 5 / EC as stated in EN 300422 1; EN 300422 2; EN 301489 01; EN 300489 09 standard.

The full and detailed declaration of conformity can be downloaded from the web site: www.proel.com

TABLE OF THE AUTHORIZED FREQUENCIES FOR THE WM600 WIRELESS MICROPHONE SYSTEM IN EUROPE UPDATED WITH REFERENCE TO ERC REC 70 03E DOCUMENT DATED AUGUST 22 2011

COUNTRY CODE	WM6H / WM6M TRANSMITTING FREQUENCIES

	863.100	863.900	864.500	864.900

AT BE CY CZ DK EE DE GR HU IT LV LT LU NL	•	•	•	•
PL PT SK SI SE GB IS LI CH BG RO TR UA IE
MT NO ES

HR		Individual license required

GE RU			NOT IMPLEMENTED

IN ALL COUNTRIES THE USE OF WIRELESS MICROPHONES SYSTEMS IS SUBJECT TO ANY TELEVISION AND

BROADCAST TRANSMISSION

CONSULT LOCAL OR NATIONAL RADIO SPECTRUM AUTHORITIES FOR INFORMATION ON POSSIBLE RESTRICTIONS OR NECESSARY AUTHORIZATIONS BEFORE USING THIS SHORT RANGE DEVICE.

INTRODUCTION

Thank you for choosing this PROEL product and for your trust in our brand, synonymous of professionalism, accuracy, high quality and reliability. All our products are CE approved and designed for continuous use in professional systems.

DESCRIPTION

The WM600 Wireless Microphones series is a UHF, PLL controlled and programmed frequency device, which provides a reliable, high quality signal transmission.

WM600 Wireless Microphone system features 3 units: WM600 receiver, WM6M handheld transmitter and WM6H body pack transmitter. The system is available in two different configurations, each of them including an ABS carrying case:

WM600M: WM600 + WM6M

WM600H: WM600 + WM6H + lavalier + headset

Four channel frequencies are available, which have been accurately selected to allow the simultaneous use of

4 devices without interference between them:

1.863.100 MHz

2.863.900 MHz

3.864.500 MHz

4.864.900 MHz

WM600 RECEIVER

See FIG. 1 at page 15:

1.DC IN Socket for the AC/DC adaptor connection, use only the adaptor supplied with the system.

2.OUTPUT (UNBALANCED) Unbalanced output with line level: connect it through a mono 6.3mm jack cable to a mixer input.

3.OUTPUT (BALANCED) Balanced output with mic level: connect it through a XLR cable to a mixer input.

4.POWER On/off switch.

5.ON Red LED: if lighted states that the power supply is present and the receiver is turned on.

6.RF Green LED: if lighted states that the transmitter is sending a radio signal to the receiver.

7.AF Red LED: illuminates when an audio signal is present.

8.SET Keep this button pressed until the number flashes and then push it again to set the receiver channel.

9.CHANNEL NUMBER The display shows the channel number, that must correspond to the channel set on the transmitter.

10.VOLUME Volume potentiometer: set this control to a proper level that doesn’t saturate the mixer input channel.

11.ANTENNA These are the receiving antennas. Raise them up during the use and, to obtain a better reception, place the receiver away from other metal objects and no more distant than 30m from the transmitter.

+ 14 hidden pages