compact WD10AV2 is able to offer a high-performance monitoring also on small stages and it ‘s the ideal solution for speech, vocals and
keyboards. WD12AV2, with its high SPL and its full-range response, is the favorite choice for vocals, guitar, horns and electronic instruments
or as a high-power monitor for DJs. WD15AV2, with its full extension and powerful and deep response at the low frequencies, is the ideal
monitor for bass and drums players. The horn-loaded HF section and the powerful amplifier make it the perfect solution for monitoring also
on very large stages.
• Active 2-way coaxial stage monitor
• 1” horn-loaded compression driver with 1.35” VC
• 15” woofer with 3” VC
• 450 W total power (900 W peak)
• 400 W class D + 50 W class AB power module with SMPS
• Dual LIMITER circuit
• 2 EQ PRESETS for Monitor or FOH (Front-Of-House) use
• SPL MAX 126 dB
• Frequency response 45 Hz - 20 KHz
• Low-profile, lightweight plywood cabinet with black ultra-durable polyurethane paint
• Reinforced metal grille with dust protection
• Recessed connection panel for added protection
• 2 recessed handles for easy transport
• Pole socket
Technical Specifications
System type 2-way coaxial vented stage monitor
Low Frequency Device 15” woofer with 3"VC
High Frequency Device 1” compression driver with 1.35"VC
Angular Coverage 60°
Frequency response 45 Hz - 20 kHz
Max SPL at 1mt (peak) 126 dB
Amplifier Continuous
Power
HF: 50 W CLASS AB, LF: 400W CLASS D with
SMPS
Input Impedance 30 kohm balanced, 15 kohm unbalanced
Input Sensitivity 0 dBu
Controls
LEVEL, PRESET selector (MONITOR, FOH), GND
lift
Connectors INPUT: COMBO (XLR-F/JACK), LINK: XLR-M
Power Supply 230 VAC or 120 VAC - 50/60 Hz
Maximum Consumption 575 W